Cause: Operating or programming error.
Operator: If you are running a procedure, a command statement parameter might be incorrect. Select option 3.
If you are entering OCl statements from the key-board, a I I FilE statement is incorrect. Select option 3.
Note: #LlBRARY was specified as the lABEL param-eter in a II FI lE statement for a disk file. The system cannot process a disk file s~atement with that label.
Option 2:
Option 3:
Option 0:
Controlled cancel. Enter the remaining DCl statements. They are read and checked for errors, but the job is not executed.
Immediate cancel. New data created for this job is not preserved. See the discussion of Formatted Messages in section 1.
Immediate cancel with storage dump. New data created for this job is not preserved. See the discussion of Formatted Messages, in section 1, for an explanation of option D.
SCP Displayed Messages 2-43
Page of GC21-7704-1 Issued 17 October 1980 By TNL: GN21-8216
SCP-1369
FILE--RECORDS PARAM INVALID, USE BLOCKSCause: Operating or programming error.
Operator: If you are running a procedure, a command statement parameter might be incorrect. Select -option 2 or 3.
If you are entering OCl statements from the key-board, a II FI lE statement is incorrect. Select option 2 or 3.
Note: An attempt was made to allocate an offline multivolume disk file, but the RECORDS parameter was specified in the II FILE statement for that file.
Specify the BLOCKS parameter for an offline multivolume file. The program filename for the file is logged on the line preceding this message.
SCP-1370
FILE--RESTART REQUIRED BY $FREE-HIGHCause: Machine error.
Operator: Select option 3. Run the COMPRESS procedure before rerunning the job.
Note: System detected that a compression with a F R EE-H IGH had been interrupted (for example, by power outage). The COMPRESS procedure must be completed to move all files to the low end of the disk (next to the library) before rerunning the job. For further information about the COMPRESS procedure, see the IBM System/32 System Control Programming Reference Manual, GC21-7593.
SCP-1371
FILE--RESTART REQUIRED BY$FREE-LOW
Cause: Machine error.
Operator: Select option 3. Run the $FR EE utility program specifying the FR EE-lOW parameter, then rerun the job.
Note: System detected that a compression with a FREE-lOW had been interrupted (for example, by power outage). The $FREE utility program must be run to move all files to the high end of the disk before rerunning the job. For further information about the $FREE utility program, see the IBM System/32 System Control Program-ming Reference Manual, GC21-7593.
SCP-1461
PERMANENT I/O ERROR WITHIN RD VTOCCause: Diskette error.
Operator: A diskette error was detected while reading or writing within the VTOC. Select option 3 to cancel the job.
SCP-1472
DISKETTE NOT 512-BYTE SECTOR FORMATCause: Operating error.
Operator: The inserted diskette is not in the extended format (512 bytes per sector). The program running requires that an extended format diskette be pro-cessed. I nsert the correct diskette and select option 1 to retry. Otherwise, select option 2 or 3 to cancel the job.
SCP~1473 DISKETTE NOT 128-BYTE SECTOR FORMAT
Cause: Operati ng error.
Operator: The inserted diskette is not in the basic data excha nge (128 bytes per sector) format. The pro-gram running requires that a basic data exchange format be processed. Insert the correct diskette and select option 1 to retry. Otherwise, select option 2 or 3 to cancel the job.
SCP~1474 INSERTED RD--INCORRECT
.
PHYSICAL FORMAT
Cause: Operating or programming error.
Operator: The inserted diskette is not in the same format as the previous diskette. Insert the correct diskette and select option 1 to continue the job.
Otherwise, select option 2 or 3 to cancel the job.
Note: Diskettes are formatted by the I N IT procedure in either the basic data exchange format, twenty-six 128-byte sectors per track, or extended format, eight 512-byte sectors per track. To determine the format of the diskette, run the CATALOG procedure. For further information about the I N IT procedure and the CATALOG procedure, see the IBM System/32 System COntrol Programming Reference Manual, GC21-7593.
OPtion 0: Continue the job. The OCl statement In elror IS Ignored.
Option 1: Retry the operation and continue the job
Page of GC21-7704-1 Issued 17 October 1980 By iNL: GN21-8216
SCP-1475
INCOMPATIBLE FORMATSCause: Operating or programming error.
Operator: A file on the inserted diskette cannot be processed. Select option 3 to cancel the job.
Note: The diskette format specified in the diskette volume label does not match the format specified in the header label for the file. The format specified in the volume label must be either basic data exchange (128 bytes per sector) format or extended format (512 bytes per sector). The format of the file being processed must be the same as the format specified in volume label.
OPtion 2: Controlled cancel. Enter the remaining OCl statements. They are read and checked for errors, but the job IS not executed.
Option 3: Immediate cancel. New data created for thiS job is not preserved. See the discussion of Formatted Messages in section 1.
Option 0: Immediate cancel with storage dump. New data created for thiS Job IS not preserved. See the diSCUSSion of Formatted Messages, in section 1, for an explanation of option D.
SCP Displayed Messages 2-44.1
This page is intentionally left blank.