• Keine Ergebnisse gefunden

BUILDING SKINS

N/A
N/A
Protected

Academic year: 2022

Aktie "BUILDING SKINS"

Copied!
15
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

3-4 November 2015, Bern, Switzerland

ADVANCED

BUILDING SKINS

Advanced Building Skins

(2)

10th Conference on Advanced Building Skins 3-4 November 2015, Bern, Switzerland

ISBN: ISBN 978-3-98120538-1

Economic Forum Landsberger Str. 155 80687 Munich, Germany

info@economic-forum.eu

DE129771557

© Copyright: EF ECONOMIC FORUM

(3)

CONTENT

A1-1: Benefits of translucent building envelope made of DSC-integrated glassblocks Luisa Pastore, Università degli Studi di Palermo, Italy

A1-2: Glazed photovoltaic-thermal component for building envelope structure Tomas Matuska, Czech Technical University, Prague, Czech Republic

A1-3: Energy, daylight and thermal analysis of a geodesic dome with a photovoltaic envelope Marco Lovati, EURAC Research, Bolzano, Italy

A1-4: Solar-driven form finding - Functionality and aesthetics of a solar integrated building envelope Walter Klasz, University of Innsbruck, Austria

A1-5: Designing energy generating building envelopes Daniel Mateus, University of Lisbon, Portugal

A1-6: The importance of the basic material research for the development of innovative BIPV Michele Pellegrino, CR ENEA Portici, Italy

A1-7: Technical challenges for the cell interconnection in a customized BIPV module Wendelin Sprenger, Fraunhofer Institute for Solar Energy Systems, Freiburg, Germany

A2-1: Photovoltaic technologies used in the prototypes of the Solar Decathlon Europe 2014 Núria Sánchez-Pantoja, University Jaume I, Castelló, Spain

A2-2: The Ekihouse: an energy self-sufficient house based on passive design strategies Rufino Hernéndez, University of the Basque Country, San Sebastian, Spain

A2-3: NexusHaus: prototype for a green alley flat

Petra Liedl, School of Architecture, University of Texas at Austin, USA

A2-4: RhOME for denCity - Inertial mass for lightweight drystone stratigraphy Chiara Tonelli, University of Roma TRE, Rome, Italy

A2-5: A critical review of the Solar Decathlon: origins, evolution, and future Jamie Russell, EPFL, Lausanne, Switzerland

A3-1: Integration of photovoltaics in a load-bearing timber-glass façade Vitalija Rosliakova, Vienna University of Technology, Austria

A3-2: Photovoltaics in architecture: separating facts from fiction Dieter Moor, ertex solartechnik, Austria

(4)

CONTENT

A3-3: The architectural potentials of solar technology in energy-efficient renovation Roland Krippner, Technische Hochschule Nürnberg, Germany

A4-1: A size-flexible, shade robust photovoltaic system for integration in roofs and façades Josco Kester, ECN Solar Energy, Netherlands

A4-2: Symbiosis between solar technologies in the building envelope Chiara Tonelli, Università degli Studi Roma Tre, Rome, Italy

A4-3: Simple models for architecture with BIPVT or BIST

Christoph Maurer, Fraunhofer Institute for Solar Energy Systems, Freiburg, Germany

A4-4: Transformation of a historical coal bunker into a solar power station using multi-colored BIPV Kerstin Müller, baubüro in situ ag, Basel, Switzerland

A4-5: Innovative solar thermal concentrating roof-integrated collector

Mauro Caini, Department of Civil, Environmental and Architectural Engineering -University of Padua

A5-1: Integration of photovoltaics in office and commercial buildings: economical and energy optimization Valérick Cassagne, TOTAL - New Energies, Paris La Défense, France

A5-2: Fostering BIPV in the Mediterranean area Giuseppe Desogus, University of Cagliari, Italy

A5-3: Strategies to increase the deployment of PV in façades Christian Renken, CR Energie Sarl, Collombey, Switzerland

A7-1: Performance analysis of solar air heating systems for the refurbishment of commercial buildings Benoit Sicre, Lucerne University of Applied Sciences and Arts, Switzerland

A7-2: Venetian blinds as a solar thermal collector in a mechanically ventilated transparent façade Alfredo Guardo Zabaleta, Polytechnic University of Catalonia, Barcelona, Spain

A7-3: Integrating solar vacuum tubes in a high rise building façade Walid el Baba, Webco sarl, Beirut, Lebanon

