• Keine Ergebnisse gefunden

ANFORDERUNGEN / REQUIREMENTS Nummer / Number Seite / Page Nummer / Number Seite / Page Fehler! Keine Indexeinträge gefunden.

N/A
N/A
Protected

Academic year: 2022

Aktie "ANFORDERUNGEN / REQUIREMENTS Nummer / Number Seite / Page Nummer / Number Seite / Page Fehler! Keine Indexeinträge gefunden."

Copied!
27
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

Page 3 of 35 2013-04-12

I NHALT / C ONTENTS

1 Einleitung ... 4

1.1 Zweck ... 4

1.2 Geltungsbereich ... 4

1.3 Begriffe ... 4

1.4 Referenzen ... 4

2 Installation ESXi 5.1 auf ProLiant DL180 G6... 5

3 Update vSphere Client ... 6

3.1 aber download bricht mehrmals nach 50% ab: ... 6

3.2 Download ab Supportseite und manuelle Deinstallation / neu-Installation .... 6

4 Speicher – Smart Array Controller Fehler auf Host ... 7

4.1 Nach einschalten bestehender Virtuelle Maschinen (WinXP VM's) folgt folgende Fehlermeldung:... 7

4.2 neu seit Update ESXi ist folgende Warnung auf den Array Controller: ... 8

5 Upgrade HP Smart Array P410 Controller Firmware... 9

5.1.1 HP Support Center – HP Proliant DL180 G6 Server Support ... 9

6 Installation VIB HP driver Pack Sept 1012 ... 11

6.1 HP Support Center – Drivers, Software and Firmware... 11

6.2 Installation ... 11

6.2.1 Prerequisites ... 11

6.2.2 Procedure... 12

6.2.3 CLI Hinweise ... 12

6.2.4 Konsolendeinstallation und Installation mittels putty: ... 12

6.3 Reboot RN-SV-05... 16

6.3.1 Aber: der RN-VM-Win2012 Server macht immer noch ein reboot alle paar Minuten:... 16

6.3.2 Und die WinXP Server können nach wie vor nicht hoch gefahren werden,... 17

6.4 Neuer Eintrag in Community Diskussion Upgrading ESXi 5.0 to ESXi 5.1 HP Smart Array P410i Warning... 17

6.5 Brack Tech Support Hotline... 17

6.6 HP business Support... 17

6.6.2 aber nach absenden des Fehlerberichtes neuer Hinweis auf Knowledge Base (2036572) ... 23

6.6.3 Downgrade again to hp-esxi5.0uX-bundle-1.3-12... 26

7 Eigenschaften Speicher Ressourcen (vSphere)... 29

8 Verschieben der VM’s auf LUN2 ... 32

9 Recommendations from VMware Community ... 34

A NFORDERUNGEN / R EQUIREMENTS

Nummer / Number Seite / Page Nummer / Number Seite / Page

Fehler! Keine Indexeinträge gefunden.

(2)

Page 4 of 35 2013-04-12

1 E INLEITUNG

1.1 Zweck

Dieses Dok dient als Anleitung zur Reproduktion und als Logfile für die durchgeführten Schritte beim Upgrade von ESXi 5.0 auf 5.1 mit anschliessender Treiberaktualisierung und Bugfix Massnahmen

1.2 Geltungsbereich

n/a

1.3 Begriffe

1.4 Referenzen

(3)

Page 11 of 35 2013-04-12

6 I NSTALLATION VIB HP DRIVER P ACK S EPT 1012

Gemäss Forum http://communities.vmware.com/thread/438699 sind Treiber in März Release buggy und müssen auf Treiber Sept 04 downgraded werden:

6.1 HP Support Center – Drivers, Software and Firmware

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5214568&spf_p.tpst=swdMain&spf_p.prp _swdMain=wsrp-

navigationalState%3Didx%253D2%257CswItem%253DMTX_f13f6dc749e348009133fcefd2%257CswEnvOID%253D4141%257CitemL ocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignett e.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

* RECOMMENDED * HP ESXi Offline Bundle for VMware ESXi 5.x

By downloading, you agree to the terms and conditions of the HP Software License Agreement.

Type: Software - System Management

Version: 1.3 (4 Sep 2012)

Operating System(s): VMware ESXi 5.0, VMware vSphere 5.1 File name: hp-esxi5.0uX-bundle-1.3-12.zip (9.2 MB)

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value

hp-esxi5.0uX-bundle-1.3-12.zip f0fae7ebfa0e48b899eb2c8ed5d0fa38

Reboot Requirement

Reboot is required after installation for updates to take effect and hardware stability to be maintained.

6.2 Installation

Installing Offline Bundles on an ESXi 5.x Host Using vSphere CLI 5.0 esxcli Utility

You can use the esxcli utility in conjunction with offline bundles or with a depot. This topic describes the procedure using offline bundles.

This bundle includes the following software versions

•cross_oem-hp-smx-provider_500.03.01.00.5-434156

•cross_oem-vmware-esx-drivers-char-500.9.0.0.9-1OEM.500.0.0.434156

•cross_oem-vmware-esx-drivers-char-hpcru_5.0.2.21-1OEM.500.0.0.434156

•cross_oem-hp-ams_500.9.2.0-11.434156. This is not intended for VMware ESXi 4.1.x.

