The company has a specialized workshop for production of nonstandard products.

(1)

1 Прозорецът на бъдещето.

Ново поколение прозорци

КАЧЕСТВО БЕЗ КОМПРОМИСИ:

Енергийна ефективност, Защита от атмосферни влияния, Опазване на околната среда, Дълъг живот

Flyer_2-seiter:Layout 1 29.09.2009 12:43 Uhr Seite 1

(2)

(3)

3

(4)

As well as the implementation of any kind of standard opening systems including:

“Harmonica” - guaranteeing 100% opening, Lift&Slide - lifting with sliding, VW - pull out with sliding sideways The company has a specialized workshop for production of nonstandard products.

Bamboo blinds

We offer you also bamboo blinds from natural material which we produce according to a specific size for your needs.

PVC products

We offer you a diverse range of finished PVC products from the brands:

Salamander, Mig Market Pro 80, Profilink, Reiner Plast..

Aluminum products

Also aluminum products from the following systems: Cortizo, Mig Market Aluminum

(5)

5

Nachweis Energieeinsparung und Wärmeschutz Prüfbericht 432 26905/1

03-05/409

Grundlagen ift-Richtlinie WA-02/1 Juli 2002

„Verfahren zur Ermittlung von Uf-Werten für Kunststoffprofile aus Fenstersystemen“

prEN ISO 10077-2 : 1998-11 Berechnung des Wärmedurch- gangskoeffizienten Uf Numeri- sches Verfahren für Rahmen prEN 12412-2 : 1997-10 Bestimmung des Wärmedurch- gangskoeffizienten mittels des Heizkastenverfahrens, Teil 2:

Rahmen Entspricht den nationalen Fas- sungen E DIN EN sowie E DIN EN ISO.

Darstellung siehe Anlage 2 Verwendungshinweise Dieser Prüfbericht dient zum Nachweis des Wärmedurch- gangskoeffizienten Uf für das geprüfte Profilsystem.

Gültigkeit Die genannten Daten und Er- gebnisse beziehen sich aus- schließlich auf das geprüfte und beschriebene Profilsystem. Die der Prüfung zugrunde liegenden Verfahren basieren auf Normentwürfen. Bis zur End- fassung der Norm können sich Änderungen ergeben, welche die Mess- bzw. Rechenergeb- nisse beeinflussen.

Die Ermittlung des Wärme- durchgangskoeffizienten er- möglicht keine Aussage über weitere leistungs- und quali- tätsbestimmenden Eigenschaf- ten der vorliegenden Konstruk- tion.

Veröffentlichungshinweise Es gilt das ift-Merkblatt „Hin- weise zur Benutzung von ift- Prüfberichten“.

Das Deckblatt kann als Kurz- fassung verwendet werden.

Inhalt Der Nachweis umfasst insgesamt 12 Seiten 1 Gegenstand 2 Durchführung 3 Einzelergebnisse Anlage 1 (2 Seiten) Anlage 2 (2 Seiten) Auftraggeber Salamander Industrie-Produkte GmbH

Jakob-Sigle-Str. 58 86842 Türkheim

Produkt Flügel-Blendrahmen-Profilkombination Bezeichnung Streamline SL 76

Bautiefe Bautiefe Blendrahmen 76 mm Bautiefe Flügelrahmen 76-82 mm Ansichtsbreite Ansichtsbreite ist variabel

Material PVC-U/weiß Aussteifung Stahl / verzinkt Besonderheiten -/-

Wärmedurchgangskoeffizient Uf = 1,3 W/(m²· K)

ift Rosenheim 8. Juli 2003

i. V. Ulrich Sieberath

Stv. Institutsleiter i. V. Norbert Sack

Leiter Prüffeld Bauphysik

Salamander - BluEvolution

BluEvolution is profile system of a new generation combining innovative and conventional technology.