A7-4: Architectural integration of solar collectors made with ceramic materials Jordi Roviras Miñana, Universitat Internacional de Catalunya, Barcelona, Spain

A7-5: Thermal analysis of a flat evacuated glass enclosure for building integrated solar applications Trevor Hyde, Center for Sustainable Technologies, University of Ulster, UK

(5)

CONTENT

B1-1: Impacts of building envelope options on hospital energy performance Heather Burpee, University of Washington, USA

B1-2: Reducing the length of stay in hospitals with daylight optimization Helmut Köster, Köster Tageslichtplanung, Frankfurt, Germany

B1-3: Daylight quality in healthcare design Sahar Diab, University of Jordan, Amman, Jordan

B2-1: A parametrical study for the optimization of daylighting in advanced façades Nelly Moenssens, University of Leuven, Ghent, Belgium

B2-2: Control strategies and user acceptance of innovative daylighting and shading concepts Michaela Reim, Bavarian Center for Applied Energy Research, Germany

B2-3: Building envelope design for enhanced daylight distribution Erika Figueiredo, Universidade Presbiteriana Mackenzie, São Paulo, Brazil B2-4: Light and outside vision at restaurants

Urtza Uriarte, Universitat Politècnica de Catalunya, Barcelona Tech, Spain B2-5: Parans solar lighting system

Rawan Allouzi, Ministry of Public Works and Housing, Amman, Jordan

B3-1: Optimised solar shading control systems for passive houses in cold climates Søren Gedsø, Erichsen & Horgen, Oslo, Norway

B3-2: Measurement method for solar heat gain coefficient of high-performance façades using small solar spectroradiometers

Takefumi Yokota, Nikken Sekkei Ltd, Tokyo, Japan

B3-3: Geometric focalization of sun rays in residential building applications Alexandra Saranti, Technical University of Crete, Polytechneioupolis, Greece

B3-4: Comparing the efficiency of solar shading devices in reducing building cooling needs Olivier Dartevelle, Architecture et Climat, Université Catholique de Louvain, Belgium

B3-5 Modelling of an anidolique daylight system Daich Safa, University of Mohamed Khider, Biskra, Algeria

(6)

CONTENT

B4-1 Holistic Refurbishment

Stefan Oehler, Werner Sobek, Frankfurt, Germany

B4-2: Smart façades for existing, non-residential buildings: An assessment Konstantinos Panopoulos, International Hellenic University, Thermi, Greece B4-3: Energy performance of existent external walls in Istanbul Özlem Karagöz, Istanbul Technical University, Turkey

B4-4: Timber passive solar façade – an adapative façade for the refurbishment of existing buildings Antonio Spinelli, Politecnico di Torino, Italy

B4-5: Integrating structural glass systems in historic building facades Meltem Nevzat, International University, Haspolat, Cyprus

B5-1: Performance based retrofitting of façades for nearly zero-energy buildings Sheikh Zuhaib, National University of Ireland, Galway, Ireland

B5-2: Towards user-oriented plug & play façades - Upgrading the energy performance of row houses Mieke Oostra, Hanze University of Applied Sciences, Groningen, Netherlands

B5-3: The use of BIM in the restoration of the Teatro Lirico Lidia Pinti, Politecnico di Milano, Italy

B5-4: End effectors for an automated and robotic façade component

Kepa Iturralde, Chair for Building Realization and Robotics, TU Munich, Germany B5-5: Retrofitting building envelopes in warm regions

Carolina Caballero Roig, Universitat Jaume I, Castellón de la Plana, Spain

B6-1: Resilience of Swiss offices to climate change: A comparison of four buildings with different façade typologies

Dominic Jurt, Lucerne University of Applied Science and Arts, Switzerland B6-2: Building envelope: assessment and certification of its performance Valentina Puglisi, Politecnico di Milano, Italy

B6-3: Comparing the eneregy efficiency of a timber curtain wall with an aluminium system Nebojša Buljan, Permasteelisa Group, Rijeka, Croatia

(7)

CONTENT

B6-4: Optimal characteristics and dimensions of glazing components in building skins David Kammer, Bern University of Applied Sciences, Switzerland

B6-5: A new approach for advanced building skin design and testing: the BUILDING FUTURE lab Corrado Trombetta, Università Mediterranea di Reggio Calabria, Italy

B6-6: Design choices and thermal simulations of a test cell facility - Performance tests and building envelope components

Giulio Cattarin, Politecnico di Milano, Italy

B6-7: Condensation within building skins: temperature-gradient calculation, modelling and finite-elements simulation

