LW T6SG
Enhanced optical Power LED (ThinGaN) Lead (Pb) Free Product - RoHS Compliant
OS-IN-2009-009
Besondere Merkmale
• Gehäusetyp: weißes P-LCC-2 Gehäuse, eingefärbter diffuser Silikon - Verguss
• Besonderheit des Bauteils: erhöhte Lebensdauer durch verbesserten Verguss
• Farbort: x = 0,33, y = 0,33 nach CIE 1931 (weiß)
• typische Farbtemperatur: 5600 K
• Farbwiedergabeindex: 80
• Abstrahlwinkel: Lambertscher Strahler (120°)
• Technologie: ThinGaN
• optischer Wirkungsgrad: 50 lm/W
• Gruppierungsparameter: Lichtstärke, Farbort
• Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet
• Lötmethode: Reflow Löten und Wellenlöten (TTW)
• Vorbehandlung: nach JEDEC Level 2
• Gurtung: 8-mm Gurt mit 2000/Rolle, ø180 mm oder 8000/Rolle, ø330 mm
• ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D
Anwendungen
• Informationsanzeigen im Außenbereich
• Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung)
• Ersatz von Kleinst-Glühlampen, Leselampen
• Rettungsnotleuchten
• Signal- und Symbolleuchten
• Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.)
Features
• package: white P-LCC-2 package, colored diffused silicone resin
• feature of the device: long lifetime due to enhanced resin material
• color coordinates: x = 0.33, y = 0.33 acc. to CIE 1931 (white)
• typ. color temperature: 5600 K
• color reproduction index: 80
• viewing angle: Lambertian Emitter (120°)
• technology: ThinGaN
• optical efficiency: 50 lm/W
• grouping parameter: luminous intensity, color coordinates
• assembly methods: suitable for all SMT assembly methods
• soldering methods: reflow soldering and TTW soldering
• preconditioning: acc. to JEDEC Level 2
• taping: 8 mm tape with 2000/reel, ø180 mm or 8000/reel, ø330 mm
• ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D
Applications
• outdoor displays
• backlighting (LCD, switches, keys, displays, illuminated advertising)
• substitution of micro incandescent lamps, reading lamps
• emergency lighting
• signal and symbol luminaire
• marker lights (e.g. steps, exit ways, etc.)
2009-04-15 2
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 7 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LW T6SG-V1AA-JKPL bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen V1, V2 oder AA enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Farbortgruppe geliefert. Z.B.: LW T6SG-V1AA-JKPL bedeutet, dass auf dem Gurt nur eine der Farbortgruppen -JK bis -PL enthalten ist (siehe Seite 5 für nähere Information).
Um die Liefersicherheit zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden.
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 7 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LW T6SG-V1AA-JKPL means that only one group V1, V2 or AA will be shippable for any one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LW T6SG-V1AA-JKPL means that only 1 chromaticity coordinate group -JK to -PL will be shippable (see page 5 for explanation).
In order to ensure availability, single chromaticity coordinate groups will not be orderable .
Bestellinformation
Ordering Information Typ
Type
Emissions- farbe
Color of Emission
Lichtstärke
1) Seite 18Luminous Intensity
1) page 18I
F= 20 mA I
V(mcd)
Lichtstrom
2) Seite 18Luminous Flux
2) page 18I
F= 20 mA Φ
V(mlm)
Bestellnummer
Ordering Code
LW T6SG-V1AA-JKPL LW T6SG-V2BA-JKPL
white 710 ...1400 900 ...2240
3150 (typ.) 4700 (typ.)
Q65110A8981 Q65110A8982
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Grenzwerte Maximum Ratings Bezeichnung Parameter
Symbol Symbol
Wert Value
Einheit Unit Betriebstemperatur
Operating temperature range
T
op– 40 … + 110 °C
Lagertemperatur
Storage temperature range
T
stg– 40 … + 110 °C
Sperrschichttemperatur Junction temperature
T
j+ 125 °C
Durchlassstrom
Forward current (min.)