TECHNICAL PARAMETERS

• Construction width - 92 mm

• Number of chambers - 6

• Glazing - up to 60mm, allowing the use of three glass panes with different thicknesses

• Rubber gaskets on three levels

• Heat transfer coefficient - 1.0 W/m²K

• Extremely high sound reduction index - above 47 dB MAIN ADVANTAGES

• Manufactured only in Germany according to the German quality standard RAL GZ - 716;

• Profiles of Class A according to the European Standard EN 12608:2003;

• Extremely long life span - 60+ years;

• Light-resistant and highly resistant to weathering;

• Brilliant white color and shiny surface;

• Possibility of unilateral or bilateral foiling in a wide range of colors: 1600 colors according to RAL palette, including 12 standard imitations of wood;

• 100% recyclable and excellent eco-balance;

• IMPORTANT: The system is exceptionally suitable for building of passive houses

Nachweis W ä r m ed urc h g an gsk o e ff iz ie nt P r ü f b e ri ch t N r . 1 1- 000 2 12 - P R 01 ( P B - A 0 1 - 0 6 - d e - 0 1 )

07-09 / 389

Grundlagen EN ISO 10077-1 : 2006-09 Wärmetechnisches Verhalten von Fenstern, Türen und Ab- schlüssen - Berechnung des Wärmedurchgangskoeffizienten – Teil 1:Vereinfachtes Verfah- ren EN ISO 10077-2 : 2003-10 Wärmetechnisches Verhalten von Fenstern, Türen und Ab- schlüssen - Berechnung des Wärmedurchgangs- koeffizienten - Teil 2: Numeri- sches Verfahren für Rahmen ift-Prüfbericht 402 38875/4 vom 18.09.2009 Darstellung

Verwendungshinweise Dieser Prüfbericht dient zum Nachweis des Wärmedurch- gangskoeffizientenUW. Gültigkeit Die genannten Daten und Er- gebnisse beziehen sich aus- schließlich auf den geprüften und beschriebenen Gegen- stand.

Die Prüfung des Wärmedurch- gangskoeffizienten ermöglicht keine Aussage über weitere leistungs- und qualitätsbestim- mende Eigenschaften der vorliegenden Konstruktion.

Veröffentlichungshinweise Es gilt das ift-Merkblatt „Bedin- gungen und Hinweise zur Be- nutzung von ift- Prüfdokumentationen“.

Inhalt Der Nachweis umfasst insgesamt 9 Seiten 1 Gegenstand 2 Durchführung 3 Einzelergebnisse Anlage 1 Auftraggeber

Salamander Industrie-Produkte GmbH Jakob-Sigle-Str. 58 86842 Türkheim Produkteinflügeliges Drehkippfenster BezeichnungbluEvolution Außenmaß (B x H)1230 mm x 1480 mm

Öffnungsart Drehkipp (Rahmen) Ansichtsbreite 118 mm

(Rahmen) Material

Kunststoff-Hohlkammerprofile mit thermisch getrennten Stahlaussteifungen, PVC-hart Thermische Trennung in Aussteifung

Material: Polyurethan Wärmeleitfähigkeit in W/(m  K): 0,25 Verglasung

Mehrscheiben-Isolierglas: Aufbau: 4/18/4/18/4, Ug-Wert von 0,5 W/(m2 K) (Angabe des Auftraggebers) FüllungDicke: 48 mm

Einbautiefe: 17 mm Abstandhalter

Wärmetechnisch verbesserter Abstandhalter nach EN ISO 10077-1, berechnet nach Two-Box-Modell Besonderheiten--

Wärmedurchgangskoeffizient UW = 0,77 W/(m² K)

Dr. Joachim Hessinger, Dipl.-Phys.

Prüfstellenleiter Bauphysik

Horst Kellermann, Dipl. Phys.