Amir Hassan, WSP, Alberta, Canada

B6-8: Simulations with reflective and absorbent materials for a better acoustic quality of the building skin Stefania Masseroni, Politecnico di Milano, Italy

B6-9: The effects of pavement albedo changes on conditioning energy use in buildings as a function of building skin properties

Pablo Rosado, Heat Island Group, Lawrence Berkeley National Laboratory, USA

B7-1: Thermal bridging assessment and its impact on the building energy performance Katerina Tsikaloudaki, Aristotle University of Thessaloniki, Greece

B7-2: Impact of infiltrations in energy demand of a dwelling: Sensitivity to infiltrations for Mediterranean climate

Silvia Guillén-Lambea, University of Zaragoza, Spain

B7-3: Lessons of bioclimatic passive design in the Herbert Jacobs II house by Frank Lloyd Wright Juan Sebastián Rivera Soriano, Universidad de la Salle, Bogotá, Colombia

B7-4: Validation of the PHPP program calculations in Mediterranean climates Beatriz Rodríguez Soria, Centro Universitario de la Defensa, Zaragoza, Spain B7-5: Commissioning and optimization of a new office building

Niels Radisch, Ramboll, Copenhagen, Denmark

C1-1: Conserving energy with biodiverse building skins Bruce Dvorak, Texas A&M University, USA

(8)

CONTENT

C1-2: Passivhaus envelope with modular straw panels Bjørn Kierulf, Createrra, Senec, Slovakia

C1-3: Environmental implications of cork as thermal insulation in façade retrofits Jorge Sierra-Pérez, Universitat Autònoma de Barcelona, Spain

C1-4: The potential application of agro-based polymers in building façades Mahjoub Elnimeiri, Illinois Institute of Technology, Chicago, USA

C2-1: Thermal performance of lightweight walls with phase change materials (PCM) Efraín Moreles, National Autonomous University of Mexico, Morelos, México

C2-2: Difficulties of heat transfer from PCM type board to ambient room Martin Zálešák, Tomas Bata University, Zlin, Czech Republic

C2-3: Simulation of the thermal performance of translucent phase change materials and whole-building energy implications

Philipp Kräuchi, Lucerne University of Applied Science and Arts, Switzerland

C2-4: Application of PCM panels of different solidus temperatures on inner wall surfaces to reduce seasonal heating/cooling loads

Craig Farnham, College of Human Life Science, Osaka City University, Japan C2-5: Ultramarine blue pigment with thermal storage for buildings María Isabel Arriortua, Universidad del País Vasco, Bizkaia, Spain C3-1: Application of phase-change materials in buildings Rami Alsayed, Saudi Aramco, Saudi Arabia

C3-2: Year-round comfortable environment in a multi-storey building by melting and solidification of PCM Vadim Dubovsky, Ben-Gurion University of the Negev, Beer-Sheva, Israel

C3-3: Optimization of PCMs installed on walls and ceilings for light-weight residential buildings Paulo Tabares, University of Denver, Colorado, USA

C3-4: Aerogel insulation enhanced with phase change material for energy conservation in structures George Gould, Aspen Aerogels, USA

C3-5: Comparison of PCM-active thermal storage systems integrated in building enclosures Vasken Dermardiros, Concordia University, Montréal, Canada

(9)

CONTENT

C4-1: Light-weight panel for buildings: an integrated optimization process Fabio Manzone, Politecnico di Torino, Italy

C4-2: Comparing the energy saving of timber frame cladding with PUR foam insulation Zdeněk Fránek, Technical University Liberec, Czech Republic

C4-3: A new stucco coating based on pearlescent pigments for improving wall thermal insulation Alessandro Premier, Iuav University of Venice, Italy

C4-4: Soil as skin: ancient rammed earth and passive solar technologies in the modern age Martin Knap, Atlin, British Columbia, Canada

C5-1: Performance assessment of advanced materials in architectural envelopes Roberto Garay Martinez, Tecnalia, Spain

C5-2: Investigations on vacuum insulation panels based on medium sized powders Roland Caps, VA-q-Tec, Germany

C5-3: Making thermal insulation adaptive

Nikolaus Nestle, BASF SE Advanced Materials and Systems, Ludwigshafen, Germany C5-4: Aerogel insulation in refurbishment

Michal Ganobjak, Slovak University of Technology, Bratislava, Slovakia C6-1: VIP in building applications

Steffen Knoll, Porextherm GmbH, Germany C6-2: Evaluation of architectural VIP in Japan Atsushi IWAMAE, Kindai University, Osaka, Japan

C6-3: Application of Vacuum Insulation Panels in Canada’s North Doug MacLean, Energy Solutions Centre, Whitehorse, Canada C7-1: Application of aerogel technology in curtain wall façades David Appelfeld, Dow Corning Belgium

D1-1: Unitised façade assemblies for high rise residential buildings Ron Fitch, Trimo UK Ltd.