6.2.1 Prerequisites

Before you can update or patch an ESXi 5.0 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 5.x (vSphere CLI).

You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about

importing or installing the vSphere CLI 5.x, see the VMware vSphere Command-Line Interface

Installation and Reference Guide.

(4)

Page 12 of 35 2013-04-12

6.2.2 Procedure

1. Power off any virtual machines that are running on the host and place the host into maintenance mode.

2. Transfer the offline bundle onto the ESXi host local path, or extract it onto an online depot.

3. Install the bundle on the ESXi host.

• Install remotely from client, with offline bundle contents on a online depot:

esxcli -s <server> -u root -p mypassword software vib install -d <depotURL/bundle-index.xml>

• Install remotely from client, with offline bundle on ESXi host:

esxcli -s <server> -u root -p mypassword software vib install -d <ESXi local path><bundle.zip>

• Install from ESXi host, with offline bundle on ESXi host:

esxcli software vib install -d <ESXi local path><bundle.zip>

4. After the bundle is installed, reboot the ESXi host for the updates to take effect.

5. (Optional) Verify that the vibs on the bundle are installed on your ESXi host.

esxcli -s <server> -u root -p mypassword software vib list

6. (Optional) Remove individual vibs. <vib name> can be identified by listing the vibs as shown in

#5.

esxcli -s <server> -u root -p mypassword software vib remove -n <vib name>

6.2.2.1 Installing Offline Bundles on an ESXi 5.x Host Using VMware vCenter Update Manager

The offline bundle can also be installed from VMware vCenter Update Manager as a patch. For more information and detailed instructions, see the VMware vCenter Update Manager Administration Guide.

6.2.3 CLI Hinweise

http://www.thomas-krenn.com/de/wiki/Esxcli_-_VIB_auf_einem_ESXi_5.0_Host_installieren

6.2.4 Konsolendeinstallation und Installation mittels putty:

login as: root

Using keyboard-interactive authentication.

Password:

The time and date of this login have been sent to the system logs.

VMware offers supported, powerful system administration tools. Please see www.vmware.com/go/sysadmintools for details.

The ESXi Shell can be disabled by an administrative user. See the vSphere Security documentation for more information.

(5)

Page 13 of 35 2013-04-12

~ # cd /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HpdriverPack

~ # esxcli software vib remove –n hp-smx-provider

~ # esxcli software vib remove –n char-hpilo

~ # esxcli software vib remove –n char-hpcru

~ # esxcli software vib remove –n hp-ams

~ # esxcli software vib remove –n hpacucli

~ # esxcli software vib remove –n hpbootcfg

~ # esxcli software vib remove –n hponcfg

~ # esxcli software vib remove –n hpnmi

~ # reboot

~ # esxcli software vib install -d /vmfs/volumes/50fdc63e-3da28ca5-2df5- e4115be23b79/HPdriverPack/metadata-hp-esxi5.0uX-bundle-1.3-12.zip [MetadataDownloadError]

Could not download from depot at zip:/vmfs/volumes/50fdc63e-3da28ca5-2df5- e4115be23b79/HPdriverPack/metadata-hp-esxi5.0uX-bundle-1.3-12.zip?index.xml,

skipping (('zip:/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/metadata-hp-

esxi5.0uX-bundle-1.3-12.zip?index.xml', '', 'Error extracting index.xml from /vmfs/volumes/50fdc63e- 3da28ca5-2df5-e4115be23b79/HPdriverPack/metadata-hp-esxi5.0uX-bundle-1.3-12.zip: "There is no item named \'index.xml\' in the archive"')) url = zip:/vmfs/volumes/50fdc63e-3da28ca5-2df5-

e4115be23b79/HPdriverPack/metadata-hp-esxi5.0uX-bundle-1.3-12.zip?index.xml Please refer to the log file for more details.

~ #

 falsches Zipfile als Depot: nicht nur metadata-zip !

~ # esxcli software vib install -d /vmfs/volumes/50fdc63e-3da28ca5-2df5- e4115be23b79/HPdriverPack/hp-esxi5.0uX-bundle-1.3-12.zip

Installation Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true

VIBs Installed: Hewlett-Packard_bootbank_char-hpcru_5.0.2.21-1OEM.500.0.0.434156, Hewlett- Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156,

Hewlett-Packard_bootbank_hp-ams_500.9.2.0-11.434156, Hewlett-Packard_bootbank_hp-smx- provider_500.03.01.00.5-434156

VIBs Removed:

VIBs Skipped:

~ #

~ # esxcli software vib list | grep -i hp

Name Version Vendor Accept.Level InstallDate --- --- --- --- --- char-hpcru 5.0.2.21-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 char-hpilo 500.9.0.0.9-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-ams 500.9.2.0-11.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-build 5.34.23-434156 Hewlett-Packard PartnerSupported 2013-04-05 hp-smx-provider 500.03.01.00.5-434156 Hewlett-Packard VMwareAccepted 2013-04-12 scsi-hpsa 5.0.0-40OEM.500.0.0.472560 Hewlett-Packard VMwareCertified 2013-04-05 scsi-hpvsa 5.0.0-50OEM.500.0.0.472560 Hewlett-Packard PartnerSupported 2013-04-05 vmware-esx-hp_vaaip_p2000 2.1.0-2 Hewlett-Packard VMwareAccepted 2013-04-05 ata-pata-hpt3x2n 0.3.4-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05