( T
A=25°C)
I
FI
F50 5
mA mA
Stoßstrom Surge current
t ≤ 10 μ s, D = 0.005, T
A=25°C
I
FM300 mA
Sperrspannung
3) Seite 18Reverse voltage
3) page 18( T
A=25°C)
V
Rnot designed for reverse operation
V
Leistungsaufnahme Power consumption ( T
A=25°C)
P
tot185 mW
Wärmewiderstand Thermal resistance
Sperrschicht/Umgebung
4) Seite 18Junction/ambient
4) page 18Sperrschicht/Lötpad Junction/solder point
R
th JAR
th JS340 180
K/W
K/W
2009-04-15 4
Kennwerte
Characteristics ( T
A= 25 °C) Bezeichnung Parameter
Symbol Symbol
Wert Value
Einheit Unit Farbkoordinate x nach CIE 1931
5) Seite 18(typ.)
Chromaticity coordinate x acc. to CIE 1931
5) page 18I
F= 20 mA
x 0.33* –
Farbkoordinate y nach CIE 1931
5) Seite 18(typ.) Chromaticity coordinate y acc. to CIE 1931
5) page 18I
F= 20 mA
y 0.33* –
Abstrahlwinkel bei 50 % I
V(Vollwinkel) (typ.) Viewing angle at 50 % I
V2 ϕ 120 Grad
deg.
Durchlassspannung
6) Seite 18(min.) Forward voltage
6) page 18(typ.)
I
F= 20 mA (max.)
V
FV
FV
F2.9 3.2 3.7
V V V
Sperrstrom (typ.)
Reverse current (max.)
V
R= 5 V
I
RI
Rnot designed for reverse operation
μ A μ A
Temperaturkoeffizient von x (typ.) Temperature coefficient of x
I
F= 20 mA; –10°C ≤ T ≤ 100°C
TC
x–0.2 10
-3/K
Temperaturkoeffizient von y (typ.) Temperature coefficient of y
I
F= 20 mA; –10°C ≤ T ≤ 100°C
TC
y–0.2 10
-3/K
Optischer Wirkungsgrad (typ.) Optical efficiency
I
F= 20 mA
η
opt50 lm/W
* Einzelgruppen siehe Seite 5 Individual groups on page 5
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Farbortgruppen
5) Seite 17Chromaticity Coordinate Groups
5) page 17-
Group Cx Cy Group Cx Cy
JK 0,296 0,259 NK 0,3288 0,3081
0,291 0,268 0,3288 0,3282
0,3005 0,2825 0,3386 0,3426
0,3045 0,2715 0,3386 0,3235
JL 0,291 0,268 NL 0,3288 0,3282
0,285 0,279 0,3288 0,3453
0,296 0,2955 0,3386 0,3591
0,3005 0,2825 0,3386 0,3426
KK 0,3045 0,2715 OK 0,3386 0,3235
0,3005 0,2825 0,3386 0,3426
0,31 0,297 0,3484 0,3571
0,313 0,284 0,3484 0,3388
KL 0,3005 0,2825 OL 0,3386 0,3426
0,296 0,2955 0,3386 0,3591
0,307 0,312 0,3484 0,373
0,31 0,297 0,3484 0,3571
OHL04145 520 530
540 550
560 570
580 590
600 610
620 630
00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
510
500
490
450
Cx Cy
Cy
Cx E
480 460 470
0.21
+
0.25 0.27 0.29 0.31 0.33 0.35 0.37
0.23 0.25 0.27 0.29 0.31 0.33 0.35 0.37 0.39 0.41
0.19
JL JK
KL KK
LL LK
ML MK
NL
NK OL OK
PL PK
2009-04-15 6
LK 0,31 0,297 PK 0,3484 0,3388
0,3197 0,3131 0,3484 0,3571
0,3205 0,2956 0,3582 0,3715
0,313 0,284 0,3582 0,3542
LL 0,307 0,312 PL 0,3484 0,3571
0,3189 0,3302 0,3484 0,373
0,3197 0,3131 0,3582 0,3792
0,31 0,297 0,3582 0,3715
MK 0,3197 0,3131
0,3288 0,3282
0,3288 0,3081
0,3205 0,2956
ML 0,3189 0,3302
0,3288 0,3452
0,3288 0,3282
0,3197 0,3131
Group Cx Cy Group Cx Cy
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Helligkeits-Gruppierungsschema Brightness Groups
Helligkeitsgruppe Brightness Group
Lichtstärke
1) Seite 18Luminous Intensity
1) page 18I
V(mcd)
Lichtstrom
2) Seite 18Luminous Flux
2) page 18Φ
V(mlm) V1
V2 AA AB BA
710 ... 900 900 ... 1120 1120 ... 1400 1400 ... 1800 1800 ... 2240
2400 (typ.) 3000 (typ.) 3700 (typ.) 4800 (typ.) 6060 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe, die aus nur 3 bzw. 4 Helligkeitsgruppen besteht.