D1-2: The dynamic response of the semi-closed cavity skin to changing of load condition Fumihiko Chiba, University of Technology, Toyohashi, Japan

(10)

CONTENT

D1-3: Technological and behavioral aspects of perforated building envelopes Bader Alatawneh, Università degli Studi di Palermo, Italy

D1-4: Innovative block on housing in the Mediterranean climate Calogero Montalbano, Politecnico di Bari, Italy

D1-5: Acceptance by durability: Quality assurance and insurance favour the use of innovative façades Iris M. Reuther, Technische Universität Graz, Austria

D1-6: Including traditional architectural elements to optimize building skin Joan Ramon Dacosta Díaz, Generalitat de Catalunya, Barcelona, Spain

D1-7: Optimum solutions to satisfy preference façades and energy consumption of an office building Ali Alajmi, College of Technological Studies, Mishref, Kuwait

D1-8: Evolution of building envelopes through creating living characteristics Elaheh Najafi, Iran University of Science and Technology, Iran

D2-1: Shrinkage and temperature effects in glass-concrete composite panels Pietro Crespi, Politecnico di Milano, Italy

D2-2: Light transmitting concrete Andreas Roye, LUCEM GmbH, Germany

D2-3: Improvement of indoor air quality using photocatalytic cement-based mortars Chiara Giosuè, Università Politecnica delle Marche, Ancona, Italy

D2-4: Functional lightweight and air purifying concrete Jos Brouwers, Eindhoven University of Technology, Netherlands D2-5: Infra-lightweight concrete in multi-story residential buildings Claudia Lösch, Technische Universität Berlin, Germany

D2-5: Experimental investigation of thermal mass in hemp-lime concrete walls Oliver Kinnane, Queen’s University, Belfast, United Kingdom

D3-1: Mechanical properties of wood-cement compounds Daia Zwicky, University of Applied Sciences, Fribourg, Switzerland D3-2: Wood-cement compound-based load-bearing wall elements Niccolò Macchi, University of Applied Sciences, Fribourg, Switzerland

(11)

CONTENT

D3-3: Thermal and acoustic insulation properties of Wood-cement compounds Alireza Fadai, Vienna University of Technology, Austria

D3-4: Numerical simulations of the overall building-physical performance of wood-cement compound-based building skins

Joachim Nathanael Nackler, Vienna University of Technology, Austria D3-5: Combustibility of wood-cement compounds

Daia Zwicky, University of Applied Sciences, Fribourg, Switzerland

D3-6: Economic and ecological performance of wood-cement compound-based wall elements Wolfgang Winter, Vienna University of Technology, Austria

D4-1: Energy self-sufficient Otaniemi campus

Satu Kankaala, Aalto University Properties Ltd., Espoo, Finland

D4-2: Zero-Energy Urban Quarters in moderate climates: Developing guidelines at the building and urban planning levels

Udo Dietrich and Lena Knoop, HafenCity University Hamburg, Germany

D5-1: An approach for the sustainable urban development: starting from the building Antonella Calderazzi, Politecnico di Bari, Italy

D5-2: Zoning ordinances as tools for energy self-sufficiency Anders Nereim, School of the Art Institute of Chicago, USA

D5-3: APEC Low-Carbon Model Town Project: Progress and Prospect Kazutomo Irie, Asia Pacific Energy Research Centre, Tokyo, Japan

D6-1: The efficacy of policy instruments to reduce the energy use of privately owned dwellings Bram Entrop, University of Twente, Enschede, Netherlands

D6-2: Polices to reduce market barriers for building performance Irene Boles, Christchurch Polytechnic Institute of Technology, New Zealand

D6-3: Energy performance of buildings in Santiago, Chile: results of unregulated and high solar radiation context

Claudio Vásquez Zaldívar, Universidad Católica de Chile, Santiago, Chile D6-4: The user’s benefit as financial reference for building refurbishments Carmen Alonso, Spanish National Research Council, Madrid, Spain

