• Keine Ergebnisse gefunden

Process and Material Development in RWTH Start-up

N/A
N/A
Protected

Academic year: 2022

Aktie "Process and Material Development in RWTH Start-up"

Copied!
1
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

www.ita.rwth-aachen.de

Contact:

Alexander Lüking

Alexander.lueking@ita.rwth-aachen.de

Academic thesis for students

Challenge and objective

In the interests of efficient and economical production of lightweight structures, a novel manufacturing process for thermoplastic fibre-reinforced composites (FRP) was developed and researched at the ITA of RWTH Aachen University. FibreCoat GmbH as a Start-Up was founded to commercialise this devel- opment. FibreCoat GmbH is currently working on scaling up the production process to industrial scale.

Thereby the thesis will be carried out in direct cooperation with ITA.

Your task/motivation/requirement

To start, you will first produce glass fibres yourself and then coat them using our novel production method. You will later evaluate the fibre composites produced in this way with regards to their mechanical properties using different analytical methods and compare them with commercial products.

As most of the materials are available, you will be able to begin your thesis immediately. What we offer is a personal and intensive supervision as well as a compact completion period. Upon a successful completion of your thesis, you would also have the chance to publish your work as a co-author.

Are you motivated to discover something new? Are you looking for good supervision for your thesis (FL/PA/BA/MA) and an exciting and promising topic? Then get in touch with us!

Process and Material Development in RWTH Start-up

Shawn Lim

Shawn.Lim@fibrecoat.de

20 mm 20 µm

Referenzen

ÄHNLICHE DOKUMENTE

In this work, epoxy nano-composites reinforced with three different types of carbon nano- fillers (thermally reduced graphene oxide (TRGO), graphite nano-platelets

The consequences of complex product development with high alternative drive systems to production lines were analyzed by BPMN models.. A further approach is to use

Among the new practices adopted by ST in the wake of its internal study were the assignment of a hll-time leader to the project; the scheduling of regular meetings among project

First of all, we develop a digital twin of an industrial process, in our case a conveyor belt system run by a servo motor (https://github.com/cangorur/servo_motor_simulation,

The excessively powerful public role of English is demonstrably an obstacle to national development, and its role thus needs to be curbed, with its role in public life redefined. As

In Project A, fluid bed granulation processes were investigated by in-line particle size measurements using spatial filtering velocimetry and in-line moisture

3.11 Yarn production using the long fibers obtained in the 200 L-scale pilot plant 92 4 Discussion 95 4.1 Development of the fiber treatment

For the production of WPC, different raw materials and polymers are suitable. Usually, wood flour with a low aspect ratio is used as a filler in thermoplastic composites.