• Keine Ergebnisse gefunden

eM 7000 SERIES

N/A
N/A
Protected

Academic year: 2022

Aktie "eM 7000 SERIES"

Copied!
2
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

COMPUTER MEMORIES

Incorporated

5 ~" Winchester Disk Drive

eM 7000 FEATURES:

• Unformatted capacity of 30.5

,

38

.2, 53.4 and 85.3 megabytes

• 39 millisecond average access time

• Adaptive servo for enhanced durability

• Closed loop servo positioner

• Whisper quiet positioning system

• Proven Winchester technology

• Identical mounting to standard 514 " floppy drives

• Internal microprocessor

Step~pulse

buffering

• Head velocity profile control

• Optimized temperature compensation

• Automatic head lock

• Head parking zone

• Read/write preamplifier within the head/disk assembly

eM 7000 SERIES

(2)

CM 7000 Series disk drive product information

Computer Memories CM 7000 series of Winchester technology disk drives offers storage capacities of 30.5. 38.2. 53.4 and 85.3 megabytes all with average access time of under 40 msec. Combining proven Winchester technology and design tech- niques. such as the unique adaptive servo system. the OEM is assured of the ulti- mate in quality and reliability.

System integration is simplified because the CM 7000 has the same physical di- mensions and mounting hole locations as a standard 5 V4" floppy disk drive. DC voltage requirements are also the same as a mini-floppy drive thus enabling the use of a single power supply for both types of drives.

The high capacities of the CM 7000 are achieved by the utilization of a closed loop servo positioning system. on-board microprocessor. and manganese-zinc heads. The combination of the swing-arm actuator. associated electronics. and head configuration allow the CM 7000 to

achieve a track density of 1 1 73TPI. while providing virtually silent operation for today's office environment.

Host INTERFACE CM 7000

Drive Select 14 lines)

..

Head Select 13 lines)

..

Step

..

Direction

..

Track 000

..

Daisy Chain II

Seek Complete

..

Index

.-- .--

Write Gate Ready

or Radial Connected

Write Fault

..

..

MMFM Read Data FM Write Data

..

..

Drive Selected

..

Write Disable

..

12 Radial Connection

Only

+ 5v

+ 5v Return

..

13

+ 12v

..

DC Power

+ 12v Return

..

Connector

..

14 Frame

..

Ground Frame

REV 11-85 Printed in U.s.A.

CM 7000 til ;{G

Performance Specifications:

Capacity: CM 7030 CM 7038 CM 7053 CM 7085

Unformatted:

Per Drive 30.54 Mbytes 38.17 Mbytes 53.44 Mbytes 85.33 Mbytes Per Surface 7.63 Mbytes 7.63 Mbytes 7.63 Mbytes 10.67 Mbytes Per Track 10.4 I 6 bytes 10.416 bytes 10.416 bytes 10.416 bytes Formatted:

Per Drive 24.04 Mbytes 30.2 Mbytes 42 Mbytes 67.1 Mbytes Per Surface 6.01 Mbytes 6.01 Mbytes 6.01 Mbytes 8.39 Mbytes Per Track 8.192 bytes 8.192 bytes 8.192 bytes 8.192 bytes Per Seclor(32seclors) 256 bytes 256 bytes 256 bytes 256 bytes

Density:

Recording Density 9275 bpi 9275 bpi 9275 bpi 9275 bpi Track Density 902 tpi 902 tpi 902 tpi 1173 tpi

Cylinders 733 733 733 1024

Recording Surfaces 4 5 7 8

Tracks 2932 3665 5131 8192

RlW Heads 4 7 8

Disks 3 3 4 5

Dedicated Servo Head

Functional Specifications:

Rotational Speed 3600 rpm 3600 rpm 3600 rpm 3600 rpm

Transfer Rate 5Mbits/sec 5Mbits/sec 5 Mbits/sec 5 Mbits/sec Access Time (includes seWe time)

Track to Track 9 msec 9 msec 9 msec 9 msec

Average 39 msec 39 msec 39 msec 39 msec

Maximum 75 msec 75 msec 75 msec 75 msec

Average Latency 8.3 msec 8.3 msec 8.3 msec 8.3 msec

Physical Specifications:

Environmental Limits

Ambient Temperature 50°F to 122 of (10°C to 50°C) Relative Humidity 8% to 80% non-condensing Temperature Variation 18°F (1C) hour

Altitude 10.000 ft. (3050cm)

DC Voltage:

+ 5V ± 5% 0.9A typical. I.OA max

+ 12V ± 5% I A typical. 3A seeking. 3.5A max

Mechanical Dimensions:

Height 3.25 in. (82.6 mm)

Width 5.75 in. (146.1 mm)

Depth 8.00 in. (203.2 mm)

Weight 5 Ibs. (2.3 kg)

Reliability Specifications:

MTBF: I 7.000 POH typical usage

PM: Not required

MTTR: less than 0.5 hour

Error Rales:

So~ Read Errors: I per 10'0 bits read Hard Read Errors: I per 10" bits read Seek Errors: I per I 06 seeks

Interface ST/506

Computer Memories reserves the right to change specifications without notice.

Post Office Box 2740

9216 Eton Avenue. Chatsworth. California 9 13 I I Telephone (818) 709-6445 TWX: 910494-4834

Referenzen

ÄHNLICHE DOKUMENTE

When a disk drive is received, its proper function must be verified. The following list of procedures provides a means of accomplishing this. 1) Verify the front bezel

Subjecting the drive to a one-g force (one gravity) will be amplified and transmitted to the heads, impacting them onto the platter with a 100-g force. This necessitates very

Any 7000 Series terminal can be configured as a Terminal Development System (TDS), a turnkey program develop- ment package which includes a 7000 Series keyboard/display,

This signal, in conjunction with the TRANSFER ACK signal, controls the handshake protocol for transferring commands and configuration/status information. Except on

The iSBC 215 controller contains a ROM resident I/O transfer program, designed to control data transfers between the controller and Winchester drives as well

To ensu re that OEM's are getting the highest qua lity and most reliab le 5.25 inch Winchester ava ilable, Min iScribe disk drives mu st pass 96 continuo us hours of extensive

The drives' positioning system uses a rugged linear voice coil actuator that eliminates head skew problems common with other positioning mechanisms..

Like all MiniScribe products, the 8051 A undergoes a rigorous testing and burn in process to insure the highest reliability... (.65 kg) Features and specifications