IS AT AN ANNUAL CHARGE OF $215.
HARDWARE TO BE SUPPLIED IS' (1) 0425-07.
(1) C4316-00. (1) F3860-04 AND (1) C3381-00
OR DEPENDING ON AVAILABILITY' ( l ) 0425-00. (1) C3863-03.
AND (1) F3860-04.
ALSO REFERENCE DRAWING NO. 3628353. NOTE' CSU EQUIPMENT.
T0425-094 07 UTS4000 2874143 03-82 HDQ PRINTER 160/40 CPS SAME AS 0425-96 EXCEPT 220/240V. 50HZ. AND REQUIRES POWER CORD SELECTION C3381-XX. HARDWARE TO BE SUPPLIED IS; (1) 0425-08, (1) C4316-01 AND (11 F3860-05.
DR DEPENDING ON AVAILABILITY' (11 0425-05.
0) C3865-09. (1) F3860-05.
ALSO REFERENCE DRAWING NO. 3628353. NOTE' CSU EQUIPI'IENT.
T0425-095 07 UTS4000 2874143 03-82 oPQ PRINTER 160 CPS SAME AS 0425-97 EXCEPT 220/240V. 50HZ AND REQUIRES POWER CORD SELECTION C3381-XX. HARDWARE TO BE SUPPLIED IS' (11 0425-07. (11 C4316-01. AND (11 F3860-05.
DR DEPENDING ON AVAILABILITY' ( l ) 0425-04.
(10425-095 CONTINUED ON NEXT PAGE) 01-10-85
TYPE NUi'lBERS IN NUi'lERICAL SEQUENCE-SECTION 11 TYPE. FPC SYSTEi'! DRAWING t PROD 0 RSP DATE TITlE DESCRIPTION T0425-095 (1) C3863-03. (1) F3860-05.
(CONTINUED) ALSO REFERENCE DRAWING NO. 3623353. NOTE' CSU EQUIPi'lENT.
T0425-096 07 UTS 40 2874143 03-82 HDQ· PRINTER 16G/40 CPS - FOR DESKSTATION MODEL 40 SL 40 HIGH DEFINITION QUALITY PRINTER. 160 CPS
BI-DIRECTIONAL WHEN PRINTING 9X7 DOT-MATRIX CHARACTERS. 40 CPS UNIDIRECTIONAL WHEN PRINTING 18X4G DOT MATRIX CHARACTERS. INCLUDES FRICTION FEED PLATEN. 9-PIN DISPLACED-PIN PRINTHEAD.
BLACK-INKED RIBBON. POWER CABLE AND CONNECTOR.
AND 8 BIT PERIPHERAL INTERFACE. INCLUDES THE SAME SPERRY STANDARD OPERATOR SELECTABLE CHARACTER SETS AS THE DATA PROCESSING QUALITY PRINTER. REQUIRES HIGH DEFINITION QUALITY CHARACTER SET SELECTION C3865-XX LISTED UNDER F3864-00. 120 VOLTS. 60HZ.
NOTE' THE PRINTHEAD AS WELL AS THE RIBBON ARE CONSUMABLES AND ARE THE CUSTOMERS RESPONSIBILITY TO REPLACE. REFER TO THE SUPPLIES SECTION OF THE PRICE BOOK. HARDWARE TO BE SUPPLIED'
(1) 0425-08. (11 F3860-05. AND (1). C4316-00 AND (1) C3381-00.
OR DEPENDING ON AVAILABILITY' (1) 0425-02.
(1) F3860-05. (1) C3865-09.
ALSO REFERENCE DRAWING NO. 3628353. NOTE' CSU EQUIPMENT T0425-097 07 UTS 40 2874143 03-82 DPQ PRINTER 160 CPS
SL 40 DATA PROCESSING QUALITY PRINTER. 160 CPS BI-DIRECTIONAL. 9X7 DOT MATRIX. CHARACTER SERIAL
INCLUDES FRIcnON FEED PLATEN. 9-PIN IN-LINE PRINTHEAD. BLACK INKED RIBBON. POWER CABLE AND CONNECTOR AND a-BIT PERIPHERAL INTERFACE.
60HZ. 12& VOLT.