Laborleiter Rechnergestützte Simulation

Nachweis W ä r m ed ur c h g an gsk o e ff iz ie nt P r ü f b e ri ch t N r . 1 1- 000 2 12 - P R 02 ( P B - A 0 1 - 0 6 - d e - 0 1 )

07-09 / 389

Auftraggeber Salamander Industrie-Produkte GmbH Jakob-Sigle-Str. 58 86842 Türkheim

Grundlagen EN ISO 10077-1 : 2006-09 Wärmetechnisches Verhalten von Fenstern, Türen und Ab- schlüssen - Berechnung des Wärmedurchgangskoeffizienten – Teil 1:Vereinfachtes Verfah- ren EN ISO 10077-2 : 2003-10 Wärmetechnisches Verhalten von Fenstern, Türen und Ab- schlüssen - Berechnung des Wärmedurchgangs- koeffizienten - Teil 2: Numeri- sches Verfahren für Rahmen ift-Richtlinie WA15/2 (Februar 2011) „Passivhaustauglichkeit von Fenstern, Türen und Fas- saden“

ift-Prüfbericht 11-000212-PR01 (PB-A01-06-de-01) vom 19.07.2011 Darstellung

Verwendungshinweise Dieser Prüfbericht dient zum Nachweis des Wärmedurch- gangskoeffizientenUW,Einbau. Gültigkeit Die genannten Daten und Er- gebnisse beziehen sich aus- schließlich auf den geprüften und beschriebenen Gegen- stand.

Die Prüfung des Wärmedurch- gangskoeffizienten ermöglicht keine Aussage über weitere leistungs- und qualitätsbestim- mende Eigenschaften der vorliegenden Konstruktion.

Veröffentlichungshinweise Es gilt das ift-Merkblatt „Bedin- gungen und Hinweise zur Be- nutzung von ift-Prüfdokumen- tationen“. Das Deckblatt kann als Kurzfassung verwendet werden.

Inhalt Der Nachweis umfasst insgesamt 11 Seiten.

Produkteinflügeliges Drehkippfenster BezeichnungbluEvolution

Außenmaß Fenster (B x H)Rohbaumaß 1230 mm x 1480 mm Einbau (B x H)1245 mm x 1508 mm Öffnungsart Drehkipp

(Rahmen) Material

Kunststoff-Hohlkammerprofile mit thermisch getrennten Stahlaussteifungen, PVC-hart Thermische Trennung in Aussteifung

Material: Polyurethan Wärmeleitfähigkeit in W/(m  K): 0,25 Verglasung

Mehrscheiben-Isolierglas: Aufbau: 4/18/4/18/4, Ug-Wert von 0,5 W/(m2 K) (Angabe des Auftraggebers) Abstandhalter

Wärmetechnisch verbesserter Abstandhalter nach EN ISO 10077-1, berechnet nach Two-Box-Modell

Einbau Außenputz 10 mm / Wärmedämmverbundsystem 300 mm / Mauerwerk 175 mm / Innenputz 15 mm (Wandaufbau nach ift-Richtlinie WA15/2) Wärmedurchgangskoeffizient

UW,Einbau = 0,82 W/(m² K)

Horst Kellermann, Dipl. Phys.

Laborleiter Rechnergestützte Simulation Nachweis

Passivhaustauglichkeit von Komponenten von Fenster P r ü f b e ri ch t

N r . 1 1- 000 2 12 - P R 03 ( P B - A0 1 - 0 6 - d e - 0 1 )

06-10 / 565

Grundlagen ift-Richtlinie WA15/2 (Februar 2011) „Passivhaustauglichkeit von Fenstern, Türen und Fas- saden“

EN 14351-1:2006 + A1:2010 Fenster und Türen - Produkt- norm, Leistungseigenschaften ift-Prüfberichte:

11-000212-PR01 (PB-A01-06- de-01) vom 29.07.2011 11-000212-PR02 (PB-A01-06- de-01) vom 29.07.2011 11-001246-PR02 (PB-A01- 0203-de-01) vom 25.07.2011 11-001246-PR03 (PB-A01-03- de-01) vom 25.07.2011 Verwendungshinweis Dieser Prüfbericht dient zum Nachweis der Leistungseigen- schaften gemäß oben genann- ter Richtlinie.