~ #

(6)

Page 14 of 35 2013-04-12

~ # esxcli software vib list

Name Version Vendor Accept. Level Install Date --- --- --- --- --- misc-cnic-register 1.72.1.v50.2-1OEM.500.0.0.472560 Broadcom VMwareCertified 2013-04-05 net-bnx2 2.2.3e.v50.1-1OEM.500.0.0.472560 Broadcom VMwareCertified 2013-04-05 net-bnx2x 1.74.17.v50.1-1OEM.500.0.0.472560 Broadcom VMwareCertified 2013-04-05 net-cnic 1.74.04.v50.1-1OEM.500.0.0.472560 Broadcom VMwareCertified 2013-04-05 net-tg3 3.124c.v50.1-1OEM.500.0.0.472560 Broadcom VMwareCertified 2013-04-05 scsi-bnx2fc 1.74.02.v50.2-1OEM.500.0.0.406165 Broadcom VMwareCertified 2013-04-05 scsi-bnx2i 2.74.07.v50.1-1OEM.500.0.0.472560 Broadcom VMwareCertified 2013-04-05 scsi-bfa 3.0.0.0-1OEM.500.0.0.406165 Brocade VMwareCertified 2013-04-05 ima-be2iscsi 4.2.324.12-1OEM.500.0.0.472629 Emulex VMwareCertified 2013-04-05 net-be2net 4.2.327.0-1OEM.500.0.0.472560 Emulex VMwareCertified 2013-04-05 scsi-be2iscsi 4.2.324.12-1OEM.500.0.0.472629 Emulex VMwareCertified 2013-04-05 scsi-lpfc820 8.2.4.141.55-1OEM.500.0.0.472560 Emulex VMwareCertified 2013-04-05 char-hpcru 5.0.2.21-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 char-hpilo 500.9.0.0.9-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-ams 500.9.2.0-11.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-build 5.34.23-434156 Hewlett-Packard PartnerSupported 2013-04-05 hp-smx-provider 500.03.01.00.5-434156 Hewlett-Packard VMwareAccepted 2013-04-12 scsi-hpsa 5.0.0-40OEM.500.0.0.472560 Hewlett-Packard VMwareCertified 2013-04-05 scsi-hpvsa 5.0.0-50OEM.500.0.0.472560 Hewlett-Packard PartnerSupported 2013-04-05 vmware-esx-hp_vaaip_p2000 2.1.0-2 Hewlett-Packard VMwareAccepted 2013-04-05 net-igb 4.0.17-1OEM.500.0.0.472560 Intel VMwareCertified 2013-04-05 net-ixgbe 3.11.32-1OEM.500.0.0.472560 Intel VMwareCertified 2013-04-05 scsi-mpt2sas 13.10.02.00.1vmw-1OEM.500.0.0.472560 LSI VMwareCertified 2013-04-05 net-mlx4-en 1.6.1.2-1OEM.500.0.0.406165 Mellanox VMwareCertified 2013-04-05 ima-qla4xxx 500.2.01.31-1vmw.0.0.060523 QLogic VMwareCertified 2013-04-05 net-qlcnic 5.0.750-1OEM.500.0.0.472560 QLogic VMwareCertified 2013-04-05 scsi-qla4xxx 634.0.5.0-1OEM.500.0.0.472560 QLogic VMwareCertified 2013-04-05 ata-pata-amd 0.3.10-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ata-pata-atiixp 0.4.6-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ata-pata-cmd64x 0.2.5-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ata-pata-hpt3x2n 0.3.4-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ata-pata-pdc2027x 1.0-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ata-pata-serverworks 0.4.3-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ata-pata-sil680 0.4.8-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ata-pata-via 0.3.3-2vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 block-cciss 3.6.14-10vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ehci-ehci-hcd 1.0-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 esx-base 5.1.0-0.0.799733 VMware VMwareCertified 2013-04-05 esx-dvfilter-generic-fastpath 5.1.0-0.0.799733 VMware VMwareCertified 2013-04-05 esx-tboot 5.1.0-0.0.799733 VMware VMwareCertified 2013-04-05 esx-xlibs 5.1.0-0.0.799733 VMware VMwareCertified 2013-04-05 esx-xserver 5.1.0-0.0.799733 VMware VMwareCertified 2013-04-05 ipmi-ipmi-devintf 39.1-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ipmi-ipmi-msghandler 39.1-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ipmi-ipmi-si-drv 39.1-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 misc-drivers 5.1.0-0.0.799733 VMware VMwareCertified 2013-04-05 net-e1000 8.0.3.1-2vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 net-e1000e 1.1.2-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 net-enic 1.4.2.15a-1vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 net-forcedeth 0.61-2vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 net-nx-nic 5.0.626-3vmw.500.0.0.472560 VMware VMwareCertified 2013-04-05 net-r8168 8.013.00-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 net-r8169 6.011.00-2vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 net-s2io 2.1.4.13427-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05