NOTE 1·' INCLUDES ALL OF THE FOLLOWING UNIVAC STANDARD CHARACTER SETS WHICH ARE OPERATOR SELeCTABLE'
USA ASCII UNITED KINGDOM FRANCE GERMANY ITALY SWEDEN/FINLAND DENMARK/NORWAY SPAIN
NOTE 2' THE PRINTHEAD AS WELL AS THE RIBBON ARE CONSUMABLES AND ARE THE CUSTOMERS RESPONSIBILITY TO REPLACE. REFER TO THE SUPPLIES SECTION OF THE PRICE BOOK. HARDW"RE TO BE SUPPLIED' .
(1) 0.425-07. (1) C4316-00. (1) F3860-05 AND (1) C3381-00.
OR DEPENDING ON AVAILABILITY' (1) 0425-00.
(1) C38n-03. AND (11 F3860-05. .
ALSO REFERENCE DRANIHG NO. 3628353. NOTE' CSU EQUIPMENT.
T0425-099 07 1100/60 2874143 01-82 TELETYPE-WRITER PRINTER 50/60HZ PRINTER WITH TELETYPE PROTOCOL INTERFACE. 160
CPS. BIDIRECTIONAL. 9X7 DOT-MATRIX. CHARACTER-SERIAl. INCLUDES TRACTOR FEED. 9 PIN IN-LINE PRINT HEAD. BLACK INKED RIBBON. AND 96 CHARACTER ASCII CHARACTER SET. REQUIRES POWER CORD SELECTiON (C33811. SO/60HZ. NOTE l ' CONNECTS ONLY TO UTS 40 VIA MUL TII'LE UF [F3783-00) OR CONNECTS VIA COI'IMUNICATION LINE TO DCI' 40. NOTE 2' MAY BE EXPANDED BY ADDITION OF KEYBOARD FEATURE F3902-00 AND 0719 CARD READER UF FEATURE F3903-00.
NOTE 3' CUSTOMER IS RESPONSIBLE FOR PROVIDING REPLACEI'IENT PRINT HEADS AND RIBBONS. HARDWARE TO BE SUPPLIED IS' (1) 0425-06. (1) F3861-00.
(1) F3860-03. AND (1) C38n-00. (REV. 8/83)
ALSO REFERENCE DRANING NO. 3628353. NOTE' CSU EQUIPMENT.
TD429-001 07 UTS4000 2832149 R50263 R-R 09-83 PRINTER 50HZ 220/2~OV SAME AS 0429-00 EXCEPT. '220/240V. 5.HZ TO~29-002 07 UTS4000 3832n, R50263 R-R 09-83 PRIHTER 50HZ 100V
SAME AS 0429-00 EXCEPT 50 HZ. 100V.
01-10-85
TYPE NUMBERS IN NUMERICAL SEQUENCE-SECTION I I TYPE' FPC SYSTEM DRAWING. PROD D RSP DATE TITLE DESCRIPTION T0429-003 07 UTS4000
T0429-006 07 UTS60 T0429-066 07 UNIX
T0429-067 07 UNIX
T0429-068 07 UNIX
T0429-069 07 UNIX
T0429-070 07 UNIX
T0429-o71 07 UNIX
T0429-072 07 UNIX
09-33 PRINTER W/FRICTION FEED 60HZ 120V 09-33 PRINTER W/COLOR 60HZ 120V R-R 11-3< MODEL 35 PRINTER COLOR RS232 SAME AS 0<29-67 EXCEPT 220/240V, 50HZ.
NOTE' SEE NOTE FOLLOWING 0<29-67.
HARDWARE TO BE SUPPLIED IS'
(1) 0<29-07 (1) F3860-07 ( l l F<582-o0 ( l l C<003-00
R-R 11-84 MODEL 35 PRINTER COLOR R5232 SERIAL IMPACT MATRIX PRINTER SUBSYSTEM WITH fORMS TRACTOR fOR MULTICOLOR PRINT. PRINTS AT 400 CPS USING A 9X7 DOT MATRIX WHILE IN DPQ MODE AND 167 CPS USING AN 13X40 DOT MATRIX IN HOQ MODE. INCLUDES RS232 (25-PIN) INTERFACE MODULE AND FIRMWARE FEATURE (F4532-00) THAT PROVIDES ANSI COMPATIBLE PROTOCOL.
