• Keine Ergebnisse gefunden

myAVR myAVR myAVR myAVR

N/A
N/A
Protected

Academic year: 2022

Aktie "myAVR myAVR myAVR myAVR "

Copied!
2
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

myAVR myAVR myAVR myAVR

www.myAVR.de © Laser & Co. Solutions GmbH – 06/2010 www.myAVR.com

Technische Beschreibung technical description

myUSBtoUART

Die myUSBtoUART stellt einen virtuellen COM-Port für die Kommunikation zwischen dem PC und dem Mikrocontroller zur Verfügung. Dies wird mit Hilfe von einem CP2102 Con- troller der Firma SILABS durchgeführt.

Zur Arbeit mit der myUSBtoUART muss der USB Treiber für myAVR Produkte auf Ihrem PC installiert sein. Den Treiber finden Sie unter:

www.myavr.de Shop Download Suchbegriff: „Treiber“

The myUSBtoUART provides a virtual COM port for communi- cation between the PC and the micro-controller. This is done by using a CP2102 controller of the company SILABS.

If you want to work with the myUSBtoUART the USB driver for myAVR products must be installed on your PC. You can find this driver on our website:

www.myavr.com shop download keyword: “Driver”

Besonderheiten

Das myUSBtoUART-Modul ist sehr kompakt gehalten. Der Anschluss zum PC erfolgt mit Hilfe eines Mini-USB- Anschlusses. Ausgangsseitig stehen RXD und TXD, CTS und RTS, sowie Spannung (5V) und Masse zur Verfügung.

Eigenschaften

• Mini-USB-Anschluss

• TTL kompatibel

• Unterstützte Baudraten: 300, 600, 1200, 1800, 2400, 4000, 4800, 7200, 9600, 14400, 16000, 19200, 28800, 38400, 51200, 56000, 57600, 64000, 76800, 115200, 128000, 153600, 230400, 250000, 256000, 460800, 500000, 576000, 921600

• Unterstützte Paritäten: None, Even, Odd, Mark, Space

• Unterstützte Datenbits: 5, 6, 7, and 8

• Unterstützte Stoppbits: 1, 1.5(bei 5 bit), 2

• Leiterplatte gebohrt, verzinnt, Industriefertigung, ro- bust

• Abmaße ca. 26 mm x 12 mm x 6 mm

• Lochraster der Lötösen: 2,54 mm

Specificities

The myUSBtoUART module is very compact. The con- nection to the PC using a mini-USB port. Output side, RXD and TXD, CTS and RTS, as well as voltage (5V) and mass are available.

Properties

• Mini-USB port

• TTL compatible

• Supported baud rates: 300, 600, 1200, 1800, 2400, 4000, 4800, 7200, 9600, 14400, 16000, 19200, 28800, 38400, 51200, 56000, 57600, 64000, 76800, 115200, 128000, 153600, 230400, 250000, 256000, 460800, 500000, 576000, 921600

• Supported parities: None, Even, Odd, Mark, Space

• Supported data bits: 5, 6, 7, and 8

• Supported stop bits: 1, 1.5 (at 5 bit), 2

pre-drilled, tin-plated, industrial production, solid

• Dimension approximately 26 mm x 12 mm x 6 mm

• hole spacing of solder lugs: 2,54 mm

Power LED

USB-Chip

Bohrungen für Zugentlastung Holes for stress relief Mini-USB-Anschluss

Mini-USB interface

Pinbelegung Pin assignments

1 = CTS 2 = RTS Befestigungsösen

Fastening eyes

4 = GND 3 = VCC 2 = RXD 1 = TXD

(2)

Produktbeschreibung / product description myUSBtoUART 2/2

www.myAVR.de © Laser & Co. Solutions GmbH – 06/2010 www.myAVR.com

Technische Daten Technical Data

Betriebsdaten Operating Data

Versorgungsspannung 5 V über den USB-Bus Supply Voltage 5 V via USB bus

Betriebsstrom

10-20 mA typisch ohne weitere Verbraucher

bis 100 mA bei Anschluss an Zielsysteme

Operating Current

10-50 mA typical without other loads

up to 100 mA if connected to target system

Betriebsspannung 5 V Operating Voltage 5 V

Betriebstemperatur 0 °C bis +30 °C Operating Temperature 0 °C to +30 °C

Maximalwerte Maximum Values

Maximalspannung 5,3 V über den USB-Bus Maximum Voltage 5.3 V via USB bus Maximalstrom 100 mA über den USB-Bus Maximum Current 100 mA via USB bus Lagertemperatur -20 °C bis +70 °C Storage Temperature -20 °C to +70 °C

Mechanische Daten Mechanical Data

Abmaße (L x B x H): ca. 25 mm x 12 mm x 7 mm Dimensions (LxWxH): ca. 25 mm x 12 mm x 7 mm

Gewicht: ca. 1 g Weight: ca. 1 g

Leiterplattenmaterial: FR8, 1,5 mm Dicke, 0,35 µm Cu Auflage, zweiseitig, Lötstopp- maske, verzinnt, durchkontaktiert

Printed Circuit Board Mate- rial:

FR8, thickness 1.5 mm, Cu layer 0.35 µm, two-sided, soldering resist mask, tin-plated, plate through

Anwendungsbeispiele / Examples of use

Hersteller

/

Producer

Laser & Co. Solutions GmbH · Promenadenring 8 · 02708 Löbau, Deutschland/Germany Internet: www.myAVR.de, www.myAVR.com Email:

Die aktuellsten Dokumente zur myUSBtoUART Bridge finden Sie unter www.myAVR.de im Downloadbereich.

The latest documents for the myUSBtoUART Bridge you can find at our homepage www.myAVR.com under

„Download“.

Abbildungen können vom Inhalt abweichen. Änderungen im Sinne des technischen Fortschrittes behält sich der Hersteller vor. Images may vary from the content. The manufacturers retains changes in terms of techni- cal advances.

Abbildung / picture:

myUSBtoUART mit Schaltdraht myUSBtoUART with equipment wire Abbildung / picture:

myUSBtoUART mit myAVR Board light und LCD Add-On myUSBtoUART with myAVR Board light and LCD Add-On

Referenzen

ÄHNLICHE DOKUMENTE

Die Zusatzplatine myDigitalOut erweitert das myAVR Board um vier Relais-Ausgänge.. Über diese können Schaltvorgänge mit einer Leistung bis 30 Watt realisiert

For a check with the SD-card you need an FAT16- formated SD-card with data at the radix; for example myAVR

Als erweitertes Modul steht die myAVR Stamp als PLUS- Variante zur Verfügung, welche zusätzlich über einen Mini- USB-Anschluss mit dem bewährten CP2102 sowie einen

Solutions GmbH – 01/2010 / Devtronic SARL – 01/2010 www.myAVR.fr myAVR Stamp Vorder- und Rückseite / myAVR Stamp recto et verso. Anwendungsbeispiel /

technische Beschreibung / technical description myAVR Stamp 3/17.. Allgemeine Beschreibung

Als erweitertes Modul steht die myAVR Stamp als PLUS- Variante zur Verfügung, welche zusätzlich über einen Mini- USB-Anschluss mit dem bewährten CP2102 sowie einen

myEthernet und myTWI Echtzeituhr Add-On am myAVR Board MK3, Steuerung und Konfiguration über Internet Explorer myEthernet, l’horloge temps réel myTWI et la carte myAVR MK3, contrôle

Widerstände, Led’s und Fotosensor anlöten Soldering of resistors, Led’s and photo sensor.. Danach löten Sie die Widerstände, LEDs und den Fotosensor