[Aai94] A. K. B. A’ain, A.H. Bratt, A.P. Dorey, "Testing Analogue Circuits by Power Supply Voltage Control”, Electronics Letters, Vol. 30, No. 3, pp. 214-215, 1994
[Ahr97] H. Ahrens, "Full-Custom Design eines breitbandigen, temperaturstabilen Operations-verstärkers", Projektarbeit ITEM, Universität Bremen, April 1997
[Alb88] M. Alba, "A System Approach to Smart-Sensors and Smart-Actuators Design”, Sensors and Actuators, Vol. SP-737, pp. 61-73, 1988
[AlQ95] M.A. Al-Qutayri, "Analogue Circuits Testing by a Supply Current Monitor”, IEEE Inter-national Mixed Signal Testing Workshop, Grenoble, France, pp.212-216, 1995
[Alc99] Alcatel Microelectronics 0.7 µm CMOS Library update, "Electrical Parameters CMOS 0.7 µm-C07MA-C07MD, DS13291, Revision 8, 09.04.1999
[All87] P. E. Allen, D. R. Holberg, "CMOS Analog Circuit Design", ed. By. Holt, Rinehart and Winston, 1987
[Ame87] E. A. Amerasekara, D. S. Campell, "Failure Mechanisms in Semiconductor Devices", John Wiley & Sons, Ney York, Chichester, Bisbaine, Toronto, Singapore, 1987
[Ara97] K. Arabi, B. Kaminska, "Efficient and Accurate Testing of Analog-to-Digital Converters Using Oscillation-Test Method”, ED&TC European Design and Test Conference, pp. 348-352, 1997
[Aug95] J.S. Augusto, C.B. Almeida, "Fully Automatic DC Fault Dictionary Construction and Test Nodes Selection for Analogue Fault Diagnosis", poster na ETC’95 (European Design and Test Conference), Paris, 1995
[Bak98] R.J. Baker.W. Li, D.E. Boyce, "CMOS Circuit Design, Layout, AND Simulation”, IEEE Press,New York, 1998
[Ban82] P. Banerjee, J.A. Abraham, "Fault Characterization of VLSI MOS Circuits", Proc. IEEE Int. Conf. Circuits and Computers, New York, pp. 564-568, 1982
[Bin94] R.J. Binns, D. Taylor, T.I. Pritchard, "Testing Linear Macros in Mixed-Signal Systems using Transient Response Testing and Dynamic Supply Current Monitoring”, Electronics Letters, Vol. 30, No. 15, pp. 1216-1217, 1994
[Bin96] R.J. Binns, D. Taylor, T.I. Pritchard, "Generating, Capturing and Processing Supply Current Signatures from Analogue Macros in Mixed-Signal ASICs”, Microelectronic Journal, Vol.
27, pp. 723-729, 1996
[Bir91] A. Birolini, "Qualität und Zuverlässigkeit technischer Systeme”, Springer Verlag, Berlin, 1991
[Bra93] A.H. Bratt, R.J. Harvey, A.P. Dorey, "Aspects of Current Reference Generation and Distribution for IDDx Pass/Fail Current Threshold Determination”, IEE Colloquium on "Mixed-Signal VLSI Test”, digest No 1993/240, pp. 3/1-8, 1993
[Bro93] B. D. Brown, R. D. Mcleod, "Built-in current mode circuit for IDDQ monitoring", Process
[Coo89] W.D. Cooper, "Elektrische Meßtechnik”, VCH Verlagsgesellschaft Weinheim, 1989
[Dam98] K. Damm, "Selbsttest integrierter Sensoren in der Betriebsphase mit den Schwerpunkten Signalübertragung und Signalverarbeitung", Dissertation Universität Bremen, 1998
[Dic78] H. K. Dicken, "What can happen to an IC in your System?”, Evaluation Engineering, pp.
