• Keine Ergebnisse gefunden

AMERICAN MULTISOURCE, INC.

N/A
N/A
Protected

Academic year: 2022

Aktie "AMERICAN MULTISOURCE, INC."

Copied!
3
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

AMERICAN MULTISOURCE, INC.

SM4

Data bus:

16-bit ISA

Size: Three/quarter-length, full-height card Hard drive supported: Two MFM ST506/412 drives

Floppy drives supported:

Four 360KB, 720KB, 1.2MB, 1.44MB drives

 

CONNECTIONS

Function Location

SM4 https://th99.infania.net/c/A-B/20805.htm

1 of 3 5/24/21, 9:29 AM

(2)

34-pin control cable connector - hard drive J1

20-pin data cable connector J2

20-pin data cable connector J3

34-pin connector - floppy drive interface (drives 1 & 2) J4

4-pin connector - drive active LED J5

34-pin connector - floppy drive interface (drives 3 & 4) J6

34-pin connector - floppy drive interface (drives 3 & 4) - external

J7

USER CONFIGURABLE SETTINGS

Function Location Setting

» Floppy drive interface address select primary W8 open

  Floppy drive interface address select secondary W8 closed

» Hard drive address is primary W11 open

  Hard drive address is secondary W11 closed

HARD DRIVE INTERFACE CONFIGURATION

Setting W5 W12

» Enabled pins 2 & 3 closed closed

SM4 https://th99.infania.net/c/A-B/20805.htm

2 of 3 5/24/21, 9:29 AM

(3)

  Disabled pins 1 & 2 closed open

FLOPPY DRIVE INTERFACE CONFIGURATION

Setting W9 W10

» Enabled closed closed

  Disabled open open

Note: The location of W9 is unidentified.

SM4 https://th99.infania.net/c/A-B/20805.htm

3 of 3 5/24/21, 9:29 AM

Referenzen

ÄHNLICHE DOKUMENTE

then note the color coding of the wires at the three switch terminals. Unsolder the wires. The switch and bracket can now be removed between the lead screw

interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If the equipment with

• Features our field-proven Pertec Flexible Disk drive mechanics with write protect and automatic unloading of read/write head and head pressure pad for optimum diskette

This circuit is used to control the flow of write current through the read/write head in response to the direction determined by the WRT DATA interface

Whenever the printer runs out of paper while printing, press HOLD PRINT to interrupt printing and ensure that printing does not start while you are loading

34-pin cable connector - floppy drive J1. 20-pin data cable connector- drive

Unique features of the MPI drives are: • a patented stepper-band positioner • the industry's longest carriage • proprietary clutch and diskette ejector

1. A track 00 sensor that senses when the Head Carriage Assembly is positioned at Track 00. The two index sensors, each of which consists of an LED light source and