(7)

Page 15 of 35 2013-04-12 net-sky2 1.20-2vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 net-vmxnet3 1.1.3.0-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 ohci-usb-ohci 1.0-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 sata-ahci 3.0-13vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 sata-ata-piix 2.12-6vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 sata-sata-nv 3.5-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 sata-sata-promise 2.12-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 sata-sata-sil24 1.1-1vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 sata-sata-sil 2.3-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 sata-sata-svw 2.3-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-aacraid 1.1.5.1-9vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-adp94xx 1.0.8.12-6vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-aic79xx 3.1-5vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-fnic 1.5.0.3-1vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-ips 7.12.05-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-megaraid-mbox 2.20.5.1-6vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-megaraid-sas 5.34-4vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-megaraid2 2.00.4-9vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-mptsas 4.23.01.00-6vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-mptspi 4.23.01.00-6vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 scsi-rste 2.0.2.0088-1vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 uhci-usb-uhci 1.0-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 tools-light 5.1.0-0.0.799733 VMware VMwareCertified 2013-04-05 scsi-qla2xxx 934.5.6.0-1OEM.500.0.0.472560 qlogic VMwareCertified 2013-04-05

~ #

(8)

Page 16 of 35 2013-04-12

6.3 Reboot RN-SV-05

Konfiguration – Speicher – Smart Array : Die Warnung ist verschwunden!

6.3.1 Aber: der RN-VM-Win2012 Server macht immer noch ein reboot alle paar

Minuten:

(9)

Page 17 of 35 2013-04-12

6.3.2 Und die WinXP Server können nach wie vor nicht hoch gefahren werden, Fehlermeldung unverändert wie vorher:

6.4 Neuer Eintrag in Community Diskussion Upgrading ESXi 5.0 to ESXi 5.1 HP Smart Array P410i Warning

3. 12.04.2013 07:32 als Antwort auf: peove

Re: Upgrading ESXi 5.0 to ESXi 5.1 HP Smart Array P410i Warning

6.5 Brack Tech Support Hotline

6.6 HP business Support

Problem bekannt und in Bearbeitung.

Empfehlung für Workaround: install the HP ESXi Complete Bundle 1.5 Wurde aber zurückgezogen -> Install bundle 1.4

http://h18004.www1.hp.com/products/servers/software/vmware-esxi/driver_version.html 6.6.1.1 Issue

If customer used the old HP Image before the 09.02.2013 and applied the HP ESXi 5.0 Complete Bundle 1.6 or used the latest HP Customer ISO Image of the 5.1 for installation/upgrade after the

09.02.2013 the issue will appear.

6.6.1.2 (recommended) Solution

There is only an workaround so far is to run the commands:

~ # esxcli software vib list | grep -i hp

char-hpcru 5.0.3.09-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-01-30 char-hpilo 500.9.0.0.9-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-01-30 hp-ams 500.9.3.0-13.434156 Hewlett-Packard PartnerSupported 2013-02-20 hp-build 5.30.28-434156 Hewlett-Packard PartnerSupported 2012-10-02 hp-esx-license 1.0-05 Hewlett-Packard PartnerSupported 2012-10-02 hp-smx-provider 500.03.02.00.23-434156 Hewlett-Packard VMwareAccepted 2013-02-20 hpacucli 9.40-12.0 Hewlett-Packard PartnerSupported 2013-02-20

(10)

Page 18 of 35 2013-04-12 hpbootcfg 01-01.02 Hewlett-Packard PartnerSupported 2013-01-30

hponcfg 04-00.10 Hewlett-Packard PartnerSupported 2013-01-30 scsi-hpsa 5.0.0-28OEM.500.0.0.472560 Hewlett-Packard VMwareCertified 2012-10-02 scsi-hpvsa 5.0.0-36OEM.500.0.0.472560 Hewlett-Packard PartnerSupported 2012-10-02 vmware-esx-hp_vaaip_p2000 2.1.0-2 Hewlett-Packard VMwareAccepted 2012-10-02 ata-pata-hpt3x2n 0.3.4-3vmw.510.0.0.799733 VMware VMwareCertified 2012-10-02 hpnmi 2.0.11-434156 hp PartnerSupported 2013-01-30

~ # esxcli software vib remove -n char-hpcru --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_char-hpcru_5.0.3.09-1OEM.500.0.0.434156 VIBs Skipped:

~ # esxcli software vib remove -n char-hpilo --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156 VIBs Skipped:

~ # esxcli software vib remove -n hp-ams --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hp-ams_500.9.3.0-13.434156 VIBs Skipped:

~ # esxcli software vib remove -n hpacucli --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hpacucli_9.40-12.0 VIBs Skipped:

~ # esxcli software vib remove -n hpbootcfg --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hpbootcfg_01-01.02 VIBs Skipped:

~ # esxcli software vib remove -n hpnmi --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true

(11)

Page 19 of 35 2013-04-12 VIBs Installed:

VIBs Removed: hp_bootbank_hpnmi_2.0.11-434156 VIBs Skipped:

~ # esxcli software vib remove -n hponcfg --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hponcfg_04-00.10 VIBs Skipped:

~ # esxcli software vib remove -n hp-smx-provider --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hp-smx-provider_500.03.02.00.23-434156 VIBs Skipped:

~ #

Once this is been done, you need to install the HP ESXi Complete Bundle 1.5 and reboot.