Einzelne Helligkeitsgruppen können nicht bestellt werden.
Note: The standard shipping format for serial types includes a familiy group of 3 or 4 individual brightness groups.
Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett Group Name on Label
Beispiel: V2-JL Example: V2-JL Helligkeitsgruppe Brightness Group
Farbortgruppe
Chromaticity Coordinate Group
V2 JL
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
Note: No packing unit / tape ever contains more than one group for each selection.
2009-04-15 8
Relative spektrale Emission
2) Seite 18Relative Spectral Emission
2) page 18V( λ ) = spektrale Augenempfindlichkeit / Standard eye response curve I
rel= f ( λ ); T
A= 25 °C; I
F= 20 mA
Abstrahlcharakteristik
2) Seite 18Radiation Characteristic
2) page 18I
rel= f ( ϕ ); T
A= 25 °C
0400λ
OHL01461
I
20 40 60 80
% 100
rel
nm Vλ
450 500 550 600 650 700 750
0 0.2 0.4 1.0
0.8
0.6 ϕ
1.0 0.8 0.6 0.4
0˚
10˚
20˚
40˚ 30˚ OHL01660
50˚
60˚
70˚
80˚
90˚
100˚
0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Durchlassstrom
2) Seite 18Forward Current
2) page 18I
F= f ( V
F); T
A= 25 °C
Relative Farbortverschiebung
2) Seite 18Relative Chromaticity Coordinate Shift
2) page 18x, y = f ( I
F); T
A= 25 °C
Relative Lichtstärke
2) 7) Seite 18Relative Luminous Intensity
2) 7) page 18I
V/ I
V(20 mA) = f ( I
F); T
A= 25 °C
2.5 101
102
5
OHL02359
100
3 3.5 4 4.5 V 5
5 mA
VF IF
-0.020 0
IF
OHL02469
mA
20 40 60 80 100
Cx
Cy
-0.015 -0.010 -0.005 0 0.005 0.015 Δ ΔCx, Cy
V (20 mA)
I IV
IF
100 101 mA 102
10-1 100
101
5 5
OHL02386
2009-04-15 10
Relative Vorwärtsspannung
2) Seite 18Relative Forward Voltage
2) page 18ΔV
F= V
F- V
F(25 °C) = f ( T
j); I
F= 20 mA
Relative Lichtstärke
2) Seite 18Relative Luminous Intensity
2) page 18I
V/ I
V(25 °C) = f ( T
j); I
F= 20 mA
-0.3-60 -0.2 -0.1 0
-40 -20 0 20 0.1
0.2 0.3 0.4
˚C 60 40
Tj 100
OHL02397
V VF
Δ
0-60
-40 -20 0 20
V (25 ˚C)
I IV
˚C 60 40
Tj 100
OHL02725
0.2 0.4 0.6 0.8 1.0 1.4
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Maximal zulässiger Durchlassstrom Max. Permissible Forward Current I
F= f ( T )
Zulässige Impulsbelastbarkeit I
F= f ( t
p) Permissible Pulse Handling Capability Duty cycle D = parameter, T
A= 25 °C
Zulässige Impulsbelastbarkeit I
F= f ( t
p) Permissible Pulse Handling Capability Duty cycle D = parameter, T
A= 85 °C
OHL01354
00 IFmA
˚C T