Die Werte / Klassen der weite- ren Leistungseigenschaften beziehen sich jeweils auf den in den Einzelnachweisen beschriebenen Gegenstand.

Für die Anwendung der Leis- tungseigenschaften gelten die nationalen baurechtlichen Be- stimmungen.

Gültigkeit Die genannten Daten und Er- gebnisse beziehen sich aus- schließlich auf den geprüften und beschriebenen Gegen- stand.

Die Prüfung der genannten Leistungseigenschaften er- möglicht keine Aussage über weitere leistungs- und quali- tätsbestimmende Eigenschaf- ten der vorliegenden Konstruk- tion.

Der Prüfbericht verliert seine Gültigkeit, wenn die Richtlinie oder die in den Grundlagen zi- tierten Dokumente ihre Gültig- keit verlieren.

Veröffentlichungshinweise Es gilt das ift-Merkblatt „Bedin- gungen und Hinweise zur Be- nutzung von ift- Prüfdokumentationen“.

Inhalt Der Nachweis umfasst insgesamt 5 Seiten:

1 Gegenstand 2 Durchführung 3 Leistungseigenschaften Auftraggeber Salamander

Industrie-Produkte GmbH Jakob-Sigle-Str. 58 86842 Türkheim Produkt Einflügeliges Drehkippfenster Bezeichnung bluEvolution Rahmenmaterial

Kunststoff-Hohlkammerprofile mit thermisch getrennten Stahlaussteifungen, PVC-hart Außenmaß Fenster (B x H) 1230 x 1480 mm

Leistungseigenschaften: Wärmedurchgang, Behaglichkeit, Temperaturfaktor (Hygiene)^*) (nach ift – Richtlinie WA 15/2: 2011-02)

Leistungseigen-schaften Uf = 0,94 W/(m² K), Ug = 0,5 W/(m² K) ≤ 0,7 W/(m² K) f 0,13 ≥ 0,88 mit fRsi = 1 – Rsi Uf UW = 0,77 W/(m2  K) ≤ 0,80 W/(m2  K) (bezogen auf ein repräsentatives Bezugselement mit der Abmessung 1230mm x 1480 mm, einer Verglasung mit Ug = 0,5 W/(m2  K) und dem Aufbau 4/18/4/18/4 mm und einem wärmetechnisch verbesserten Abstandhalterentsprechend den Vorgaben der EN ISO 10077-1) UW,Einbau = 0,82 W/(m2  K) ≤ 0,85 W/(m² K) ist erfüllt für das Wandsystem: o Monolithisches Mauerwerk mit Wärmdämmverbundsystem f

0,25/0,13 ≥ 0,73 erfüllt für die Baukörperanschlüsse an den genannten Wandaufbau f

0,20 ≥ 0,73 erfüllt für den Glasrandbereich Eigenschaften Widerstand

gegen Windlast Schlagregen- dichtheit Stoß- festigkeit Wärme- durchgang Luftdurch- lässigkeit

weitere Leistungs-eigenschaften Klasse / Wert C2 / B39A 5 siehe oben *)4 Weitere Leistungseigenschaften (nach EN 14531 Anhang ZA.1)

*) Objektbezogener Nachweis erforderlich

Manuel Demel, Dipl.-Ing. (FH) Prüfingenieur Rechnergestützte Simulation

PVC joinery, Salamander SL /Salamander streamline/.

• Construction width - 76 mm

• Number of chambers - 5

• Glazing - up to 48 mm, including double-chambered

• Heat transfer coefficient - 1.3 W/m²K

• Sound reduction index - 47 MAIN ADVANTAGES

• Possibility of unilateral or bilateral foiling in a wide range of colors: 1600 colors according to RAL palette, including 12 standard imitations of wood;

• 100% recyclable and excellent eco-balance;;

System Sliding evolutionDrive Jetline, intended for construction of sliding doors.

