• Keine Ergebnisse gefunden

6M-F / 2M-F /1M-F

N/A
N/A
Protected

Academic year: 2022

Aktie "6M-F / 2M-F /1M-F"

Copied!
2
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

Ultimate speed at unchanged high quality

PILATUS 6M-F / 2M-F / 1M-F

(2)

Based on our well-known PILATUS 6M, 2M and 1M de- tector systems, DECTRIS is launching the new PILATUS 6M-F, 2M-F and 1M-F. These detectors enable data ac- quisition at massively higher frame rates – a two-fold in- crease for the 6M-F, 2M-F and up to a four-fold increase for the 1M-F. All other technical specifications, including the detector operation, are identical to the standard ver- sions of the PILATUS detectors, including the readout time per module of 2.3 ms.

Technical specifications Framing speeds

1M: 35 Hz 1M-F: 135 Hz

2M: 31 Hz 2M-F: 60 Hz

6M: 13 Hz 6M-F: 25 Hz

[1] Acta Cryst., D66, 1032–1035 (2010).

Advantages

• Massive framing speed increase

• Otherwise identical technical specifications and detector operation

• Upgrade possibility for existing detector systems

Key features of PILATUS detectors

• Direct detection of X-rays in single-photon-counting mode

• Radiation-tolerant design

• High dynamic range

• Short readout time

• Shutterless operation

• High local and global counting rates

• No dark current and readout noise

• Adjustable threshold to suppress fluorescence

• Excellent point-spread function The massive speed increase allows faster data collection with the same high quality as before. This makes the fast PILATUS detectors the instrument of choice for high throughput beamlines, and in particular for time-resolved experiments and phase transformation studies as well as scanning beam applications.

Existing installations of PILATUS 6M, 2M and 1M detec- tors can be upgraded to the fast versions. Upgrades take place on-site and include a replacement of the detector server and changes to the detector electronics.

10 20 30 40 50 60 70 80 90

0 0

4 Hz 8.3 Hz 25 Hz

0.1 0.2 0.3 0.4

Resolution [1/Å2]

I/

0.5 0.6 0.7 0.8 0.9

5%

10%

15%

20%

25%

30%

0%

0

4 Hz 8.3 Hz 25 Hz

0.1 0.2 0.3 0.4

Resolution [1/Å2] Rmeas

0.5 0.6 0.7 0.8 0.9

Applications

• Raster-scanning crystal charac- terization [1]

• Time-resolved studies

• Macromolecular crystallography

• Small molecule crystallography

• Small angle X-ray scattering and scanning SAXS

• Phase transformation studies

• Diffuse scattering experiments

• Coherent diffractive and ptychographic imaging DECTRIS Ltd.

Neuenhoferstrasse 107 5400 Baden

Switzerland

+41 56 500 2100 phone +41 56 500 2101 fax sales@dectris.com www.dectris.com

PILATUS 6M-F / 2M-F / 1M-F

Speed comparison using lysozyme crystals and a PILATUS 6M-F. 180-degree datasets were col- lec ted at 4 Hz, 8.3 Hz and 25 Hz framing rate at constant angular speed. Datasets are of high quality at all framing rates (data courtesy of Dr. V. Olieric, PX beamline X06SA, PSI, Villigen, Switzerland).

Referenzen

ÄHNLICHE DOKUMENTE

ZF von über 50 MHz betrieben, dann liegt die Spiegelfrequenz außerhalb des Empfangsbereiches, und die Eingangs-Selektion kann eigentlich entfallen. 70 MHz

Bei der Rekursionsformel (1) müssen zur Berechnung einer Fibonacci-Zahl die beiden unmittelbar vorangehenden Fibonacci-Zahlen bekannt sein... Als Koeffizienten ergeben sich

Im Beispiel der Abbildung 2 wurde mit dem Goldenen Schnitt (Walser 2013) gefuhr- werkt... 6., bearbeitete und

Es wird eine mir bislang nicht bekannte

Δ f das heißt: Änderung der Frequenz, wobei die Tonhöhe die Geschwindigkeit der Frequenzänderungen bewirkt. Je größer die Lautstärke

Annahme: A ist wahrheitsfunktional wahr [falsch]. Schritt 1: Ermittle die Anzahl der Wahrheitswertzuordnungsfragmente für den Satz A. Wenn das Tableau für {¬A} [für {A}]

Eine beschränkte reelle Folge konvergiert monoton wachsend ist.. In dem Fall ist also die

In der Vorlesung wurde die Laufzeit rekursiv formuliert und das Mastertheorem verwendet, um zu zeigen, dass die Laufzeit von Mergesort in On log n liegt.. a Verwenden Sie dazu