• Keine Ergebnisse gefunden

SCP-2340 ERROR WHILE READING SOURCE MEMBER

Im Dokument IBM System/32 Displayed Messages (Seite 117-121)

Cause: Operating error.

Operator: Select option 3.

Note: The read on the specified source member completed abnormally.

Option 2:

Option 3:

Option 0:

Controlled cancel. Enter the remaining OCl statements. They are read and checked for errors, but the job is not executed.

Immediate cancel. New data created for this job is not preserved. See the discussion of Formatted Messages in section 1.

Immediate cancel with storage dump. New data created for this job is not preserved. See the discussion of Formatted Messages, in section 1, for an explanation of option D.

SCP Displayed Messages 2-103

SCP-2341 'END' STATEMENT NOT FOUND

Cause: Operat!ng error.

Operator: Select option 3.

Note: End-of-file occurred on the source library member containing the WPCU specification statements before the END specification statement was read.

SCP-2342 INVALID SPECIFICATION STATEMENT

Cause: Operati ng error.

Operator: Select option 1 if specification statements are entered via the keyboard and reenter statements correctly. Otherwise, select option 3.

Note: An invalid identifier was entered. Val id statement identifiers are: LINE, REMOTE, MSG, MEMBER, RECORD, and END. An * appears below the invalid identifier.

SCP-2343 DUPLICATE SPECIFICATION STATEMENT

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and enter the next statement. Otherwise, select option 3.

SCP-2344 REQUIRED STATEMENT MISSING

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and enter the proper statement. Otherwise, select option 3.

Note: A required LINE or REMOTE statement was not

SCP-2345 STATEMENT NOT IN SEQUENCE

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and enter the next statement. Otherwise, select option 3.

Note: The specification statements were not entered in order. The correct order for statement identifiers is: LINE, REMOTE, MSG (if any), MEMBER (if any), RECORD (if any), and END.

SCP-2346 INVALID KEYWORD ON LINE STATEMENT

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and correct the keyword in error. Otherwise, select option 3.

SCP-2347 DUPLICATE KEYWORD ON LINE STATEMENT

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the key board and reenter the LI N E statement correctly. Otherwise, select option 3.

Note: A keyword in a LINE statement was entered more than once. An * appears below the duplicate keyword.

SCP-2348 INVALID PARAMETER ON LINE STATEMENT

Cause: Operating error.

Operator: Select option 1 if specification statements

SCP-2349 REQUIRED KEYWORD 'MODE ' MISSING

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and reenter the correct LINE statement. Otherwise, select option 3.

Note: The LINE statement does not contain the MODE keyword.

SCP-2350 'XMITID'tRCVID' NOT PAl RED

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and reenter the correct

LINE statement. Otherwise, select option 3.

Note: Only one of the two keywords was entered. The XMITID keyword must be paired with the RCVID keyword and vice versa.

SCP-2351 INVALID KEYWORD ON REMOTE STATEMENT

Cause: Operating error.

Operator: Select option lif specification statements are entered via the keyboard and correct the keyword in error. Otherwise, select option 3.

Note: The REMOTE statement contains an invalid keyword. Valid keywords are: TYPE-, BSIZE-, DEVICE-, and 10-. An

*

appears below the keyword in error.

Option 0: Continue the job. The DCl statement in error is ignored.

Option 1: Retry the operation and continue the job.

SCP-2352 DUPLICATE KEYWORD ON REMOTE STATEMENT

Cause: Operating error .

Operator: Select option 1 if specification statements are entered via the keyboard and correct the REMOTE statement. Otherwise, select option 3.

Note: A keyword in the R EMOTE statement was entered more than once. An * appears below the dupl icate keyword.

SCP-2353 INVALID PARAMETER ON REMOTE STATEMENT

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and correct the parameter in error. Otherwise, select option 3.

Note: The R EMOTE statement contains an invalid parameter. An * appears below the parameter in error.

SCP-2354 REQUIRED KEYWORD 'TYPE' MISSING

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and reenter the correct R EMOTE statement. Otherwise, select option 3.

Note: The TYPE- keyword is missing from the R ~MOTE statement.

Option 2: Controlled cancel. Enter the remaining DCl statements. They are read and checked for errors, but the job is not executed.

Option 3: Immediate cancel. New data created for this job is not preserved. See the discussion of Formatted Messages in section 1.

Option 0: Immediate cancel with storage dump. New data created for this job is not preserved. See the discussion of Formatted Messages, in section 1, for an explanation of option D.

SCP Displayed Messages 2-105

SCP-2355 TRANSPARENT OPERATION NOT PERMITTED

Cause: Operating error.

Operator: Select option 3.

Note: The LI N E statement may specify XPCY - Y with a remote TYPE of OM 1 or OM2. Transparency is not supported for office machine work stations or the System/32 data file logical record length may exceed the BSC buffer size on a transmit request.

SCP-2356 MORE THAN 4 MSG STATEMENTS

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and enter the next required statement. Otherwise, select option 3.

Note: More than four MSG statements were entered.

SCP-2357 MSG STATEMENT TEXT INVALID

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and correct the MSG statement in error. Otherwise, select option 3.

Note: An inval id MSG statement text was entered.

MSG text must be enclosed with single quotes and the text must not exceed 80 characters. An * appears below the invalid text.

SCP-2358 MSG STATEMENT INVALID FOR RECEIVE MODE

Cause: Operating error.

Operator: Select option 1 if specification statements

SCP-2359 MSG TEXT EXCEEDS 80 CHARACTERS

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and correct the MSG 5tatement in error. Otherwise, select option 3.

Note: The MSG statement text exceeds 80 characters.

SCP-2360 MEMBER STATEMENT INVALID

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and enter the next required statement. Otherwise, select option 3.

Note: A MEMBER statement was entered for sequential file processing, or more than the maximum number of MEMBER statements were entered.

SCP-2361 INVALID KEYWORD ON MEMBER STATEMENT

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and correct the keyword in error. Otherwise, select option 3.

Note: An invalid keyword was entered in the MEMBER statement. An * appears below the keyword in error.

SCP-2362 DUPLICATE KEYWORD ON MEMBER STATEMENT

Cause: Operating error.

Operator: Select option 1 if specification statements are entered via the keyboard and reenter the MEMBER statement correctly. Otherwise, select

SCP-2363 INVALID PARAMETER ON

Im Dokument IBM System/32 Displayed Messages (Seite 117-121)