BLOCK I ADDRESS ATTRIBUTE I PHYSICAL ADDR
PRBLIMIRARY 8688 OSER MAIIOAL SECTION 7. SYSTEM SPECS
CONTROL PORT BIT ASSIGNMENTS
============================
BIT NAME FUNCTION
=============================================================
ADR15
1 INTOUT
2 LOCK
This bit is used to replace A15 from the Z89 when accessing the Mul tibus.
This bit is used to generate an interrupt to the host processor.
Since the interrupts are edge triggered, this bit should be toggled to guarantee that a new interrupt is seen by the host.
This bit is used to lock the Mul tibus so tha t a test-and-set function may be implemented. It must be reset to allow other masters to acquire the bus.
Specification Revision 4.2, Ray 27, 1982 Page 117
PRBLIIi. 8611 OSER IIAIIOAL APP.A. REPAIR PROCBDORBS
APPDDIX A.
ALms 1fARRAIIft', SBIPPIaG DAllAGB IBSPBC'.rIOB,
AlII) RBPAIR PROCBDURBS
Altos Computer Systems warrants_each of its products to be free from defects in materials and workmanship for a period of 90 days from date of purchase by the end~user. During the warranty period, Altos, at its option, will repair or replace components in the products that prove to be defective at no charge other than shipping and handling, provided the product is returned prepaid to an authorized Altos Service Center or to Altos Computer Systems, 2360 Bering Drive, San Jose, California 95131.
This warranty will not be effective if, in the opinion of Altos Computer Systems, the Altos product has been damaged by aCCident, misuse, misapplication, or as a result of service or modification by other than an authorized Altos service center.
This warranty is expressly exclusive and in lieu of all other warranties or guarantees either express or implied.
including, but not limited to the implied warranties of merchantability and fitness for a particular purpose. In no event shall Altos be liable for lost prof its, loss of good will, or any other special or consequential damages.
Return of the End-User Registration Card is required for this warranty to be valid. War ranty claims are void unless the End-User Registration Card and Dealer Registration Card are on file at Altos Computer Systems.
Revision B. March 22,1982 PILE: APPAl 3/18/82 A-I
PRELIM. 8611 USER MAllUAL APP. A. REPAIR PROCEDURES Systems., Customer Service Dapartment, Attention: CLAIMS. If no exterior damage exists,. llnpack the microcomputer and inspect for hidden damage. All insurance claims for damage must be filed by
2. Contact Moore Business Systems for nationwide service.
Moore Business Systems price information and procedures.
3. Contact Altos Computer Systems Customer Service Department for factory depot service.
Altos Computer Systems
PIlELIII. 8688 OSER IIAIIOAL APP.A. REPAIR PIlOCBDORES
ALTOS PAcmRY RBPAIR PROCEDURES
Follow the steps in the following procedure to obtain Altos factory repair services:
1. Contact Customer Service for assistance in ensuring that your system needs factory service, and to minimize the occurance of ~no problem foundn when your system is returned for repair.
2. Obtain War ran ty or standard Return Author iza tion Number. At the time the Return Authorization Number is assigned you will need to provide the following
information:
a. Model Number of your system.
b. Serial Number c. Date Purchased d. Specific Problem
e. Purchase Order Number or Authorization for any repair charges
f. Name, address and telephone/telex number of your company and name of a responsible technical person whom Altos Customer Service may contact in the event of any question or problems
3. Ship defective Altos computer in original shipping container, with the Return Authorization Number clearly labeled on the outside of the container. Include a detailed description of the symptoms of the malfunction, and any special instruction. Follow all shipping and packing instructions contained in your user manual.
a. warranty freight:
The End-User pays freight to Service Center.Altos Service Center pays return freight via like carrier
b. Non-Warranty Freight:
The End-User pays freight both ways CAtJIlIIOR
Alto Custoaer Service is not responsible for the loss of data on any system returned for repair. A syste. returned for repair viII be fully tested, and this testing viII destroy all data on any hard disk product.
Revision B. March 22,1982 PILB: APPA2 3/18/82 A-3
PRELIM. 8688 OSER IIAIIOAL APP.B. TROUBLB SBOOTIBG
APPDDIX B.
TROUBLB SBOOTIBG PROCEDURES
(THESE PROCEDURES WERE IN DEVELOPMENT AT THE TI ME TH IS REVISON WAS PRINTED.)
Revision B. March 22,1982 PILB: APPAl 3/19/82 B-1
PRELIM. 8688 OSER IIAIIUAL APP. C. CORPIGORATIORS
APPBRDIX C.
COIlllOR CRIf' TBRIIIIIAL AJID PIlIll'UR III'tBRPACB CORPIGURATIOllS
(THESE PROCEDURES WERE IN DEVELOPMENT AT THE TIME THIS REVISON WAS PRINTED.)
;
Revision B. March 22,1982 FILB: APPC2 3/18/82 C-l
PRELIMIRARY 8688 OSER MAIIOAL APP.D. PIIIHIBG PCB'S
APPBlmIX D.
IBSDucrIOIIS FOR PIlIIIIBG CIRCUIT BOARDS
(THESE PROCEDURES WERE IN DEVELOPMENT AT THE TIME THIS REVISON WAS PRINTED.)
Revision B. March 5,1982 PILB: APPD2 3/19/82 D-1
PRBLIM. 8688 OSBR IIAIIOAL APP. B. IlAmIX IIAPS
APPBRDIX B.
IlAmIX IIAPS
(THESE MATRIX MAPS WERE IN DEVELOPMENT AT THE TIME THIS REVISON WAS PRINTED.)
Revision B. March 22,1982 FILS: APPB1 3/19/82 B-1
PRELl.. 8688 OSER RABOAL APP. P. SCBBIIA'lICS
APPBRDIX P.
SCBBllA2IIC DIAGRAIIS
(THESE SCHEMATIC DIAGRAMS WERE IN DEVELOPMENT AT THE TIME THIS REVISON WAS PRINTED.)
Revision B. March 22,1982 PILB: APPP1 3/19/82 P-1
PRELIM. 8688 OSER IWIUAL APP. G. IlAIlftBRAllCB
APPBRDIX G.
PRBVBftIVB IlAIlftBDIICB PROCBDURBS
(THESE PROCEDURES WERE IN DEVELOPMENT AT THE TIME THIS REVIS ON WAS PRINTED.)
Revision B. March 22,1982 FILB: APPG1 3/19/82 G-1
Altos Computer Systems World Headquarters
2360 Bering Drive San Jose, CA 95131
U.S.A.
(408) 946-6700 Telex: 171562 ALTOS SJN
I