• Keine Ergebnisse gefunden

eM RIES

N/A
N/A
Protected

Academic year: 2022

Aktie "eM RIES"

Copied!
2
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

COMPUTER MEMORIES

Incorporated

5 ~" Winchester Disk Drive

eM 6000 FEATURES:

• Unformatted capacity of 26.6.

40 and 5 3.3 megabytes

39 millisecond average access time

• Closed loop servo positioner

• Proven Winchester technology

• Identical mounting to standard 5 V4" floppy drives

• Interface compatible with readily available controllers

• Internal microprocessor

Step~pulse

buffering

• Head velocity profile control

• Optimized temperature compensation

• Automatic head lock

• All electronics and motors located outside clean area

• Head parking zone

eM RIES

(2)

CM 6000 Series disk drive product information

Computer Memories CM 6000 series of Winchester technology disk drives offers storage capacities of 26.6, 40 and 53 megabytes all with average access time of under 40 msec. By means of a combina- tion of Winchester technology and proven design techniques, the OEM is assured of the ultimate in quality and reliability.

In order to ease system integration, the CM 6000 has the same physical dimen- sions and mounting hole locations as a standard 5 Y4" floppy disk drive. DC voltage requirements are also the same as a mini-floppy drive thus enabling the use of a single power supply for both types of drives.

The high capacities of the CM 6000 are achieved by the utilization of a closed loop servo positioning system, on-board microprocessor, and manganese-zinc heads. The combinations of the swing-arm actuator, associated electronics, and head allow the CM 6000 to achieve a track density of 750TPI.

Host INTERFACE CM 6000

Drive Select 14 lines)

Head Select (3 lines)

Step

Direction

Track 000

<II

<II Seek Complete

Index

<II

Ready

<II

Write Gate

II Daisy Chain

or Radial Connected

Write Fault

<II

MFM Write Data MFM Read Data

<II

Drive Selected

<II

Write Disable

12 Radial Connection

Only

+5v

+ 5v Return

13

+ 12v

DC Power

+ 12v Return

Connector

14

Frame Frame

Ground

REV 5·85 Printed in U.S.A.

CM 6000

Performance Specific::ations:

Capacity: CM 6426 CM 6640 CM 6853

Unformatted:

Per Drive 26.6 Mbytes 40 Mbytes 53.3 Mbytes

Per Surface 6.6 Mbytes 6.6 Mbytes 6.6 Mbytes

Per Track 10.4 Kbytes 10.4 Kbytes 10.4 Kbytes

Formatted:

Per Drive 20.9 Mbytes 31.5 Mbytes 41.9 Mbytes

Per Surface 5.24 Mbytes 5.24 Mbytes 5.24 Mbytes

Per Track 8.2 Kbytes 8.2 Kbytes 8.2 Kbytes

Per Sec/or (32 sec/orsl 256 bytes 256 bytes 256 bytes

Density:

Recording Density 9275 bpi 9275 bpi 9275 bpi

Track Density 750 tpi 750 tpi 750 tpi

Cylinders 640 640 640

Recording Surfaces 4 6 8

Tracks 2560 3840 5120

R/W Heads 4 6 8

Disks 2 3 4

Functional Specifications:

Rotational Speed 3573 rpm 3573 rpm 3573 rpm

Transfer Rate 5 Mbits/sec 5Mbits/sec 5Mbits/sec

Access Time (includes settle timel

Track to Track 9 msec 9 msec 9 msec

Average 39 msec 39 msec 39 msec

Maximum 75 msec 75 msec 75 msec

Average Latency 8.3 msec 8.3 msec 8.3 msec

Physical Specifications:

Environme/ltal Limits

Ambient Temperature 50°F to 122°F (10°C to 500CI Relative Humidity 8% to 80% non-condensing Temperature Variation 1F (10°C) hour

Altitude 10.000 ft (3050cml

DC Voltage:

+ 5V + 5% 0.9A typical. I .OA max

+ 12V + 5% I A typical. 3A seeking. 3. 5A max

Mechanical Dimensions:

Heignt 3.25 in. (82.6 mml

Width 5.75 in. (146.1 mml

Deptn 8.00 in. 1203.2 mml

Weight 5 Ibs. (23 kgl

Reliability Specifications:

MTBF: 17.000 POH typical usage

PM: Not required

MTIR: less than 0.5 hour

Error Rates:

Soft Read Errors: I per 10'0 bits read Hard Read Errors: I per 10" bits read Seek Errors: I per I 06 seeks

Interface ST/506/4 I 2

Computer Memories reserves the right to change specifications without notice.

r;:::a COMPUTER

~~~~~RlES

Post Office Box 2740

9216 Eton Avenue, Chatsworth, California 9131 I Telephone (818) 709-6445 TWX: 910 494-4834

Referenzen

ÄHNLICHE DOKUMENTE

Subjecting the drive to a one-g force (one gravity) will be amplified and transmitted to the heads, impacting them onto the platter with a 100-g force. This necessitates very

• OPI/64 and OPI/16 three-microprocessor configuration - includes a display microprocessor that controls aU display functions; an input/output microprocessor that

After the multipurpose, bus address, and disk address registers have been loaded, the control and status register is loaded to specify the drive number (0-3) and

When Command Data or Configuration/Status Data is transferred, this signal line is used with the Transfer Acknowledge signal as a handshake signal. (4)

The data format on the user space (the length of data block and the number of data blocks) can be specified with the MODE SELECT or MODE SELECT EXTENDED command.. The default number

The S-byte of the disk control field at the end of the operation contains the identifier of the last sector processed unless there is a missing address marker on the disk or

The drives' positioning system uses a rugged linear voice coil actuator that eliminates head skew problems common with other positioning mechanisms..

The M iniScribe IV series of highly reliable 5 1 /4-inch Winchester disk drives offers 10 or 20 megabytes of unformatted storage on one or two platters in an