ALSO INLUDES MUL TICOLOR PRINT RIBBON FOR YELLOW, CYAN, MAGENTA AND BLACK PRINTING. REQUIRES HOST INTERFACE CABLE SELECTION FROM CABLE GROUP 1 OR 23, AND POWER CORD SELECTION C3381-XX. 120V/60HZ.
NOTE l ' THIS CONFIGURATION EXCLUDES FRICTION FEED.
HARDWARE TO BE SUPPLIED IS'
(1) 0429-06 (1) F3860-o7
(1) F4582-00 ( l l C4003-00
R-R 11-34 MODEL 35 PRINTER W/FF RS232 SAME AS 0429-69 EXCEPT 220/240V, 50HZ.
NOTE' SEE NOTE FOLLOWING 0429-69.
HARDWARE TO BE SUPPLIED IS'
(1) 0429-04 (1) F386o-07
(1) F4582-oo (1) C4003-00
R-R 11-84 MODEL 35 PRINTER W/FF RS232 SERIAL IMPACT MATRIX PRINTER SUBSYSTEM WITH FORMS TRACTOR AND FRICTION FEED FOR BLACK/WHITE PRINT. PRINTS AT 400 CPS USING A 9X7 DOT MATRIX WHILE IN DPQ MODE AND 167 CPS USING AN 18X40 DOT MATRIX IN HDQ MODE. INCLUDES MUL TINA TIONAL CHARACTER SETS RS-232 (25-PIN) INTERFACE MODULE (F3860-071 AND FIRMWARE FEATURE (F4582-00) THAT PROVIDES ANSI COMPATIBLE PROTDCOL.
REQUIRES HOST CABLE SELECTION FROM CABLE GROUP 1 OR 23, AND POWER CORD SELECTION C3381-XX. 120V/60HZ.
NOTE l ' THIS CONFIGURATION EXCLUDES MULTI-COLOR PRINTING.
HARDWARE TO BE SUPPLIED IS'
( l l 0429-03 (1) F3860-07 ( l l F4582-oo (1) C4003-00
R-R 11-84 MODEL 35 PRINTER RS232 SAME AS 0429-71 EXCEPT 220/2<OV, 50HZ.
NOTE' SEE NOTE FOLLOWING 0429-71.
HARDWARE TO BE SUPPLIED IS'
(1) 0429-01 (1) F3860-07
(1) F4532-o0 (1) C4003-00
R-R 11-34 MODEL 35 PRINTER RS232
SERIAL IMPACT MATRIX PRINTER SUBSYSTEM WITH FORMS TRACTOR FOR BLACK/WHITE PRINT. PRINTS AT <00 CPS USING A 9X7 DOT MATRIX WHILE IN DPq MODE AND 167 CPS USING AN 13X40 DOT MATRIX IN HDq MODE. INCLUDES MULTINATIONAL CHARACTER SETS, FIRMWARE FEATURE (F4532-oo) THAT PROVIDES ANSI CDMPATIBLE PROTOCOL AND AN RS-232 (25-PIN) INTERFACE MODULE (F386o-07l. REqUIRES HOST INTERFACE CABLE SELECTION FROM CABLE GROUP 1 OR 13. ALSO REQUIRES POWER CORD SELECTION C3381-XX. 120V/6oHZ.
NOTE l ' THIS CONFIGURATION EXCLUDES FRICTION FEED OR MUL TI-COLOR PRINTING.
HARDWARE TO BE SUPPLIED IS:
(1) 0429-00 (1) F3860-07
(1) F<582-00 (1) C4003-00
R-R 11-84 MODEL 35 PRINTER COLOR CENT I/F SAME A5 0429-73 EXCEPT 220n<OY, 50HZ.
NOTE' SEE NOTE FOLLOWING 0429-73.