36-40 Jul/Aug, pp. 46-67, 1978
[Edw80] D. G. Edwards, "Testing for MOS Circuits Failure Modes, Proceeding of International Test Conference, pp. 407-416, 1980
[Eig00] H. Eigler, "Mikrosensorik und Mikroelektronik, vom physikalischen Effekt zur Grund-struktur und zum Mikrosystem", expert-Verlag, Renningen, 2000
[Fis00] M. Fischell, D. Westphal, W. Anheier, "Neuer Ansatz zum Selbsttest integrierter Sensoren in der Betriebsphase", ITG-GMM Workshop Mikroelektronik für die Informationstechnik, Darm-stadt, 2000
[Fis01] M. Fischell, S. Latzel, W. Anheier, "Online/Offline Tests für integrierte Sensoren in der Betriebsphase", 13. ITG-GI-Gmm Workshop Testmethoden und Zuverlässigkeit von Schaltungen und Systemen", Miesbach, 2001
[Fis02] M. Fischell, D. Westphal, W. Anheier, "Entwurf eins selbsttestfähigen integrierbaren Meß-verstärkers für Sensoren", 14. ITG-GI-GMM Workshop Testmethoden und Zuverlässigkeit von Schaltungen und Systemen", Bad Herrenalb, 2002
[Fuh00] J. Fuhrmann, M. Fischell, "Untersuchung der Korrelationsmöglichkeiten zwischen Strom-messung und der Ausgangsspannung in einer analogen Schaltung zur Optimierung der Fehlerabdeckung", Studienarbeit ITEM Juni 2000
[Gal80] J. Galiay, Y. Crouzet, M. Vergniault, "Physical versus Logical Fault Models in MOS LSI Circuits, Impact on their Testability", IEEE Trans. Computers, Vol. C-29, No. 6, pp. 527-531, June 1980
[Gar94] J. W. Gardner, "Microsensors, Principles and Applications", John Wiley & Sons, Baffins Lane, Chichester West Sussex, 1994
[Gos90] K. Goser, "Großintegrationstechnik: Teil1: Vom Transistor zur Grundschaltung", Hüthig Verlag, Heidelberg, Seite 4, 1990
[Göp93] W. Göpel, "Sensors in Europe and ‘Eurosensors’: State-of-the-art and the Science in 1992”, Sensors and Actuators, H. 37-38, pp. 1-5, 1993
[Gös93] M. Gössel, S. Graf, "Error Detection Circuits”, McGraw-Hill International (UK) Limited, 1993
[Gra93] P. R. Gray, R. G. Meyer, "Analysis and Design of Analog Integrated Circuits", John Wiley
& Sons, Inc. New York, Chichester, Bisbaine, Toronto, Singapore, 1993
[Hat98] A. A. Hatzopoulos, E. Iatrou, C. Katsaras, d. K. Papakostas, "Testing of analogue and mixed-signal circuits by using supply current measurements", IEE Proceedings circuits devices and systems, Vol. 145, No. 5, 1998
[Haw85] C.F. Hawkins, J. M. Soden, "Electrical characteristics and testing considerations for gate oxide shorts in CMOS ICs" Proceeding of International Test Conference, pp. 544-555, 1985
[Hei98] U. Heiden, "Elektrik + Elektronik: Herausforderung für den Automobilbau", GME Fachtagung, p. 5-13, 1998
[Hur98] S.L. Hurst, "VLSI Testing – digital and mixed analogue/digital techniques”, IEE Circuits, Devices and System Series 9, The Institution of Electrical Engineers, London, 1998
[Hsu93] C. W. Hsue, C. J. Lin, "Built-in current sensor for IDDQ test in CMOS", Proceedings International Test Conference, Page 635-641, 1993
[Ill00] M. Illing, J. Marek, "Mikrosensoren für intelligente Systeme im Kraftfahrzeug", F&M, Nr.