Leider scheint das Buendel 1.5 zurueckgezogen zu sein. Ich konnte nur 1.4 finden – oben rechts finden Sie es http://h18004.www1.hp.com/products/servers/software/vmware-esxi/driver_version.html

Once this is been done, get the host of the maintenance mode and the status will be back green again. Currently L2 ISS investigating the issue.

Asen Stoyanov

Remote Support Engineer I

Industry-Standard Server Support HP Customer Solution Center Sofia

asens@hp.com

Hewlett-Packard Company

Business Park Sofia, Building 8 Sofia, 1766

Bulgaria

(12)

Page 20 of 35 2013-04-12

6.6.1.3 Workaround execution log

~ # esxcli software vib list | grep -i hp

char-hpcru 5.0.2.21-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 char-hpilo 500.9.0.0.9-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-ams 500.9.2.0-11.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-build 5.34.23-434156 Hewlett-Packard PartnerSupported 2013-04-05 hp-smx-provider 500.03.01.00.5-434156 Hewlett-Packard VMwareAccepted 2013-04-12 scsi-hpsa 5.0.0-40OEM.500.0.0.472560 Hewlett-Packard VMwareCertified 2013-04-05 scsi-hpvsa 5.0.0-50OEM.500.0.0.472560 Hewlett-Packard PartnerSupported 2013-04-05 vmware-esx-hp_vaaip_p2000 2.1.0-2 Hewlett-Packard VMwareAccepted 2013-04-05 ata-pata-hpt3x2n 0.3.4-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05

~ # esxcli software vib remove -n char-hpcru --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_char-hpcru_5.0.2.21-1OEM.500.0.0.434156 VIBs Skipped:

~ # esxcli software vib remove -n char-hpilo --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156 VIBs Skipped:

~ # esxcli software vib remove -n hp-ams --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hp-ams_500.9.2.0-11.434156 VIBs Skipped:

(13)

Page 21 of 35 2013-04-12

~ # esxcli software vib remove -n hpacucli --no-live-install [NoMatchError]

No VIB matching VIB search specification 'hpacucli'.

Please refer to the log file for more details.

 schon bei Schritt 6.2.4 gelöscht!

~ # esxcli software vib remove -n hpbootcfg --no-live-install [NoMatchError]

No VIB matching VIB search specification 'hpbootcfg'.

Please refer to the log file for more details.

~ # esxcli software vib remove -n hpnmi --no-live-install [NoMatchError]

No VIB matching VIB search specification 'hpnmi'.

Please refer to the log file for more details.

~ # esxcli software vib remove -n hponcfg --no-live-install [NoMatchError]

No VIB matching VIB search specification 'hponcfg'.

Please refer to the log file for more details.

~ # esxcli software vib remove -n hp-smx-provider --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hp-smx-provider_500.03.01.00.5-434156 VIBs Skipped:

~ #

~ # cd /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/hp-esxi5.0uX-bundle-1.4-16/

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/hp-esxi5.0uX-bundle-1.4-16 # esxcli software vib install -d hp-esxi5.0uX-bundle-1.4-16.zip

[MetadataDownloadError]

Could not download from depot at zip:/var/log/vmware/hp-esxi5.0uX-bundle-1.4-16.zip?index.xml, skipping (('zip:/var/log/vmware/hp-esxi5.0uX-bundle-1.4-16.zip?index.xml', '', "Error extracting index.xml from /var/log/vmware/hp-esxi5.0uX-bundle-1.4-16.zip: [Errno 2] No such file or directory:

'/var/log/vmware/hp-esxi5.0uX-bundle-1.4-16.zip'"))

url = zip:/var/log/vmware/hp-esxi5.0uX-bundle-1.4-16.zip?index.xml Please refer to the log file for more details.

 nicht ins Depot Verzeichnis wechseln, dafür Pfad beim Depot mitgeben!

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/hp-esxi5.0uX-bundle-1.4-16 # cd /

~ #

~ # esxcli software vib install -d /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/- hp-esxi5.0uX-bundle-1.4-16/hp-esxi5.0uX-bundle-1.4-16.zip

Installation Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true

VIBs Installed: Hewlett-Packard_bootbank_char-hpcru_5.0.3.09-1OEM.500.0.0.434156, Hewlett-Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156, Hewlett-Packard_bootbank_hp-ams_500.9.3.0-13.434156,

Hewlett-Packard_bootbank_hp-smx-provider_500.03.02.00.23-434156 VIBs Removed:

VIBs Skipped:

~ #

(14)

