• Keine Ergebnisse gefunden

Disk Winchester

N/A
N/A
Protected

Academic year: 2022

Aktie "Disk Winchester"

Copied!
2
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

MAY 1983

Computer Memories 19 Megabyte,

5 1 ,4" Winchester

Disk Drive.

eM 5000 features:

• Capacities of 6 .38, 12 .76 and 19.14 megabytes

unformatted

• Lowest cost per megabyte

• 5 megabyte format ..

ted data per platter

• Proven Winchester technology

• Identical mounting to standard 5

1

,4"

floppy drives

• Interface compatible with readily available

controllers

• No .. hysteresis positioning system

• Internal microprocessor

• Step .. pulse buffering

• Head velocity profile control

• Optimized temperature compensation

• High output, high resolu ..

tion heads

• All electronics and motors

located outside clean area

(2)

eM 5000 disk drive, product infor- mation. The Computer Memories series of Winchester technology disk drives offer the highest storage capac- ity currently available in a minifloppy size package. The CM 5000 is avail- able in 6.38, 12.76,and 19.14 Mbyte versions and each version offers the lowest cost/Mbyte in its capacity range. By means of a combination of Winchester technology and proven design techniques, the OEM is assured of the ultimate in quality and

reliability.

In order to ease system integration, the CM 5000 has the same physical

dimensions and mounting hole loca- tions as a standard 51A" floppy disk drive. DC voltage requirements are also the same as a minifloppy drive thus enabling the use of a single power supply for both types of drives.

The high capacities of the CM 5000 are achieved by the utilization of a high- torque, high precision stepper motor, on-board microprocessor, and manganese-zinc heads - unique in such a small device. The combination of the swing-arm actuator, associated electronics, and head allow the

CM 5000 to achieve a track density of 345 TPI and bit density of 9180 BPI.

Host

INTERFACE

CM 5000

Drive Select (4 lines) Head Select (3 lines)

~

Step Direction

~

Track 000 4

4 Seek Complete Index 4

4 Ready

JI Daisy Chain

or Radial Connected

Write Gate

~

Write Fault

MFM Write Data J2

MFM Read Data Radial

4 Drive Selected Connection

Write Disable Only

+5v ~

+5v Return

~

+12v

J3 DC Power +12vReturn

Connector

Frame

~

]4 Frame Ground

Rev. 1. May, 1982

CM 5000 Specifications

Performance SpecifICations:

Capacity CM5206 CM5412 CM5619

Unformatted

Per Drive 6.38 Mbytes 12.76 Mbytes 19.14 Mbytes Per Surface 3.19 Mbytes 3.19 Mbytes 3.19 Mbytes Per Track 10.4 Kbytes 10.4 Kbytes 10.4 Kbytes Formatted

Per Drive 5.0 Mbytes 10.0 Mbytes 15.0 Mbytes Per Surface 2.5 Mbytes 2.5 Mbytes 2.5 Mbytes Per Track 8.2 Kbytes 8.2 Kbytes 8.2 Kbytes

Per Sector 256 bytes 256 bytes 256 bytes

Secwrs/Track 32 32 32

Transfer Rate 5.00 Mbits/sec 5.00 Mbits/sec 5.00 Mbits/sec Access Time

Track w Track 2 msec 2 msec 2 msec

Average 80 msec 80 msec 80msec

Maximum 175 msec 175 msec 175 msec

Setding Time 13 msec 13 msec 13 msec

Average Latency 8.3 msec 8.3 msec 8.3 msec

Functional Specifications:

Rotational Speed 3,600 rpm 3,600 rpm 3,600 rpm Recording Density 9,180 bpi 9,180 bpi 9,180 bpi

Flux Density 9,180 fci 9,180 fci 9,180 fci

Track Density 345 tpi 345 tpi 345 tpi

Cylinders 306 306 306

Tracks 612 1,224 1,836

R/W Heads 2 4 6

Disks 2 3

Physical SpecifICations:

Environmental Limits

----~--~-~~-~---

Ambient Temperature = 50°F to 115°F (l00C to 46°C) Relative Humidity = 8% to 80%

DC Power Requirements

+12 VDC±lO% l.5A typical, 3.5A max +5 VDC ±5% 0.9A typical, l.OA max

Mechanical Dimensions:

Height = 3.25 in. (82.6 mm) Width =5.75 in. (146.1 mm) Depth = 8.00 in. (203 mm) Weight = Sibs. (2.3 Kg)

Heat Dissipation = 78 BTU/hr. typical (22.5 watts)

Reliability Specifications:

MTBF: 8000 POH typical usage PM: Not required

MTTR: 30 minutes Component Life: 5 years Error Rates:

Soft Read Errors: 1 per 1010 bits read Hard Read Errors: 1 per 1012 bits read Seek Errors: 1 per 1()6 seeks

Computer Memories, Inc.

9216 Eton Avenue, Chatsworth, California 91311 Telephone (213) 709-6445 TWX: 910 494-4834

Referenzen

ÄHNLICHE DOKUMENTE

This signal, in conjunction with the TRANSFER ACK signal, controls the handshake protocol for transferring commands and configuration/status information. Except on

The S-byte of the disk control field at the end of the operation contains the identifier of the last sector processed unless there is a missing address marker on the disk or

The iSBC 215 controller contains a ROM resident I/O transfer program, designed to control data transfers between the controller and Winchester drives as well

To ensu re that OEM's are getting the highest qua lity and most reliab le 5.25 inch Winchester ava ilable, Min iScribe disk drives mu st pass 96 continuo us hours of extensive

The drives' positioning system uses a rugged linear voice coil actuator that eliminates head skew problems common with other positioning mechanisms..

Like all MiniScribe products, the 8051 A undergoes a rigorous testing and burn in process to insure the highest reliability... (.65 kg) Features and specifications

The single printed circuit board utilizes surface mount technology to increase reliability and decrease power consumption to a very cool 8 watts.. Defect handling

This design allows for a stationary shaft actuator supporting up to 15 mini- composite data heads, an in-hub spindle motor supporting up to 8 sputtered disks,