DRAWING I PROD 0 RSP DATE TITLE DESCRIPTION WITH S TABIL IZER
OF 2 HIGH SPEED SLCA'S AND/OR 2 AUTO DIAL FEATURES IS SUPPORTE ALSO PRovlDES SUPPORT FOR THE 5TH THROUGH 7TH INTEGRATED
PERIPHERAL CONTROL. INCLUDES EXPANSION CABINET. POWER SUPPLY AND POWER CONTROL. 1943-99 IS MUTUALLY EXCLUSIVE WITH' 1943-IMODELS 3 & 5 ECF). F3425-00 (MICROLOGIC EXPANSION) AND F2829-00 (PROCESSOR POWER EXPANSION) 60HZ (50HZ 1943-98).
HARDWARE TO BE SUPPLIED IS' II) 1943-00 CABINET II) F2796-00 MLCM II) F2795-00 SDMA II) F3367-00 IOMP.
REV. 12/81
Tl945-000 14 DCP/40 2823999 R-R 07-77 DCP/40 EXPANSION CABINET FREESTANDING CABINET FOR EXPANDING DCP/40 SYSTEM 8596-99.
CONTAINS A POWER SUPPLY & POWER CONTROL. WITH THE ADDITION OF F1933-00. ACCOMODATES UP TO FOUR lOP'S IFI932-00)' WITH THE ADDITIOH OF F2942-00. CAN ALSO ACCOMODATE UP TO THREE STORAGE BANKS OF UP TO 512K BYTES EACH. MAX 3 Tl945-00 PER SYSTEM ONLY ONE OF WHICH MAY CONTAIN STORAGE. REV. 5/82
Tl950-000 14 1900/10 2824733 R50236 R-R 04-79 TAPE/DISK CABINET 100/120V 60 HZ.
CADE A FREESTANDING CABINET CAPABLE OF HOUSING A MAXIMUM OF TWO F3282. F3283 OR F3285 DISK DRIVES. F3282 MAY BE INTERMIXED WITH F3283. BOTH ARE MUTUALLY EXCLUSIVE WITH F3285. THE CABINT WILL ALSO HOUSE EITHER UP TO TWO F3288 TAPE DRIVES OR ONE F3289 TAPE DRIVE.
Tl950-001 1~ 1900/10 Tl950-002 1~ 1900/10
2824733 2824733
R-R 04-79 SAME AS 1950-00 EXCEPT 100V. 50HZ.
R-R 0~-79 SAME AS 1950-00 EXCEPT 200/240 50HZ.
167 01-10-85
TYPE NUMBERS IN NUMERICAL SEQUENCE-SECTION #1 TYPE. FPC SYSTEM DRAWING t PROD D RSP DATE TITLE DESCRIPTION Tl951-000 14 SPOTS
490 494
Tl952-082 01 lloono
Tl952-083 01 lloono
Tl952-084 01 11001'70
Tl952-085 01 11001'70
Tl952-086 01 11001'70
Tl952-087 03 NUK ONLY Tl952-088 03 NUK
ONLY Tl952-089 14 1l00/60
Tl952-090 14 1l00/60
Tl952-091 14 1100/60
4113834- A-A 8-66 PBT MOBILE MAINT. PANEL'
PROVIDES INDICATORS,SWITCHES AND A VARIABLE SPEED INTERNAL CLOCK TO OPERAT.E AND DISPLAY THE REGISTERS AND FUNCTIONS OF A PBT AS REQD. FOR MAINT .CART MOUNTED-STORAGE PROVIDED FOR (A) 8-HEADED(104 PIN CONN. EACH) PBT CABL E. (B) DC POWER CORD AND eCl AC LINE CORD. COV.BY RPQ SPEC.SA-00666.
03-83 MODEL E TO H 50/60HZ
UPGRADES A MODEL El PROCESSING COMPLEX TO THE EQUIVALENT OF A MOOEL HI OR A MOOEL E2 PROCESSOR COMPLEX TO THE EQUIVALENT OF A MODEL H2. 60/S0HZ.
HOTE' ANY CUSTOMER CURRENTlY SUBSCRIBING TO SUPPORT SERVICES MUST ORDER A NEW SUPPORT SERVICE FEE WHEN UPGRADING THEIR CURRENT CONFIGURATION. HARDWARE TO BE SUPPLIED IS SAME AS FOR 1952-95.
03-83 MODEL C TO H 50/60HZ 220/240 VOLT SAME AS 1952-86 EXCEPT 50/60HZ 220/240 VOLT AND REQUIRES VOLTAGE SELECTION (C3395) AND POWER CORD SelECTION (C33811.
SEE 3064-97 FOR SelECTIONS. HARDWARE TO BE SUPPLIED IS SAME AS FOR 1952-91.
03-83 MODEL C TO H 60HZ. 120VOl T UPGRADES A MODEL Cl PROCESSING COMPLEX TO THE EQUIVALENT OF A MODEL HI. OR A MODEL C2 PROCESSOR COMPLEX TO THE EQUIVALENT OF A MODEL H2. 60HZ 120 VOLT.