With its classic elegant forms it will add comfort and coziness to any home.

• Construction width of the frame - 132 mm

• Construction width of the sash - 60 mm

• Glazing - up to 32 mm, including double-chambered

• Heat transfer coefficient of the elements - 1.3 W/m²K MAIN ADVANTAGES

• Possibility of unilateral or bilateral foiling in a wide range of colors, including 12 standard imitations of wood;

• 100% recyclable and excellent eco-balance;

(6)

„Mig Market“ PRO 80

Coziness and comfort in your home.

Technical parameters:

• Construction width of the frame - 80 mm

• Glazing - up to 32 mm, including triple glazing

• Heat transfer coefficient - Uf = 1.3 W/m²K

• Thickness of the reinforcing metal - 1.5 mm.

Main advantages:

• Thanks to the 6-chamber frame and 6-chamber water- protecting sash, the system meets in an optimal way the requirements for thermal and noise isolation

• The external walls of the profile are thickened - 3 mm

• Rounded profile with a sense of luxury

• Weather resistant;

• Rounded geometry, easy for cleaning and mainte- nance

• White color with shiny surface;

• Option for wood imitation

(7)

Golden Oak

Turn Only System Tilt & Turn System Double Sash Tilt & Turn System Sliding System

Dark Oak Nussbaum Anthrazit

Types of Windows

Foil Applied Wooden-look

The decoration of your house will be embellished by the warmth of wooden-look window & door systems.

Our wooden-look systems with UV rigid and various color options add meaning & affluence to your decoration.

COUNCILS ON SUGGESTION OF PVC WINDOWS AND DOORS

-Pay attention that durable TPV grey gaskets have beev used in your window and door system.

-Prefer double and threefold double-glazed windows for improved noise and temperature insulation.

-Choose our series suitable to the structure of your building and climate conditions of enviroment.

-You can order our series with wide variery of appearance options depending on your desires and needs.

Adds value to your life with its details.

(8)

The steel reinforcement having the largest possible size guarantees high stability of the product

The specially designed insulating chambers ensure very good thermal insulation properties of the doors.

The glazing can be up to 30 mm thick, which makes it possible to mount most advanced heat-protective and soundproofing glass panels, and also the panel PROFILINK especially designed for this system.

frame depth 60mm 3 chambered system Uf= 1.4 W/m²K

PROFILINK Door

PVC window system with 80 mm wide, 6 chambers convex sash, and 5 chambers frame with 70 mm width.

The special profile of the sash provides protection of the rubber seal against atmospheric influences (sunlight, rain, etc.), which increases the life span of the whole article.

PROFILINK Premium +

This system offers good thermal and sound insulation properties according to the European standards in a very economical solution

The glazing can be up to 30mm thick, which makes it possible to mount most advanced heat-protective and soundproofing glass panes.

The results of the fitness tests in terms of air permeability and tightness during pouring rain meet the highest requirements.

PROFILINK Ultra

Thanks to its additional insulating chambers, this variety offers remarkable heat transfer coefficient.

The glazing can be up to 36mm thick, which makes it possible to mount most advanced heat-protective and soundproofing glass panes.

The results of the fitness tests in terms of air permeability and tightness during pouring rain meet the highest requirements.

PROFILINK Premium

(9)

9 4600 Lift and Slide HI System with thermal break

A new lift and slide door system that exhibits the best thermal insulation in all the sliding range with unbeatable transmission values (UH) from 0.9 (W/m²K)

This maximum energy efficiency is possible thanks to the perfect combination of a thermal breaking zone with 35 & 24 mm polyamide strips and cross-linked polyethylene as well as the possibility of large glazing allowed by the sashes and up to 55 mm thick glass which allows for the option to install compositions of double and triple chamber glass in order to guarantee its exceptional thermal insulation and particularly this system will improve noise protection..