Page 22 of 35 2013-04-12

6.6.1.4 Zusätzlich Installation hp-nmi-2.0 - Version 500.2.0.11-434156

~ # esxcli software vib install -d /vmfs/volumes/50fdc63e-3da28ca5-2df5- e4115be23b79/HPdriverPack/hp-nmi-esxi5.0-bundle-2.1-2.zip

Installation Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true

VIBs Installed: hp_bootbank_hpnmi_2.0.11-434156 VIBs Removed:

VIBs Skipped:

~ # reboot

6.6.1.5 Ergebnis

Konfigurationswarnung ist wieder da!!!

und keine Behebung des Disk Zugriffsproblems,

(15)

Page 23 of 35 2013-04-12

6.6.2 aber nach absenden des Fehlerberichtes neuer Hinweis auf Knowledge Base (2036572)

Powering on a virtual machine after upgrading to ESXi 5.1 fails with the error:

File [VMFS volume] VM-name/VM-name.vmdk was not found (2036572)

6.6.2.1 Remove hpnmi

~ # esxcli software vib list | grep -i hp

char-hpcru 5.0.3.09-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 char-hpilo 500.9.0.0.9-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-ams 500.9.3.0-13.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-build 5.34.23-434156 Hewlett-Packard PartnerSupported 2013-04-05 hp-smx-provider 500.03.02.00.23-434156 Hewlett-Packard VMwareAccepted 2013-04-12 scsi-hpsa 5.0.0-40OEM.500.0.0.472560 Hewlett-Packard VMwareCertified 2013-04-05 scsi-hpvsa 5.0.0-50OEM.500.0.0.472560 Hewlett-Packard PartnerSupported 2013-04-05 vmware-esx-hp_vaaip_p2000 2.1.0-2 Hewlett-Packard VMwareAccepted 2013-04-05 ata-pata-hpt3x2n 0.3.4-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05 hpnmi 2.0.11-434156 hp PartnerSupported 2013-04-12

~ # esxcli software vib remove -n hpnmi --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: hp_bootbank_hpnmi_2.0.11-434156 VIBs Skipped:

~ # reboot

VM bootfehler vorhanden

Disk/Speicher Warnung immer noch vorhanden

(16)

Page 24 of 35 2013-04-12

6.6.2.2 Behebung Knowledge Base issue (2036572): File [VMFS volume] VM-name/VM- name.vmdk was not found

3. Check if any of your virtual machine disks are of a hosted type. Hosted disks end with the

-s00x.vmdk

extension.

(17)

Page 25 of 35 2013-04-12

To load the vmkernel multiextent module:

1. Open a console to the ESXi host.

2. Run this command to load the multiextent module:

# vmkload_mod multiextent

~ # vmkload_mod multiextent

Module multiextent loaded successfully

3. Check if any of your virtual machine disks are of a hosted type. Hosted disks end with the

-s00x.vmdk

extension.

/vmfs/volumes # cd RN-SV-05.LUN1

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79 # ls

HPdriverPack VM Windows XP HE-HPprobook WinXP-gigabyte template-VMs Trial-Linux VM-DOS-50 Windows XP Professional trash Trial-Win VM-Win2000 hot-VMs w7un309.pantec.local

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79 # cd Windows\ XP\ Professional/

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # ls Windows XP Professional-s001.vmdk Windows XP Professional.vmxf vmware-3.log Windows XP Professional.nvram autoinst.flp vmware-4.log Windows XP Professional.vmdk vmware-0.log vmware-5.log Windows XP Professional.vmsd vmware-1.log vmware.log Windows XP Professional.vmx vmware-2.log

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional #

4. Convert virtual disks in hosted format to one of the VMFS formats.

To convert virtual disks in hosted format to one of the VMFS formats:

a. Clone source hosted disk to a new disk using the command:

# vmkfstools -i VM-name.vmdk <VM-name-new-disk>.vmdk -d zeroedthick

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # vmkfstools -i Windows\

XP\ Professional-s001.vmdk Windows\ XP\ Professional-nonHosted.vmdk -d zeroedthick Destination disk format: VMFS zeroedthick

Cloning disk 'Windows XP Professional-s001.vmdk'...

Clone: 100% done.

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # # /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # ls Windows XP Professional-nonHosted-flat.vmdk autoinst.flp

Windows XP Professional-nonHosted.vmdk vmware-0.log

(18)

Page 26 of 35 2013-04-12 Windows XP Professional-s001.vmdk vmware-1.log

Windows XP Professional.nvram vmware-2.log Windows XP Professional.vmdk vmware-3.log Windows XP Professional.vmsd vmware-4.log Windows XP Professional.vmx vmware-5.log Windows XP Professional.vmxf vmware.log

b. Delete the hosted disk after successful cloning using the command:

# vmkfstools -U VM-name.vmdk

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # vmkfstools -U Windows\

XP\ Professional-s001.vmdk

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # ls Windows XP Professional-nonHosted-flat.vmdk vmware-0.log

Windows XP Professional-nonHosted.vmdk vmware-1.log

……

c. Rename the cloned VMFS type new disk to the original disk name using the command:

# vmkfstools -E VM-name-new-disk.vmdk VM-name.vmdk

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # vmkfstools -E Windows\

XP\ Professional-nonHosted.vmdk Windows\ XP\ Professional-s001.vmdk

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # ls Windows XP Professional-s001-flat.vmdk vmware-0.log

Windows XP Professional-s001.vmdk vmware-1.log

…………

5. Run this command to unload the multiextent module:

# vmkload_mod -u multiextent

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/Windows XP Professional # vmkload_mod -u multiextent

Module multiextent successfully unloaded

How do I know which modules are loaded?