NOTE' ANY CUSTOMER CURRENTlY SUBSCRIBING TO SUPPORT SERVICES MUST ORDER A NEW SUPPORT SERVICE FEE WHEN UPGRADING THEIR CURRENT CONFIGURATION.
HAROWARE TO BE SUPPLIED IS SAME AS FOR 1952-99.
03-83 MODEL C TO E 50/60HZ 220/240 VOLT SAME AS 1952-86 EXCEPT 50/6.0HZ 220/240 VOLT AND REQUIRES VOLTAGE SELECTION (C3395) AND POWER CORD SelECTION (C3381) SEE 3064-98 FOR SELECTIONS. HARDWARE TO BE SUPPLIEO IS SAME AS FOR 1952-89
03-83 MODEL C TO E 60HZ 120 VOLT UPGRADES A MODEL Cl PROCESSING COMPLEX TO THE EQUIVALENT OF MODEL El. OR A MODEL C2 PROCESSOR COMPLEX TO THE EQUIVALENT OF A MODEL E2. 60HZ 120 VOLT.
HOTE' ANY CUSTOMER CURRENTLY SUBSCRIBING TO SUPPORT SERVICES MUST ORDER A NEW SUPPORT SERVICE FEE WHEN UPGRADING THEIR CURRENT CONFIGURATION. HARDWARE TO BE SUPPLIEO IS SAME AS FOR 1952-96 •
Y-Y 01-83 MODEL C TO E 50/60HZ
SAME AS Tl952-096 EXCEPT NUK ONLY. HARDWARE TO BE SUPPLIED IS (1) K2681-01
Y-Y 01-83 MODEL C TO H 50/60HZ.
SAME AS Tl952-099 EXCEPT NUK ONLY. HARDWARE TO BE SUPPLIED IS (1) K2681-01. (1) F3613-00 AND ( l l K2683-00.
A-A 11-81 MODEL C TO E 220/240V 50/60HZ SAME AS 1952-96 EXCEPT 50f60 HZ 220/240V AND REQUIRES VOLTAGE SELECTION (C3395-XX) AHD POWER CORD SELECTION (C3381-XX).
SEE 3064-98 FOR SELECTIONS. HARDWARE DIFFERENCES AS NOTED' 3560-19 IN LIEU OF 3560-18.
A-A 11-81 MODel C TO E. 50/60HZ 100V SAME AS 1952-96 EXCEPT 50/60HZ. 100V AND HARDWARE DIFFERENCES
3560-19 IN LIEU OF 3560-18 PLUS ( l l C3395-00 AND ( l l C3381-00.
A-A 11-81 MODEL C TO H 50/60HZ 220/240V SAME AS 1952-99 EXCEPT 50/6QHZ 220/240V AND REQUIRES VOL TAGE SELECTION (C3395-XX) AND POWER CORD SELECTION (C3381-X (SEE 3064-98 FOR SELECTIONS). HARDWARE TO BE SUPPLIED IS' 0 ) K2681-01 (1) F3613-00
0 ) K2683-00 (1) F2868-01 0 ) 3560-23 ( l l F3392-02 (1) F3906-00 ( l l F3974-01
(Tl952-091 CONTINUED ON NEXT PAGE) 168 01-10-85
TYPE NUMBERS IN NUMERICAL SEQUENCE-SECTION 11 TYPE. FPC SYSTEM DRAWING. PROD D RSP DATE TITLE DESCRIPTION Tl952-091
(CONTINUED) Tl952-092 14 1100/60
Tl952-093
Tl952-095 14 1100/60
Tl952-096 14 1100/60
Tl952-097
Tl952-098 03 3042-76 3042-77 3042-78 3042-79 3042-81 Tl952-099 14 1100/60
Tl954-001 14 1100/90
Tl955-000 02 SYSTEM 80
Tl955-001 02 SYST 80 Tl955-096 02 SYST 80
NUK
(1) F8201-01 ( l l F3982-00 (1) F3388-00
(1) C3382-00 (ll C3983-00
(ll F3575-05 (REV. 9/83) A-A 11-81 MODEL C TO H. 50/60HZ 100V
SAME AS 1952-99 EXCEPT 50/60HZ 100V. HARDWARE TO BE SUPPLIED ( l l K2681-01 SIU - 2K
(1) F3613-00 2K-SIU EXPN.
(1) K2683-00 SIM EXPN 4K WORDS ( l l F2868-01 MTCE STATION (1) 3560-19 DISPLAY 50/60HZ (1) C3382-00 USA CHAR. SET (1) F3982-00 KEYBOARD (1) C3983-00 USA KEYCAPS (ll F3388-00 SECURITY KEYLOCK ( l l F3575-05 MODE CARTRIDGE ( l l C3395-00 VOLTAGE SELECTION (1) C3381-00 POWER CORD ( l l F3392-02 RAM
02-81 CANCELLED-HARDWARE INCLUDED IN 3064-98 A-A 08-80 MODEL E TO H UPGRADE
UPGRADES A MODEL El PROCESSING COMPLEX TO THE EQUIVALENT OF A MOOEL Hl. OR A MODEL E2 PROCESSOR COMPLEX TO THE EQUAL OF A MOOEL H2. TWO REQUIRED TO UPGRADE A MULTIPROCESSOR. HARDWARE IS , ( l l F3613-00. ( l l K2683-00.