Technical Data

• Maximum glazing: 55 mm.

• Maximum accoustic insulation Rw=43dBA

• Uw from 0.9 (W/m²K)

* Depending on the transmittance of the glass.

Cor-Vision Sliding System with thermal break

An avant-garde design of a thermally broken sliding system that permits maximum luminousity with the minimum amount of seen aluminium profile section. An elegance in design that looks to cover great light spaces with minimum frame fragments of between 9-14% of the total surface. It shows seen centre junction sections of only 20 mm, in the lateral junction at 77 mm and the top/bottom junctions at 57 mm.

Possibility of inlaying the bottom, top and lateral frames.

Possibility of sash meetings at a 90° corner without a mullion.

In its monochannel version, comprising of fixed and sash, the hidden rail is found in the fixed area.

This presents a new type of frame for 2 or 3 rails that allows the incorporation of a stainless steel rail that affords increased sliding smoothness, an increase in loading support for the bearings (up to 320 kg/sash) and increased durability.

A system with traditional fitting procedures with perimetral frame and sashes that allows the sash to be dismantled in case of glass breakage, damage to the aluminium profile etc. It incorporates a rod operated multipoint lock.

Technical Data

• Maximum glazing: 30 mm.

• Maximum accoustic insulation Rw=41 dB

(10)

COR 60 RPT

System with thermal Break that is realized by means of poliamida rods with a 25% of glass fiber of a length of 24 mm.

Possibility of straight and curved leaves and jambs.

Presents the possibility of incorporating hardware with hidden hinges and Evo Security hardware.

Technical data

• Maximum glazing: 46 mm

• Maximum sound insulation Rw = 48 dB

• Consult type, dimension and glass

• CTE- Suitable for climatic zones *: α ABCDE

• Depending on the transmittance of glass.

Cor-70 Industrial system with thermal break

A hinged window system that was conceived with the object of satisfying the needs of a determined market segment for an economical window system, simple but versatile with many features.

With a 70 mm frame depth and Euro Groove opening gearing, this innovation from the R&D Department has thermal transmission from only 0.9 W/m²K in order to adapt to distinct climatic severities and material demands on energy efficiency.

Its simplicity in fitting and reduced need for labour allows for a more industrialised manufacture resulting with time and cost savings at the end.

It features a straight style in both sash and bead.

A glazing capacity of up to 65.5 mm that allows the use of energy efficient glazing and compositions with large thicknesses and affords this system excellent accoustic and thermal features.

Transmittance

• Consult typology, dimension and glass Acoustic insulation

• Maximum sound insulation Rw = 44 d

88

70

88

70

Cor-80 Industrial System with Thermal Break

A new concept of a Euro-Groove hinged system capable of reaching the maximum levels of weather tightness, energy saving and acoustic protection with reduced assembly and fabrication time.

With 80 mm of frame depth, it responds to the most severe climatic demands, and provides an unbeatable degree of energy efficiency thanks to its minimal window transmission value (UH) that can reach 0.8 W/m²K. These minimum values are achieved thanks to the perfect design of the thermal break zone with 45 mm tubular polyamide strips as well as the incorporation of cross-linked polyolefin both in the glazing space as well as the interior of the frame and sash.

Transmittance

• Consult typology, dimension and glass Acoustic insulation

• Maximum sound insulation Rw = 46 dB

• Length of polyamide rod: 45 mm.