(12)

CONTENT

D6-5: The influence of end user perception on the economic feasibility of sustainable building skin renovations

Bob Bogers, University of Technology, Delft, Netherlands

D7-1: Optimization through life cycle costs analysis - Social housing retrofitting in Italy Angela Poletti, Politecnico di Milano, Italy

D7-2: Retrofitting for social housing: A sustainable solution towards zero energy buildings Gianpiero Evola, University of Catania, Italy

D7-3: A cost approach to evaluate sustainable building design for a social housing complex Antonio Talarico, Politecnico di Torino, Italy

D7-4: Industrialised renovation strategies and prefabrication – Cost optimisation and added values in focus Sonja Geier, Lucerne University of Applied Science and Arts, Switzerland

E1-1: Discomfort glare with complex fenestration systems and the impact on energy use when using daylighting control

Sabine Hoffmann, University of Kaiserslautern, Germany

E1-2: Structural sealant glazing: reinventing the wooden window Marc Donzé, Bern University of Applied Sciences, Switzerland E1-3: Thermal properties of door and window access systems Wolfgang Rädle, Bern University of Applied Sciences, Switzerland

E1-4: New material for an ecological solution for wooden window frame enlargements Urs Uehlinger, Bern University of Applied Sciences, Switzerland

E1-5: Modelling complex fenestration systems in TRNSYS – a comparison between a simplified and a detailed thermal model

Giuseppe De Michele, EURAC Research, Bolzano, Italy

E1-6: Building Elements Smart Technology (BEST) - Analysis of thermal behaviour of windows in old buildings

Pierfrancesco Prosperini, University of Camerino, Ascoli Piceno, Italy

E1-7: Measuring condensation water in the interspace of coupled windows Max Bauer, Sapa Building Systems GmbH, Ulm, Germany

(13)

CONTENT

E2-1: Energy Frames - A new technology for intelligent glazed façades Frederik V. Winther, Rambøll, Copenhagen, Denmark

E2-2: Analysis of potential biomimetic applications of skin and shell analogies on the building envelope Leopoldo Saavedra, Technical University Munich, Germany

E2-3: Adaptive architectural envelopes for temperature, humidity and CO2 control Marlén López, University of Oviedo, Gijon, Spain

E2-4: Lightweight modular structure for an energy-efficient adaptive building envelope Maria Eftychi, University of Cyprus, Nicosia, Cyprus

E3-1: Adaptive façades Network

Andreas Luible, Lucerne University of Applied Science and Arts, Switzerland

E3-2: Monitoring energy and comfort performance of transparent adaptive façades Valentina Serra, Politecnico di Torino, Italy

E3-3: Experimental facilities for adaptive façades characterization

Francesco Goia, Norwegian University of Science and Technology, Trondheim, Norway

E3-4: Adaptive façade systems – A review of performance requirements, design approaches, use cases and market needs

Christian Struck, Saxion University of Applied Sciences, Enschede, Netherlands E3-5: Adaptive façades System Assessment

Shady Attia, University of Liège, Belgium

E3-6: Design for façade adaptability – Towards a unified and systematic characterization Roel Loonen, Eindhoven University of Technology, Netherlands

E4-1: Prototyping of composite structural envelopes through CNC and robotic fabrication Chris Knapp, Bond University, Queensland, Australia

E4-2: Advanced ceramic environmental screens

Rosa Urbano Gutierrez, University of Liverpool and Amanda Wanner, Leeds Beckett University, UK E4-3: Metal mesh shading devices optimization by parametric approach design

Andrea Zani, Politecnico di Milano, Italy

(14)

CONTENT

E4-4: Advanced BIM tools for building planning, collaboration and analysis Kai Oberste-Ufer, DORMA, Germany

E5-1: Exchanges between physical computing and performative parametric models Mate Thitisawat, Florida Atlantic University, Fort Lauderdale, USA

E5-2: Application of interactive 3D visualization and computation for energy appraisal: enhancing BIM practices in small companies

Vladeta Stojanovic, Abertray University, Dundee, United Kingdom

E5-3: Lighting performance simulation and adaptive control of an advanced building skin based on human behavior inputs

Kristis Alexandrou, University of Cyprus, Nicosia, Cyprus E6-1: Performance analyses of tensile membrane façades Eve S. Lin, Tensile Evolution, Irvine, CA, USA

E6-2: A lightweight plug-in adaptive envelope to reduce the energy consumption of existing buildings Styliana Gregoriou, University of Cyprus, Nicosia, Cyprus

