• Keine Ergebnisse gefunden

56a, 670–676 (2001).Corrected Tables 1–3: , Measured by a Computerized Direct Current Method, Z. Naturforsch. H.-Y. Hsu and C.-C. Yang, Conductivities of Room Temperature Molten SaltsContaining AlCl Erratum

N/A
N/A
Protected

Academic year: 2022

Aktie "56a, 670–676 (2001).Corrected Tables 1–3: , Measured by a Computerized Direct Current Method, Z. Naturforsch. H.-Y. Hsu and C.-C. Yang, Conductivities of Room Temperature Molten SaltsContaining AlCl Erratum"

Copied!
1
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

Erratum

208 Erratum

H.-Y. Hsu and C.-C. Yang, Conductivities of Room Temperature Molten Salts Containing AlCl3, Measured by a Computerized Direct Current Method, Z. Naturforsch. 56a, 670 – 676 (2001).

Corrected Tables 1 – 3:

Nachdruck – auch auszugsweise – nur mit schriftlicher Genehmigung des Verlages gestattet Verantwortlich für den Inhalt: A. KLEMM

Satz und Druck: Konrad Triltsch, Print und digitale Medien GmbH, Ochsenfurt/Hohestadt Table 1. Parameters for the electrical conductivity equation of binary melts AlCl3-BPC.

Melt composition a¥105 b¥105 106 R squared Temp. °C 40 mole% AlCl3 14.097 0.76966 2.1375 0.99998 35–80 50 mole% AlCl3 –33.410 23.47871 1.4041 0.99998 35–80 60 mole% AlCl3 9.359 21.98310 0.9665 0.99980 35–80 70 mole% AlCl3 408.312 4.22539 2.3712 0.99950 35–80

Table 2. Parameters for the electrical conductivity equation of binary melts AlCl3-EMIC.

Melt composition a¥103 b¥104 106 R squared Temp. °C 30 mole% AlCl3 0.9579 –0.5910 3.8 0.99983 30–80 40 mole% AlCl3 1.540 2.116 3.0 0.99837 30–80 50 mole% AlCl3 7.429 5.680 0.887 0.99949 30–80 60 mole% AlCl3 –0.3785 4.927 0.27 0.99942 30–80

Table 3. Parameters for the electrical conductivity equation of binary melts AlCl3-BTEAC.

Melt composition a¥103 b¥105 106 R squared Temp. °C 40 mole% AlCl3 3.4973 –12.52 1.265 0.99996 50–130 50 mole% AlCl3 2.173 –9.53 1.3 0.99999 50–130 60 mole% AlCl3 2.7207 –10.369 1.207 0.99998 50–130 70 mole% AlCl3 0.488 –2.621 0.8279 0.99993 30–80

Referenzen

ÄHNLICHE DOKUMENTE

The most common way to achieve site-selectivity in direct C – H bond activation on arenes is the use of a directing group, which is usually placed in the ortho-position to the C –

Mittelwertsatz der Integralrehnung" angewendet: der

Die Kollinearität ergibt sich auch, wenn die beiden Startpunkte auf verschiedenen Ästen der Hyperbel liegen (Abb... 2: Punkte auf

Related to C–H activation and cross-coupling chemistry, the oxidative addition (Scheme 1.21a) requires an electron-rich transition metal in a low oxidation

[138] Compared to conventional multistep syntheses, direct HIE by either acid/base-mediated labeling, heterogeneous or homogeneous catalysis seems more attractive

쑔 2014 Walter de Gruyter GmbH, Berlin/Boston Satz: Konrad Triltsch, Print und digitale Medien GmbH, Ochsenfurt Druck und buchbinderische Verarbeitung: Hubert & Co.

[r]

[r]