88

80

88

80

(11)

11 Aluminum system with thermal bridge M55

• opening system with an interrupted thermal bridge and overall dimensions of the frame 55mm

• the system achieves good thermal insulation properties thanks to the 24mm thermal bridge

• possibility for inserting glass panes with a thickness up to 63mm, including triple glazing

• possibility for inserting hardware for PVC systems

• profiles for outward and inward opening

• option for painting in the whole range according to RAL

Aluminum sliding system without thermal bridge M Slide

• suitable for internal partitions with overall dimensions of the frame

• possibility of inserting fillings with a thickness up to 20mm

• ease of movement

Aluminum system with thermal bridge M70

• opening system with overall dimensions of the frame 70mm

• extremely high thermal insulation properties, thanks to the 39mm thermal bridge

• inserting glass panes with thickness up to 56mm, guaranteeing the use of the latest technologies in this field

• additional medium gasket for even better indicators

• possibility for installation of hardware for PVC systems

(12)

Colours

The blinds with wooden slats / Venetian blinds / are made of bamboo, one of the most sustainable materials in nature. Some bamboo species have strength higher than that of steel (measurements show around 2000kg / cm²). Therefore, the bamboo as a material is used increasingly in the production of furniture, floor mats, blinds and many other items used daily.

Bamboo’s origins are traced back to Asia. There this material is used for thousands of years in different fields, because of its unique qualities. In eastern cultures the bamboo is a symbol of energy and luck and is used in the interior of almost every house in one form or another.

The bamboo blinds are available in 6 natural colors. In every nuance is noticed the beautiful structure of the bamboo, looked closely each slat is an unique model. All visible elements of the bamboo blinds are in the same color as the selected color of the slats.

Width of the slats

The slats of the bamboo blinds are available in two widths 3.5 and of 5 cm. The thickness of 2 mm provides stability of the slats.

Thin ladder

The thin ladder is in the color of the selected slats. It provides a sense of ease of the blinds because they are so thin that the massive slats are hovering in the air.

Wide ladder

The wide textile ladder represents a thin textile strip, which contributes to the pleasant combination between bamboo and textile. The color is the same as that of the slats. The advantage is that in closed position the blind contributes to 100% black out of the room.

(13)

13

MULTI-TRENDLL MACO

FERRURES OF ET OB LA TÉCHNOLOGIE QUI ÉVOLUE

Catalogue

LA TECHNOLOGIE QUI EVOLUE

Catalogue 2012

www.maco.fr

MACO PrOteCt

SERRURES DE PORTES

Open, live intensively, with it your doors are not just a random product, they are a secure and risk-free decision.

MACO provides multi-point locking mechanisms, which are designed both for external entrance doors and interior doors. They satisfies every customer demand.

The main project consist of:

Z-TS= locking mechanism with profile cylinder with key.

• With the key you lock

• With the key you open and close

Z-TS= locking mechanism with handle that is raised up and has a multi-point locking

• Locking is achieved by lifting up the handle and the handle is returned to the open position

• Then the mechanism is blocked with the key and it is locked

One for all ...

The system for hardware for opening sashes of the windows of PVC or wood is used by years.

The module technology of our system offers variants with one design. This is called: one for all ...

Reliable

Do you want to have reliable windows …

• To be opened easily

• To be able subsequently to be upgraded

Comfortable

Do you want to have comfortable windows …

• To look good and be easy to use

• To be of high quality and to have few elements

• Because of this we differ from our competitors

MACO PROTECT

LOCKS FOR ENTRANCE DOORS

MACO MULTI-TREND

TURN AND TILT HARDWARE

(14)

The company ROMB S.A. is with over 40 years of history. Except in Poland, ROMB SYSTEM is well known in Russia, Ukraine, Lithuania, Belarus, Moldova, Serbia and Romania. The German Institute TUV Management Service GmbH е has certified ROMB SYSTEM, with which are ensured the sustainability of the anticorrosion coating of the metal elements of the hardware and its smooth functioning. ROMB SYSTEM can be used in doors and windows, designed for operation in more severe weather conditions.

ROMB DYNAMIC is well appreciated and accepted by all manufacturers of doors and windows.