108, Carl Hanser Verlag, München, pp. 78-80, 2000
[Kal95] E. Kaltalioglu, "Defektorientierter Test für integrierte analoge Schaltungen. Bestimmung der Fehlermenge für Teilschaltungen in MOS Technik unter Berücksichtigung von Entwurfsregeln", Dissertation Universität Hannover, 1995
[Kam97] B. Kaminska, K. Arabi, I. Bell, u.a., "Analog and Mixed-Signal Benchmark Circuits-First Release", International Test Conference, Washington, USA, pp. 191-199, 1997
[Kil99] Y. Kilic, M. Zwolinski, "Testing Analog Circuits by Supply Voltage Variation and Supply Current Monitoring”, IEEE Custom Integrated Circuits Conference, pp. 155-158, 1999
[Kol95] V. Kolarik, S. Mir, M. Lubazewski, u.a., "Analog Checkers with absolute and Relative Tolerances”, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 14, No. 5, pp. 607-612, 1995
[Lau01] R. Laur, "Vorlesungsscript Integrierte Schaltungen I", Universität Bremen, 2001
[Lec99] A. Lechner, A. Richardson, B. Hermes, "Reconfiguration-Based Built-In Self-Test for Analogue Front-End Circuits”, 5th IEEE International Mixed Signal Testing Workshop, 1999
[Lee97] E.K.F. Lee, "Reconfigurable Data Converter as a Building Block for Mixed-Signal Test”, Europead Design & Test Conference, CD-ROM Version, 1997
[Lee98] Kuen-Jong Lee, Jing-Jou Tang, "A Built-in Current Sensor Based on Current-Mode Design", IEEE Transactions on circuit and system II, "Analog and digital signal processing, Vol.45, No. 1, 1998
[Lin98] W. M. Lindermeir, T.J. Vogels, H.E. Graeb, "Analog Test Design with IDD Measurements for the Detection of Parametric and Catastrophic Faults”, IEEE Design Automation and Test in Europe (DATE), pp. 822-827, 1998
[Lub95] M. Lubazewski, V. Kolarik, S. Mir, u.a., "Mixed-Signal Circuits and Boards for HIGH Safety Applications, ED&TC, 1995
[Mai98] Y. Maidon, Y. Deval, H. Manhaeve, "Off Chip Monitors and Built In Current Sensors for Analogue and Mixed Testing", IEEE International Workshop on IDDQ Testing, 1998, Page 59-63 [Mal84] W. Maly, F.J. Ferguson, J.P. Shen, "Systematic characterization of physical defects for faults analysis of MOS IC cells, Proceeding of International Test Conference, pp. 390-399, 1984 [Mal85] W. Maly, "Modeling of lithography related yield losses for CAD of VLSI circuits," IEEE Trans. Computer-Aided Design, vol. CAD-4, no. 3, pp. 161-177, July 1985
[Mal87a] W. Maly, M.E. Thomas, J.D. Chinn, u.a. "Double-bridge Test Structures for the Evaluation of Type, Size and Density of Spot Defects", Research Report No. CMUCAD-87-2, Carnegie-Mellon University, Feb. 1987
[Mal87b] W. Maly, "Realistic fault modelling for VLSI testing, "24th ACM/IEEE Design
[Mal88] W. Maly, W. Moore, A. Strojwas, "Yield Loss Mechanisms and Defect Tolerance" in
"Desing for Yield" edited by W. Moore, W.Maly, A. Strojwas, Pub. Adam Hilger, Bristol and Boston, 1988
[Mal92] Wojciech Maly and Marek Patyra, "Build-in Current Testing", IEEE Journal of solid-state circuits, Vol. 27, No. 3, 1992
[Man99] H. Manhaeve, J. Verfaillie, B. Straka, J.P. Cornil, "Application of Supply Current Testing to Analogue Circuits, Toward a structural Analogue Test Methodologie?!”, ETW European Test Workshop, pp. 51-56, 1999
