• Keine Ergebnisse gefunden

myAVR myAVR myAVR myAVR

N/A
N/A
Protected

Academic year: 2022

Aktie "myAVR myAVR myAVR myAVR "

Copied!
2
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

myAVR myAVR myAVR myAVR

www.myAVR.de © Laser & Co. Solutions GmbH – 05/2008 / Devtronic SARL – 05/2008 www.myAVR.fr

Produktbeschreibung Description du produit

Laborkarte A

Die myAVR Laborkarte A ist ideal zur Realisierung von eigenen Schaltungen. Sie können Bauelemente im Rastermaß 2,54 mm flexibel anordnen und verdrahten. Der Verdrahtungsaufwand wird durch paarig verbundene Lötaugen reduziert. Die Laborkarte A ist robust und auf das myAVR Board abgestimmt.

La carte de prototypage myAVR A est la solution si vous souhaitez réaliser vos propres circuits. Sa grille au pas de 2,54 mm offre une grande flexibilité dans l’agencement et le câblage des composants. Certaines de ses rangées sont interconnectées ce qui permet de réduire sensiblement la quantité de câble nécessaire à la mise en œuvre d’un circuit. La carte de prototypage myAVR A est robuste et tout à fait adaptée à la carte myAVR Board mais vous pouvez tout aussi bien l’utiliser avec vos propres circuits.

Eigenschaften

• Steckerleiste für den Anschluss an das myAVR Board

• Buchsenleise für den Anschluss weiterer Module

• paarig verbundene Lötaugen

• Dokumentationsdruck

• Material: FR4, 1,5 mm; 0.35 µm Cu

Industriefertigung, gebohrt, verzinnt, Robust

Caractéristiques

• Connecteur pour relier le module à la carte myAVR

• Connecteur permettant la liaison à d’autres modules

• Rangées de trous interconnectées

• Documentation papier fournie

• Technologie PCB : FR4, 1,5 mm; 0.35 µm Cu

• Robuste et de qualité industrielle, pré-percée, finitions étains

Anwendungsbeispiele

/

Exemples d’utilisation

Abbildung / photo :

Makroaufnahme Projekt myTinyProg Rückseite Zoom sur le circuit du projet myTinyProg (vue verso) Abbildung / photo :

Projekt myTinyProg

Circuit du projet myTinyProg

Abbildung / photo :

Makroaufnahme Projekt myTinyProg Vorderseite Zoom sur le circuit du projet myTinyProg (vue recto)

(2)

Produktbeschreibung / Description produit Laborkarte A 2/2

www.myAVR.de © Laser & Co. Solutions GmbH – 05/2008 / Devtronic SARL – 05/2008 www.myAVR.fr Hersteller /Fabricant

Laser & Co. Solutions GmbH · Promenadenring 8 · 02708 Löbau, Deutschland/ Allemagne Internet: www.myAVR.de , www.myAVR.com Email: hotline@myAVR.de

Unser Regionalpartner / Notre distributeur officiel en France

Devtronic SARL · 24 rue Paul Fort · 78140 Vélizy-Villacoublay, France · Internet: www.myavr.fr · Email: contact@myavr.fr Abbildung / photo :

Versuchsschaltung mit einem Operationsverstärker Prototype à base d’amplificateur opérationnel

Abbildung / photo :

Versuchsschaltung mit einer Spule Prototype à base d’inductance

Abbildung / photo :

Adapter für TWI-Komponenten Adaptateur pour composants myTWI

Abbildung / photo :

Prototyp Physikexperiment Kondensator

Prototype de l’expérience de physique « condensateurs »

Referenzen

ÄHNLICHE DOKUMENTE

Zur Arbeit mit der myUSBtoUART muss der USB Treiber für myAVR Produkte auf Ihrem PC installiert sein.. Den Treiber finden

Für fehlerhaften und/oder vorschriftswidrigen Einsatz des Kits übernehmen wir keine Garantie.

The well-tinned soldering tip will be held at the solder- ing point during the soldering that you contact at the same time the wire of the component and the conduc- tor

2/14 Technische Beschreibung / technical description myAVR Board MK2, Version 2.20.. Die Informationen in diesem Produkt werden ohne Rücksicht auf einen eventuellen

With this software, you can also change the mySmartUSB from a programmer to a oscilloscop or logic analyzer via changing the firmware and back.. The circuit board offers

• einfache Kommunikation des Mikrocontrollers mit dem PC oder Notebook über die USB-Schnittstelle, stellt einen virtuellen COM-Port im PC zur Verfügung. •

Die Zusatzplatine myDigitalOut erweitert das myAVR Board um vier Relais-Ausgänge.. Über diese können Schaltvorgänge mit einer Leistung bis 30 Watt realisiert

The components of myAVR Stamp and the high speed programmer mySmartUSB MK3, as well as the graphic display on this development board are already integrated.. It has