E6-3: Coated textiles: smart wraps for old and new buildings Katja Bernert, Mehler Texnologies GmbH, Germany

E6-4: Performace analyses of the Ducati superbike pavilion Mariangela De Vita, Università degli Studi dell’Aquila, Italy

E7-1: Climate-dependent wind-driven passive ventilative cooling potential in Central and Southern Europe Mario Grosso, Polytechnic University of Turin, Italy

E7-2: Natural ventilation in existing buildings by hybrid draft guard Jan de Wit, Saxion University of Applied Sciences, Enschede, Netherlands E7-3: Advanced control of natural ventilation with solar and noise protection Shuqing Cui, Mines Paris Tech, France

E7-4: Performance of the traditional building envelope in Malta Antonio Mollicone, University of Malta, Iklin, Malta

F2-1: From „Building Integrated“ to „Building oriented“ Photovoltaics

Urs Muntwyler, Head, Laboratory for Photovoltaics, Berner Fachhochschule, Switzerland

(15)

CONTENT

F2-2: Hybrid, stromproduzierend und transluzent: Ein wegweisendes Fassadensystem für die Mobiliar AG BernDaniel Meyer, GWJARCHITEKTUR AG, Bern, Schweiz

F3-1: Concepts for mechanically biased membrane and film constructions in conjunction with standardized façade systems

Marcel Ebert, Faculty of Architecture and Urban Studies, Bauhaus University Weimar, Germany F4-1: Sun protection and comfort - comfort by optimizing profit by building simulation

Eva-Maria Pape, Director, Institute for Energy-Efficient Architecture, University of Applied Sciences Cologne, Germany

F4-2 Optimization of building design with simulations of building energy consumption Emil Grüniger, Soltherm AG, Altendorf, Switzerland

F4-3: Simulation of captive use for building integrated photovoltaics (BIPV) Samuel Summermatter, Head Engineering Department, BE Netz AG, Switzerland

F5-1: Polypyrrole: Additional functions for facades made of biomaterials

Michael Sailer, Unit Innovative Technology in Construction, Saxion University of Applied Science, Enschede, The Netherlands

F5-2: Biologically-degradable building envelopes of the future

Daniel Friedrich, Engineering and Architecture, University of Lucerne, Switzerland F5-3: Ecological and energetic aspects of facade elements made of formed TRC Kevin Pidun, Department of Plastic, RWTH Aachen, Germany

F5-4: Phase change materials for the climate control of a residential building

Nadège Vetterli, for International Building, Engineering and Architecture, University of Lucerne, Switzerland F5-5: Building Information Modeling in the LCA of building production

Georg Reitschmidt, Department of Construction Informatics and Sustainable Building, Technical University of Central Hesse, Giessen, Germany

F5-6: Effect of vapor-permeable and reflective materials on radiation moisture, heat transfer and durability of facades

Heinrich Thielmann, HTC, Grenoble, France

F4-4: Einfluss der Wärmespeicherfähigkeit auf die energetische Flexibilität von Gebäuden Monika Hall, Fachhochschule Nordwestschweiz, Institut Energie am Bau

Referenzen

ÄHNLICHE DOKUMENTE

Von dieser Basis aus- gehend, hat es sich diese Arbeit zum Ziel gemacht der Komax durch ein modula- res Konzept eine Stossrichtung für ein langfristig erfolgreiches E-Learning

Considering the transitory aspects of Fluxus forms not destined for preservation, and looking through a multidisciplinary lens of conservation, art history, performance

This section contains a presentation of the literature reviews in the field of process mining and simulation. The first follow up on the current state in the research field, van

Establishment of flexible work arrangements (FWAs) as organizational development:.. How do organizations have to change in order to support

This paper focuses its attention on the centralconcep- tual issues of the field: the scientific nature of applied systems analysis, the search for standards of quality for

Please note that this document is a translation of the German “Antrag zur Master Thesis im Studiengang NGO, Fachbereich Wirtschaft Rheinbach”. Only the German source text is

Ausgehend von diesen Erfolgen, insbesondere durch die A320 und ihre Varianten im Kurz- und Mittelstreckenbereich, will Airbus nun mit Weiterentwicklungen der A340 und der A3XX auch

Auf dieser Basis soll dazu ein Kri- terienkatalog entworfen und realisiert werden, mit dessen Hilfe die verschiedenen Konzepte hinsichtlich ihrer Eignung für den Einsatz