20 40 60 80 100 120
temp. ambient temp. solder point T
TS
A
TA TS 60
50
30
10 20 40
0 0.05 0.10 0.15
-5
0.20 0.25 IF
0.35
A tP
D=T
t
p s0.2 0.5 0.05
1 0.1
OHL01581
0.02 0.005 0.01 D=
T tP
IF
10-4 10-3 10-2 10-1 100 101 102 10
Angestrebte mittlere Lebensdauer
2) Seite 18für mittlere Helligkeitsgruppe Target median Lifetime
2) page 18for median Brightness Group Bedingungen
Conditions
mittlere Lebensdauer median Lifetime
Einheit Unit
IF = 25 mA TA = 25°C
5
0’000 Betriebsstunden operating hours IF = 25 mATA = 85°C
10
’000 Betriebsstunden operating hours0 0.05 0.10 0.15
-5
0.20 0.25 IF
0.35
A tP
D=T
t
ps 0.2
0.5 0.05
1 0.1
OHL01582
0.02 0.005 0.01 D=
T tP
IF
10-4 10-3 10-2 10-1 100 101 102 10
2009-04-15 12
Maßzeichnung
8) Seite 18Package Outlines
8) page 18Kathodenkennung: abgeschrägte Ecke
Cathode mark: bevelled edge
Gewicht / Approx. weight: 35 mg
Gurtung / Polarität und Lage
8) Seite 18Verpackungseinheit 2000/Rolle, ø180 mm oder 8000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation
8) page 18Packing unit 2000/reel, ø180 mm or 8000/reel, ø330 mm
Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet Note: Package not suitable for ultra sonic cleaning
OHAY3602
3.6 (0.142) 8 (0.315)
3.5 (0.138) 1.75 (0.069) 4 (0.157)
1.5 (0.059)
2.9 (0.114)
4 (0.157)
2 (0.079) Cathode/Collector Marking
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Empfohlenes Lötpaddesign
8) 9) Seite 18Reflow Löten Recommended Solder Pad
8) 9) page 18Reflow Soldering
Empfohlenes Lötpaddesign verwendbar für TOPLED und Power TOPLED Reflow Löten
8) Seite 18Recommended Solder Pad useable for TOPLED and Power TOPLED Reflow Soldering
8) page 18OHLPY970
4.5 (0.177)
2.6 (0.102)
1.5 (0.059)
Cu-area > 16 mm Cu-Fläche > 16 mm
2 2
Solder resist Lötstopplack
4.5 (0.177)
1.5 (0.059)
2.6 (0.102)
Padgeometrie für
improved heat dissipation verbesserte Wärmeableitung Paddesign for
OHLPY440
Padgeometrie für verbesserte Wärmeableitung improved heat dissipation Paddesign for
Lötstoplack Solder resist 0.8 (0.031)
3.7 (0.146) 1.1 (0.043)
2.3 (0.091)
3.3 (0.130)
1.5 (0.059) 11.1 (0.437)
Cu Fläche / 16 mm per pad2 Cu-area
_<
3.3 (0.130)
Kathode/
Cathode Anode
Fläche darf elektrisch nicht beschaltet werden.
Do not use this area for electrical contact.
0.7 (0.028)
Fläche darf elektrisch nicht beschaltet werden.
Do not use this area for electrical contact.