Hardware with the brand “Romb Dynamic”, having the following advantages:

• additional anticorrosion coating;

• all tilt and turn mechanisms have included lower anti-burglar striker plate;

• all buds are in the form of “sponge” and are rotating. This makes the movement of the hardware easier and smooth;

• all standard striker plates have a small tooth behind which enter the buds of the drive gear. This automatically provides to the overall mechanism a degree of securitisation.

• the hardware has an option for adding “micro-ventilation”, blockage of the handle, catches and etc.

(15)

15 Secustik ^®

0739/US954 Brest Luxembourg Metz

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM

Colors:

Nature

Titanium

Transport white 0738S/US945 100NM ^Metz

Secustik

® 0739/US954BrestLuxembourgMetz Brest Luxembourg099/US952 099S/US952 100NM

0738/US945 0739S/US954 100NM

Colors: Nature Titanium Transport whiteMetz 0738S/US945 100NM

Secustik

® 0739/US954BrestLuxembourgMetz Brest Luxembourg099/US952 099S/US952 100NM

0738/US945 0739S/US954 100NM

Colors: Nature Titanium Transport whiteMetz 0738S/US945 100NM

Secustik^®

0739/US954Brest Luxembourg Metz

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM Colors:

Nature

Titanium

Transport white 0738S/US945 100NM^Metz

Secustik^®

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM Colors:

Nature

Titanium

Secustik^®

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM Colors:

Nature

Titanium

Secustik^®

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM Colors:

Nature

Titanium

Secustik

^®

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM Colors:

Nature

Titanium

Transport white

0738S/US945 100NM^Metz

Secustik

^®

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM Colors:

Nature

Titanium

Transport white

Secustik

^®

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM Colors:

Nature

Titanium

Transport white

Secustik

^®

0739/US954 Brest Luxembourg Metz

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM

Colors:

Nature

Titanium

Transport white 0738S/US945 100NM ^Metz

Secustik

^®

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM

Colors:

Nature

Titanium

(16)

CONTATTI

Baza Nova Ltd Varna 9000, Bulgaria +359 877977045

bazanovaltd@gmail.com

The company has a specialized workshop for production of nonstandard products.

1

Прозорецът на бъдещето.

Ново поколение прозорци

КАЧЕСТВО БЕЗ КОМПРОМИСИ:

Енергийна ефективност, Защита от атмосферни влияния, Опазване на околната среда, Дълъг живот

3

Bamboo blinds

PVC products

Aluminum products

5

„Mig Market“ PRO 80

Technical parameters:

Main advantages:

Types of Windows

Foil Applied Wooden-look

Adds value to your life with its details.

PROFILINK Door

PROFILINK Premium +

PROFILINK Ultra

PROFILINK Premium

9

4600 Lift and Slide HI System with thermal break

Cor-Vision Sliding System with thermal break

COR 60 RPT

Cor-70 Industrial system with thermal break

Cor-80 Industrial System with Thermal Break

11 Aluminum system with thermal bridge M55

Aluminum sliding system without thermal bridge M Slide

Aluminum system with thermal bridge M70

Colours

Width of the slats

Thin ladder

Wide ladder

13

MACO PROTECT

MACO MULTI-TREND

15

Secustik ®

0739/US954 Brest Luxembourg Metz

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM

Colors:

Nature

Titanium

Transport white 0738S/US945 100NM Metz

Secustik

Secustik

Secustik

Nature

Titanium

Transport white

Secustik

Nature

Titanium

Transport white

Secustik

Nature

Titanium

Transport white

Secustik

0739/US954 Brest Luxembourg Metz

Brest Luxembourg

099/US952

099S/US952 100NM

0738/US945

0739S/US954 100NM

Colors:

Nature

Titanium

Transport white 0738S/US945 100NM Metz

Secustik

CONTATTI

Secustik ^®

Transport white 0738S/US945 100NM ^Metz

Transport white 0738S/US945 100NM ^Metz