To determine which modules are loaded, run this command:

# esxcfg-module –l

6.6.3 Downgrade again to hp-esxi5.0uX-bundle-1.3-12

~ # esxcli software vib remove -n char-hpcru --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_char-hpcru_5.0.3.09-1OEM.500.0.0.434156 VIBs Skipped:

~ # esxcli software vib remove -n char-hpilo --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

(19)

Page 27 of 35 2013-04-12 VIBs Removed: Hewlett-Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156

VIBs Skipped:

~ # esxcli software vib remove -n hp-ams --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hp-ams_500.9.3.0-13.434156 VIBs Skipped:

~ # esxcli software vib remove -n hp-smx-provider --no-live-install Removal Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true VIBs Installed:

VIBs Removed: Hewlett-Packard_bootbank_hp-smx-provider_500.03.02.00.23-434156 VIBs Skipped:

~ #

~ # esxcli software vib install -d /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/- HPdriverPack/hp-esxi5.0uX-bundle-1.3-12/hp-esxi5.0uX-bundle-1.3-12.zip

Installation Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true

VIBs Installed: Hewlett-Packard_bootbank_char-hpcru_5.0.2.21-1OEM.500.0.0.434156, Hewlett- Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156, Hewlett-Packard_bootbank_hp- ams_500.9.2.0-11.434156, Hewlett-Packard_bootbank_hp-smx-provider_500.03.01.00.5-434156

VIBs Removed:

VIBs Skipped:

~ #

(20)

Page 28 of 35 2013-04-12

Status Quo

(21)

Page 29 of 35 2013-04-12

7 E IGENSCHAFTEN S PEICHER R ESSOURCEN ( V S PHERE )

Warum LUN2 mit VMFS 3.54 und nicht auch mit VMFS 5.54?

(22)

Page 30 of 35 2013-04-12

Die Festplatte '/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/hot-VMs/RN-VM- Polarion/vm_WinXPpro-000004.vmdk' oder eine der Snapshot-Festplatten, auf die sie angewiesen ist, konnte nicht geöffnet werden. Das System kann die angegebene Datei nicht finden.

VMware ESX kann die virtuelle Festplatte '/vmfs/volumes/50fdc63e-3da28ca5-2df5- e4115be23b79/hot-VMs/RN-VM-Polarion/vm_WinXPpro-000004.vmdk' nicht finden.

/vmfs/volumes # pwd /vmfs/volumes /vmfs/volumes # ls

057dee7a-0c8257d6-619d-000a4b76aa7b 50fdd602-16227991-13b6-e4115be23b79 RN-SV-05.LUN2

50fdc627-fb6dc395-cd1c-e4115be23b79 515f4541-af12018e-3479-e4115be23b78 cc923b7a-e027e7fc-18ae-cd3d74114652 50fdc63e-3da28ca5-2df5-e4115be23b79 RN-SV-05.LUN1

/vmfs/volumes # cd RN-SV-05.LUN1

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79 #

# cd ../RN-SV-05.LUN2

/vmfs/volumes/50fdd602-16227991-13b6-e4115be23b79 #

Keine –s00x.vmdk im vSphere Browser sichtbar!

Aber auf Konsole und nach download auf Backup-Client:

/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/hot-VMs/RN-VM-Claudio # ls vm_WinXPpro-000001-s001.vmdk vm_WinXPpro-0b01bc72.hlog vm_WinXPpro.vmx vm_WinXPpro-000001-s002.vmdk vm_WinXPpro-Snapshot1.vmsn vm_WinXPpro.vmxf vm_WinXPpro-000001-s003.vmdk vm_WinXPpro-Snapshot2.vmsn vmware-33.log vm_WinXPpro-000001-s004.vmdk vm_WinXPpro-s001.vmdk vmware-34.log vm_WinXPpro-000001.vmdk vm_WinXPpro-s002.vmdk vmware-35.log vm_WinXPpro-000002-s001.vmdk vm_WinXPpro-s003.vmdk vmware-36.log vm_WinXPpro-000002-s002.vmdk vm_WinXPpro-s004.vmdk vmware-37.log vm_WinXPpro-000002-s003.vmdk vm_WinXPpro.nvram vmware-38.log vm_WinXPpro-000002-s004.vmdk vm_WinXPpro.vmdk vmware.log vm_WinXPpro-000002.vmdk vm_WinXPpro.vmsd

(23)

Page 31 of 35 2013-04-12 /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/hot-VMs/RN-VM-Claudio #

….