2009-04-15 14
Lötbedingungen Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2 Reflow Lötprofil für bleifreies Löten (nach J-STD-020B)
Reflow Soldering Profile for lead free soldering (acc. to J-STD-020B)
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
OHLA0687
0 0 T
t
˚C
s 120 s max
50 100 150 200 250 300
Ramp Up
100 s max
50 100 150 200 250 300
Ramp Down 6 K/s (max)
3 K/s (max) 25 ˚C
30 s max
260 ˚C+0 ˚C-5 ˚C 245 ˚C±5 ˚C 240 ˚C
255 ˚C 217 ˚C
Maximum Solder Profile Recommended Solder Profile
235 ˚C-0 ˚C+5 ˚C Minimum Solder Profile
10 s min
OHLY0598
0 0
50 100 150 200 250
50 100 150 200 250 300
T
t C
s 235 C
10 s
C ... 260
1. Welle 1. wave
2. Welle 2. wave
5 K/s 2 K/s
ca 200 K/s C... 130 C
100
2 K/s Zwangskühlung forced cooling
Normalkurve standard curve Grenzkurven limit curves
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL)
Gurtverpackung Tape and Reel
Tape dimensions in mm (inch)
W P0 P1 P2 D0 E F
4 ± 0.1
(0.157 ± 0.004) 4 ± 0.1
(0.157 ± 0.004) 2 ± 0.05
(0.079 ± 0.002) 1.5 + 0.1
(0.059 + 0.004) 1.75 ± 0.1
(0.069 ± 0.004) 3.5 ± 0.05 (0.138 ± 0.002) Reel dimensions in mm (inch)
A W Nmin W1 W2 max
180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567)
Sample
(G) GROUP:X - X - X OHA12043Lot Number
(1T) LOT NO: (9D) D/C: Date Code
(X) PROD NO: Product Code (6P) BATCH NO: Batch Number
Lx xxxx Product Name RoHS Compliant
Bin1: Bin Information Color 1 Bin2:
Bin3:
ML 2
Temp ST 260 C RT
Additional TEXT
R077 DEMY
PACKVAR: Packing Type
Product Quantity per Reel (Q)QTY:
Semiconductors OSRAM Opto
Wavelength Group Forward Voltage Group
Brightness Group
Bar Code Bar Code
Bar Code
D0
P2
P0
P1
WFE
Direction of unreeling
N
W1
W2
A
OHAY0324
Label
Gurtvorlauf:
Leader:
Trailer:
Gurtende:
13.0
Direction of unreeling
±0.25
160 mm 160 mm 400 mm 400 mm
8 + 0.3 – 0.1
2009-04-15 16
Trockenverpackung und Materialien
Dry Packing Process and Materials
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien Transportation Packing and Materials
OHA00539
OSRAM
Moisture-sensitive label or print Barcode label
Desiccant
Humidity indicator Barcode label
OSRAM
Please check the HIC immidiately after bag opening.Avoid metal contact.Discard if circles overrun.
WET Do not eat.
Comparator check dot
parts still adequately dry.
examine units, if necessary examine units, if necessary
5%
15%
10%
bake units
bake unitsIf wet,
change desiccant
If wet,
Humidity Indicator MIL-I-8835
If wet,
Moisture Level 3 Floor time 168 Hours
Moisture Level 6 Floor time 6 Hours a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or reflow, vapor-phase reflow, or equivalent processing (peak package 2. After this bag is opened, devices that will be subjected to infrared 1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a at factory conditions of(if blank, seal date is identical with date code).
a) Mounted within b) Stored at body temp.
3. Devices require baking, before mounting, if:
Bag seal date Moisture Level 1Moisture Level 2Moisture Level 2a 4. If baking is required, b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below If blank, see bar code label
Floor time > 1 YearFloor time 1 YearFloor time 4 Weeks 10% RH.
_<
Moisture Level 4Moisture Level 5
˚C).
OPTO SEMICONDUCTORSMOISTURE SENSITIVEThis bag contains CAUTION Floor time 72 HoursFloor time 48 HoursFloor time 24 Hours
30 ˚C/60% RH.
