Volltext
Fig. 1 Details of specimen with piezoresistive bond line under transversal tension
1
Fig. 2: Details of specimen with piezoresistive bond line in tapered finger joint under tension
2
Fig. 3: Details of specimen with piezoresistive bond line under shear with compression
3
Fig. 4: Details of glulam beam with locally isolated piezoresistive bond lines strained in shear, bending tension and bending compression
4
ÄHNLICHE DOKUMENTE
The Newman and Raju formula for the stress intensity factor of a semi-elliptical surface crack loaded in uniaxial tension or in bending has been developed about 30 years ago using
The influence of transverse shear forces on the dynamic plastic be- haviour of beams, plates and shells subjected to impulsive and impact loading has attracted the interest of
neutral surface нейтральный слой равновесие, баланс balance prove, proven доказывать распределенная нагрузка distributed load shear force
The fundamental idea of incremental die bending [13], is to insert a round bar, tube, or profile through a moveable forming device into a die or a die system form with seg-
biodiversity impact of land-use change) used by the IAMs to model increased conservation efforts cannot be made 699. freely available due to the terms of use of their source, but
Using the Emergency Recovery Plan to set global targets and indicators for freshwater biodiversity If these priority actions are to be progressed widely and rapidly, a
7 Model of strains, which influence the piezoresistive reaction of the electrically conductive bond line in wood with the tested load situations a transversal tension
Therefore, in this paper, a stereo camera system combined with a photogrammetric approach is proposed to evaluate the values and variations of the shear modulus of glulam beams under