(24)

Page 32 of 35 2013-04-12

8 V ERSCHIEBEN DER VM’ S AUF LUN2

Start RN-SV-Claudio

Fehler bleibt auch auf anderem LUN gleich  es liegt nicht am LUN

(25)

Page 33 of 35 2013-04-12

(26)

Page 34 of 35 2013-04-12

9 R ECOMMENDATIONS FROM VM WARE C OMMUNITY

Re: Upgrading ESXi 5.0 to ESXi 5.1 HP Smart Array P410i Warning The latest HP Offline Bundle fixes the issues with the hardware status warning http://vibsdepot.hp.com/hpq/apr2013/

http://www.jonmunday.net/2013/04/16/fix-hp-esxi-5-x-management-bundles/

~ # esxcli software vib list >/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/vib- list.before.txt

~ #

~ # esxcli software vib install -d /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/- hp-esxi5.0uX-bundle-1.4.5-3.zip

Installation Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true

VIBs Installed: Hewlett-Packard_bootbank_char-hpcru_5.0.3.09-1OEM.500.0.0.434156, Hewlett-Packard_bootbank_hp-ams_500.9.3.5-02.434156,

Hewlett-Packard_bootbank_hp-smx-provider_500.03.02.10.4-434156

(27)

Page 35 of 35 2013-04-12 VIBs Removed: Hewlett-Packard_bootbank_char-hpcru_5.0.2.21-1OEM.500.0.0.434156,

Hewlett-Packard_bootbank_hp-ams_500.9.2.0-11.434156,

Hewlett-Packard_bootbank_hp-smx-provider_500.03.01.00.5-434156 VIBs Skipped: Hewlett-Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156

~ # esxcli software vib install -d /vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/- hp-ams-esxi5.0-bundle-9.3.5-3.zip

Installation Result

Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.

Reboot Required: true

VIBs Installed: Hewlett-Packard_bootbank_hp-smx-limited_500.03.02.10.3-434156 VIBs Removed: Hewlett-Packard_bootbank_hp-smx-provider_500.03.02.10.4-434156 VIBs Skipped: Hewlett-Packard_bootbank_char-hpcru_5.0.3.09-1OEM.500.0.0.434156, Hewlett-Packard_bootbank_char-hpilo_500.9.0.0.9-1OEM.500.0.0.434156, Hewlett-Packard_bootbank_hp-ams_500.9.3.5-02.434156

~ # reboot

~ #

~ # esxcli software vib list >/vmfs/volumes/50fdc63e-3da28ca5-2df5-e4115be23b79/HPdriverPack/vib- list.after.txt

~ #

~ # esxcli software vib list | grep -i hp

char-hpcru 5.0.3.09-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-16 char-hpilo 500.9.0.0.9-1OEM.500.0.0.434156 Hewlett-Packard PartnerSupported 2013-04-12 hp-ams 500.9.3.5-02.434156 Hewlett-Packard PartnerSupported 2013-04-16 hp-build 5.34.23-434156 Hewlett-Packard PartnerSupported 2013-04-05 hp-smx-limited 500.03.02.10.3-434156 Hewlett-Packard VMwareAccepted 2013-04-16 scsi-hpsa 5.0.0-40OEM.500.0.0.472560 Hewlett-Packard VMwareCertified 2013-04-05 scsi-hpvsa 5.0.0-50OEM.500.0.0.472560 Hewlett-Packard PartnerSupported 2013-04-05 vmware-esx-hp_vaaip_p2000 2.1.0-2 Hewlett-Packard VMwareAccepted 2013-04-05 ata-pata-hpt3x2n 0.3.4-3vmw.510.0.0.799733 VMware VMwareCertified 2013-04-05

~ #

 keine driver Warning

Aber immer noch vmdk load Problem wie vorher.

Referenzen

ÄHNLICHE DOKUMENTE

Als Ziel einer Linux VM Migration kann ausschließlich ein verwaltetes System genutzt werden – VMware vCenter oder ein ESXi Host sein –

Sie können vCenter Server für das OMIVV Gerät mit vCenter Administrator-Anmeldeinformationen für den vCenter Server oder mit einem Benutzer mit den erforderlichen

Wenn der verwendete Speicherplatz über dem Schwellenwert für die Host-Neuerstellung liegt und der Host ausfällt, wird vSAN möglicherweise nicht alle Daten vom fehlgeschlagenen

4-3: Montieren Sie die Rückenverstellung (8) am Rahmen für das Rückenpolster (14) mit einer M12x95 Sechskantschraube (98), zwei Unterlegscheiben (87) und einer

VORSICHT! Führen Sie den Wechsel des Türanschlags mit mindestens zwei Personen durch, weil Sie ansonsten das Gerät beschädigen oder der Person, die an dem Gerät

Sie können vSphere Auto Deploy verwenden, um einen Host mit einem neuen Image-Profil unter Verwendung des vSphere Client bereitzustellen, indem Sie die Regel für den Host ändern

Zum Erstellen von weiteren Knoten in einem Cluster von virtuellen Maschinen auf mehreren physischen Hosts müssen Sie eine Vorlage der ersten virtuellen Maschine erstellen und diese

stem does not extend 2. Replace actuator AIT-U sensor Valve does not open: 1. Dismount actuator AIT-U Temperature trim dirty or damaged 2.Unscrew trim.. FRANCAIS.