HARDWARE TO BE 5UPPLIED IS'
CT0429-072 CONTINUED ON NEXT PAGE) 01-10-85
TYPE NUMBERS IN NUMERICAL SEQUENCE-SECTION It TYPE' FPC SYSTEII DRAIilNG ,. ·PR01I D. RSP DATE TITLE DESCR~PTION T0429-072
(CONTINUED) TO'<29-073 07 UNIX
T0429-074 01 UNIX
T0429-075 07 UNIX
T0429-076 07 UNIX
T0429-077 07 UNIX
. (1) 0429-07
(11 F4582-00 (1) F3860-06
(1) C4003-00
R-R 11-84 MODEL 35 PRIIiTER CDLOR ·CENT UF SERIAL IMPACT MATRIX PRIIiTER SUBSYTEI'I WITH FORMS TRACT DR FDR MUl TICOlOR PRINT. PRINTS AT 400 CPS USINO A 9X7 DDT MATRIX WHtLE IN DPQI'IODE AND 167 CPS USING AN 18X40 DOT IIATRIX IN HDQ MODE. INCLUDES CENTRONICS (36-PIII) IIiTERFACE MODULE AND ALSO FIRI'IWAREFEATURE (F45U-00) THAT PROVIDES AIISI COMPATIIILE PRDTOCOl. AlSD INCLUDES IIUl TICDLOR PRINT RIBBDN FDR YEllOW.
CYAN. MAGENTA AND BLACK PRINTING. REQUIRES HOST INTERFACE CABlE SELECTION FRDI'I CABLE GROUP 1 DR 23. AND PDW.ER CDRD SELECTION C3381-XX. 120Y/60HZ.
NOTE' THlS CDNFIGURATION EXCLUDES FRICTION FEED.
HARDWARE TO liE SUPPLIED IS'
(1) 0429-06 Cl) F3860-06
rl) F4582-00 (11 C4003-00
R-R 11-84 !'IODEL 35 PRINTER W/FF CENT UF SAME AS 0429-75 EXC£PT 220/240V. 50HZ.
HARDWARE TO BE SUPPLIED IS'
(11 0429-04 Cl) F3UO-Q6
Cl) F4582-00 (11 C4003-00
. . R-R 11-84 IIODEL 35 PRINTER W/FF CENT UF SERIAL IIIPACT MATRIX PRINTER SUBSYSTEII WITH FORMS TRACTDR AND FRICTION FEED FOR BLACK/WHITE PRINT. PRINTS AT 400 CPS USING A 9X7 DOT MATRIX WHILE IN DPQ MODE AND 167 CPS USING AN 18X40 DDT MATRIX IN HDQ MODE. INCLUDES MULTINATIONAL CHARACTER SETS.
CENTRONICS C36-PINI INTERFACE MODULE (F3860-06) AND FIRMWARE FEATURE (F4582-00) THAT PROVIDES ANSI COMPATIBLE PROTOCOL.
REQUIRES HOST CABLE SELECTION FROM CABLE GROUP 1 OR 23. AND POWER CORD SELECTIDN C3381-XX. 120Y"OHZ.
NOTE' THIS CONFIGURATION EXCLUDES MUL TI-CDLDR PRINTING.
HARDWARE TO BE SUPPLIED IS'
Cl) 0429-03 Cl) F31\60-06 (1) F4582-00 (11 C4003-00
. R"R 11-84 MODEL ·35 PRINTER CENT UF SAME AS 0425-77 EXCEPT 220/240Y. 50HZ.
NOTE' SEE NOTE FOllOWING 0429-71 • HARDWARE TO BE SUPPLIED IS'
(I) 0429~01 Cll F3860-06 (11 F4582:-00 (11 F~4003-00
R-R 11-84."IIODEL 35 PRINTER CENT UF
SERIAL IMPACT MATRIX PRINTER SUBSYSTEM WITH FORMS TRACTOR FOR BLACK/WHITE PRINT. PRINTS AT 400 CPS USING A 9X7 DOT MATRIX I;HIlE IN DPQMODE .. AND 167 CPS USIN~ AN 18X40 DOT MATRIX IN HDQ MODE.' INCLUDES MUl TINA HONAl CHARACTER SETS. FIRMWARE FEATURE (F4542-00) THAT PRDVIDES ANSI COMPATIBLE PRDTOCOL AND A CENTRONICS'06-PIN) INTERFACE MODULE (F3860-06l. REQUIRES HDST INTERFACE CABLE SELECtION FROM CABLE GROUP 1 OR 30.
ALSO REQUIRES POWER CORD SELECTION C3381-XX. 120Y/60HZ.