A-A 08-80 MOOEL C TO E UPGRADE
UPGRADES A MODEL Cl PROCESSING COMPLEX TO THE EQUIVALENT OF A MODEL El, OR A MODEL C2 PROCESSOR COMPL EX TO THE EqUAL OF A· MODEL E2. HARDWARE IS THE SAME AS THAT LISTED FOR 1952-99 EXCEPT DO NOT INCLUDE F3613-00 OR K2683-00.
06-80 CANCELLED- SEE F2350-98 A-A 04-80 MODEL E TO H MP UPGRADE
UPGRADES A MODEL El OR E2 MULTIPROCESSOR TO A MODEL Hl OR H2 MUL TIPROCESSOR. CONSISTS OF TWO 6K HIGH SPEED BUFFER STORAGE EXPANSIONS. HARDWARE TO BE SUPPLIED CONSISTS OF ,
(2) F3613-00 SIU EXPN.-2K (CHANGED K3613 TO F3613 RPDC G1118) (2) K2683-00 SIU EXPN.-4K
A-A 11-81 MODEL C TO MODEL H UPGRADE 60HZ 120V UPGRADES A MODEL Cl PROCESSING COMPLEX (3042-99/98/971 TO THE EQUIVALENT OF A MODEL Hl (3042-93/92/91), OR A MODEL C2 (3042-96/95/94) TO THE EQUIVALENT OF A MODEL H2 (3042-90/89/88 HARDWARE TO 8E SUPPLIED CONSISTS OF'
( l l K2681-01 (1) F3613-00
(1) K2683-00 ( l l F2868-01 (1) 3560-22 (1) F3392-02 (1) F3906-00 (1) F3974-01 (1) F8201-01 (1) C3382-00 (1) F3982-00 (1) C3983-00
(1) F3388-00 (1) F3575-05 (REV. 9/84) 07-82 IPCU
INSTRUCTION PROCESSOR COOLING UNIT. PROVIDES COOLING FOR UP TO TWO INSTRUCTION PROCESSORS. REqUIRED WHEN THREE OR MORE IP'S ARE INCLUDED IN THE CONFIGURATION.
50/60HZ.
3627162 Pl0177 H-F 05-79 REMOTE PRINTER ATTACHMENT, 60HZ PROVIDES UF FOR REMOTE ATTACHMENT TO 0789 PRINTERS. LOCATED NEXT TO PRINTER. REQUIRES SELECTION FROM C3660-XX, AND THE USE OF F2794-XX REMOTE PRINTER UF.
3627162 Pl0177 H-F 05-79 REOTE PRINTER ATTACHMENT, 50 HZ.
SAME AS 1955-00 EXCEPT POWER
3627162 H-F 03-80 REMOTE PRINTER ATTACH. 50HZ (KHAKANA) SAME AS 1955-97 EXCEPT POWER AND HARDWARE IS ,
1955-01. F2794-01, C3660-01
Tl955-097 02 SYST 80 3627162 H-F 03-80 REMOTE PRINTER ATTACH. 60HZ (KATAKANAI
tT1955-097 CONTINUED ON NEXT PAGEl 169 01-10-85
TYPE NUMBERS IN NUMERICAL SEQUENCE-SECTION t l TYPE I FPC SYSTEM DRAWING I PROD D RSP DATE TITLE DESCRIPTION Tl955-097 SAME AS 1955-99 EXCEPT INCLUDES KATAKANA CAPABILITY.
(CONTINUED) HARDWARE IS' 1955-00, F2794-01 RP I/F KAT, C3660-01 KAT CHAR.
Tl955-093 02 SYST 30 3627162 H-F 03-30 REMOTE PRINTER ATTACH. 50HZ SAME AS 1955-99 EXCEPT 50 HZ AND HARDWARE IS 1955-01, F2794-00, C3660-00
Tl955-099 02 SYSTEM 3627162 H-F 03-30 REMOTE PRINTER ATTACHMENT, 60 HZ (LATIN) 30 PROVIDES CABINET, CONTROL, AND INTERFACE FACILITIES FOR
CONFIGURING ONE REMOTELY LOCATED 0789-XX PRINTER UP TO A MAX OF 5000 FT FROM THE CENTRAL COMPLEX. EXCLUDES KATAKANA HARDWARE IS ,
1955-00 REMOTE PRINTER ATTACHMENT 60HZ (lATIN) F2794-00 REMOTE PRINTER I/F
C3660-00 LATIN (WESTERN) CHAR SET
Tl962-000 14 DCP 20 2325109 R50219 R-R 11-81 LSM AUXILIARY CABINET