[Mar95] J. Marek, Mikrosystemtechnik im Kfz, GME-Fachbericht 15, Mikroelektronik, Vorträge der GME-Tagung, Baden-Baden, pp.291-300, 1995
[Mar97] C. Márta, V. Székely, M. Renez, u.a., "Self-Checking Current Output Temperature Sensor for DFT”, 3rd IEEE International On-Line Testing Workshop, Crete, Greece, Session 4, 4.2, 1997 [Mai98] Y. Maidon, Y. Deval, H. Manhaeve, "Off Chip Monitors and Built In Current Sensors for Analogue and Mixed Testing", IEEE International Workshop on IDDQ Testing, 1998, Page 59-63 [Möl95] M. Möllendorf, "Mikromechanische Komponenten und Systeme", Mikroelektronik, 3, Sonderbeilage Mikrotechniken, pp. 8-9, 1995
[Mei91] A. Meixner, W. Maly, "Fault Modelling for the Testing of Mixed Integrated Circuits", Proc. Int. Test Conf. pp. 564-572, 1991
[Mid85] S. Middelhoek, A.C. Hoogerwerf, "Smart Sensors: When and Where?", Sensors and Actuators, Vol. 8, No. 1, pp.39-48, 1985
[Mil00] O. Mildenberger, "Einführung in die Mikrosystemtechnik- Grundlagen und Praxisbei-spiele", Vieweg Verlag, Braunschweig/Wiesbaden, 2000
[Naj88] N. Najafi, K.W. Clayton, "IEEE Solid-State Sensor and Actuators Workshop", pp.76-79, 1988
[Olb94] T. Olbrich, A.M. Richardson, D.A. Bradley, "BIST & Diagnosis in Safety Critical Microsystems using Reliability Indicators”, 5th European Symposium on reliability of Electron Devices, Failure Physics and Analysis, pp. 575-580, 1994
[OLB94A] T. Olbrich, D. Bradley, A. Richardson, "Self-Test and Diagnosis for SMART Sensors in Automotive Applications”, IEE Colloquium on Automotive Sensors, S. 3/1-3/4, 1994
[Ohl96a] M.J. Ohletz, "L2RFM – Local Layout Realistic Faults Mapping Scheme for Analogue Integrated Circuits, Custom Integrated Circuits Conference, pp.475-478, 1996
[Ohl96b] M.J. Ohletz, "Realistic Faults Mapping Scheme for the Fault Simulation of Integrated Analogue CMOS Circuits", IEEE International Test Conference, pp.776-785, 1996
[Ohl89] M.J. Ohletz, "Selbsttest monolithischer analog-digitaler Schaltungen, Dissertation Universität Hannover, 1989
[Oss00] A. Osseiran, "IEEE1149.4 Analog and Mixed-Signal Test Bus Standard”, European Test Workshop, pp. 119-123, 2000
[Pan97] Chen-Yang Pan, "Built-In Self-Test and Fault Simulation for Analog/Mixed-Signal Circuits”, Dissertation, University of California, 1997
[Pec01] I. Pecuh, M. Margala, V. Stopjaková, "Low-Voltage Low-Power CMOS Current Monitor”, International Journal of Electronics, Vol. 88, No. 10, pp. 1117-1129, 2001
[Per92] P. Pernards, "Digitaltechnik", Hüthig Verlag, Heidelberg, S. 25-26, 1992
[Pol89] E. Pollino, "Microelectronic Reliability", Volume II, Integrity Assessment and Assurance, Pub. Artech House, INC. 1989
[Pol01] P. Pollok, M. Fischell, "Entwurf eines Built-In Current Sensors (BICS) mit eigener Testaus-wertung für Mixed-Signal Schaltungen", Diplomarbeit Universität Bremen, 2001
[Por95] J. Porazanec, T. Volek, G. Taylor, "Analogue Test in Frequency and Time Domains", IEEE International Mixed Signal Testing Workshop, Grenoble, France, 1995
[Qin00] G. Qin, A. Ge, F.-Y. Wang, "On-Board Fault Diagnosis System Development of Auto-mated Mechanical Transmission”, World Automotive Congress FISITA, Seoul, Korea, 2000
[Res97] R. Rees, "What is Wear & Wearout”, IEEE Transactions on Reliability, Vol. 46, No. 2, p.