_<
LEVEL If blank, see bar code label
OHA02044
PACKVAR:
R077 Additional TEXT
P-1+Q-1 Multi TOPLED
Muster
OSRAM OptoSemiconductors (6P) BATCH NO:
(X) PROD NO:
01 (9D) D/C:
11 (1T) LOT NO:
210021998 123GH1234
04 52 (Q)QTY: 2000 0144
(G) GROUP:
260 C RT 240 C R 3 220 C R ML Bin3:
Bin2: Q-1-20 Bin1: P-1-20
LSY T67622a Temp ST
R18 DEMY
PACKVAR:
R077 Additional TEXT
P-1+Q-1 Multi TOPLED
Muster
OSRAM Opto Semiconductors (6P) BATCH NO:
(X) PROD NO:
10 (9D) D/C:
11 (1T) LOT NO:
210021998123GH1234 04 52
(Q)QTY: 2000 0144
(G) GROUP:
260 C RT 240 C R
3
220 C R ML Bin3:
Bin2: Q-1-20 Bin1: P-1-20 LSY T676
22a
Temp ST R18DEMY
OSRAM
Packing Sealing label Barcode label
Moisture Level 3 Floor time 168 Hours
Moisture Level 6 Floor time 6 Hours
a) H umidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or reflow, vapor-phase reflow, or equivalent processing (peak package 2. After this bag is opened, devices that will be subjected to infrared 1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a at factory conditions of(if blank, seal date is identical with date code).
a) Mounted within b) Stored at body temp.
3. Devices require baking, before mounting, if:
Bag seal dateMoisture Level 1Moisture Level 2Moisture Level 2a 4. If baking is required, b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below If blank, see bar code label
Floor time > 1 YearFloor time 1 YearFloor time 4 Weeks 10% RH.
_<
Moisture Level 4Moisture Level 5
˚C).
OPTO SEMICONDUCTORS MOISTURE SENSITIVEThis bag contains
CAUTION Floor tim
e 72 Hours Floor time 48 HoursFloor time 24 Hours 30 ˚C/60% RH.
_<
LEVEL If blank, see bar code label
Barcode label
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 18
may only be used in life-support devices or systems11) page 18
with the express written approval of OSRAM OS.
Revision History: 2009-04-15 Previous Version: 2007-10-19
Page Subjects (changes since last revision) Date of change 1, 13 Jedec Level changed acc. to OS-IN-2006-029 2006-10-16 3, 10 Forward current increased; Max. Permissible Forward Current changed 2007-07-16 3, 10 Surge current increased; Permissible Pulse Handling Capability changed 2007-07-16
2, 6 ordering code added 2007-07-27
9 OS-IN-2007-021 2007-10-19
1, 11 OS-IN-2007-022 2007-10-19
all OS-IN-2009-009 2009-04-15
Patent List Patent No.
US 6 066 861
US 6 277 301
US 6 245 259
US 6 576 930
2009-04-15 18 Fußnoten:
1) Helligkeitswerte werden mit einer
Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt.
2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.B.
aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert.
3) Die LED kann kurzzeitig in Sperrichtung betrieben werden.
4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2 je Pad)
5) Farbortgruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±0,01 ermittelt.
6) Spannungswerte werden mit einer
Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt.
7) Im gestrichelten Bereich der Kennlinien muss mit erhöhten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden
8) Maße werden wie folgt angegeben: mm (inch)
9) Gehäuse für Wellenlöten (TTW) geeignet.
10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt.
11) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist.
Published by
OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com
© All Rights Reserved.
Remarks:
1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of ± 11%.
2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
3) Driving the LED in reverse direction is suitable for short term application.
4) RthJA results from mounting on PC board FR 4 (pad size ≥ 16 mm 2 per pad)
5) Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ±0.01.
6) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V.
7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit.
8) Dimensions are specified as follows: mm (inch)
9) Package suitable for TTW-soldering.
10) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.
11) Life support devices or systems are intended (a) to be implanted in the human body,
or (b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
WELTRON Elektronik GmbH // Tel: 09852 6727-0 // Fax: 09852 6727-67 // E-Mail: info@weltron.de