163, 1997
[Ren01] C. Renz, M. Fischell, "Entwicklung eines Testcontrollers für eine analoge selbsttestfähige Temperaturmeßschaltung”, Studienarbeit, Universität Bremen, 2001
[Ric95] A. Richardson, T. Olbrich, V. Liberali, u.a., "Design-For-Test Strategies for Analogue and Mixed-Signal Integrated Circuits”, 38th. Mid-West Symposium, Rio-de-Janerio, Brazil, Aug. 1995 [Ric95a] A. Richardson, A. Bratt, I. Baturne, "The aplication of Iddx Test Strategies in Analogue and Mixed Signal IC's”, IEEE International Mixed Signal Testing Workshop, Grenoble, France, pp.206-211, 1995
[Rob93] M. Robert, J.M. Rivière, J.L. Noizette, "Smart Sensors in Flexible Manufacturing Systems”, Sensors and Actuators, H. 37-38, S. 239-246, 1993
[Ros01] R.J. Ross, C. Boit, D. Staab, "Microelectronics Failure Analysis”, ASM International, Ohio, USA, 2001
[She85] J.P. Shen, W. Maly, F.J. Ferguson, "Inductive Fault Analysis of MOS Integrated Circuits", IEEE Design and Test, Vol. 2, pp. 13-26, Dec. 1985
[She93] Tung-Li Shen, James C. Daly, Jien-Chung Lo, "A 2-ns detection time, 2-µm CMOS Built-in current sensBuilt-ing circuit", IEEE Journal of solid-state circuits, Vol. 28, No. 1, 1993
[Sch91] G. Schumicki, P. Seegebrecht, "Prozeßtechnologie - Fertigungsverfahren für integrierte MOS-Schaltungen", Buchreihe Mikroelektronik, Springer-Verlag Berlin Heidelberg, 1991
[Sch95] H. Schaumburg, "Werkstoffe und Bauelemente der Elektrotechnik 8, Sensoranwen-dungen", Teubner 1995
[Sch94] E.Schrüfer, "Elektrische Meßtechnik", Carl Hanser Verlag, München, 1994 [Sed92] R. Sedgewick, "Algorithmen in C++", Addison-Wesley 1992
[Seg94] J. Segura, M. Roca, D. Mateo , A. Rubio, "Built-in dynamic current sensor circuit for digital VLSI CMOS testing", Electronics letters, Vol. 30, No. 20, 1994
[Sen99] "Mikrosystemtechnik, große Fortschritte, kaum sichtbar", Sensor Magazin, No. 4, 03.1999, pp. 32
[Sil95] J.Machado da Silva, J.Silva Matos, I. M. Bell and G. E. Taylor, "Cross-correlation between iDD and vOUT signals for testing analogue circuits.", Electronics Letters, Vol. 31, No. 19, 14th September 1995, pp. 1617-1618
[Sta83] C. Stapper, F. Armstrong, K. Saji, "Integrated Circuit Yield Statistic", Proc. IEEE, Vol.
71,No. 4, pp.453-470, April 1983
[Sto97] V. Stopjakovà, H. Manhaeve, "CCII+ Current Conveyor Based BIC Monitor for IDDQ
Testing of Complex CMOS Circuits", ED&TC ‘97, Page 226-269, 1997
[Str97] C. Stroud, P. Karunaratna, E. Bradley, "Digital Components for Built-In Self-Test of Analog Circuits”, Tenth Annual IEEE International ASIC Conference and Exhibit, pp. 111-115, 1997
[Tan93] J. J. Tang, K. J. Lee, B. D. Liu, "A real time Iddq testing scheme using current conveyor technique", 5th Int. Symp. on IC Technology, Systems and Application, 1993, Page 348-352
[Tan95] A.H. Taner, J.E. Brignell, "Aspects of intelligent Sensor Reconfiguration”, Sensors &
Actuators A, 1995, Quelle, www.ecs.soton.uk/publications/rj/1994/transduc/taner/aspects.html [Tit93] U. Tietze, Ch. Schenk, "Halbleiter Schaltungstechnik”, 10. Auflage, Springer Verlag, 1993 [Tuc76] R.E. Tucker, L.P. McNamee, "Computer-Aided Design Application to S-3A Analog Test Programs”, IEEE Proc. International Testing Conf. AUTOTESTCON, 1976
[Ven98] H. Vendric, "Deep-Submicron CMOS ICs", Kluwer Bedrijfsinformatie b. v. Deventer Netherland, 1998
[Wal87] D.M.H. Walker, "Yield simulation for integrated circuits", Kluwer Academic Publisher, Norwell, Massachusetts, 1987
[Wes00] Detmar Westphal, M. Fischell, "Untersuchung und Optimierung des hybriden Selbsttest-verfahrens für ein Temperaturmeßsystem", Studienarbeit ITEM April 2000
[Wey79] A. H. Weygang, "Fehler an integrierten Halbleiterschaltungen", Elektronik, Heft 12, pp.
55-61, 1979
[Wil78] Q.F. Wilson, D.B. Day, "Practical Automatic Test Program Generation Constraints", Proc.
of Automatic Test Conf. and Workshop, 1978
[Win96] D. Winter, "Entwicklung eines diskreten Temperatursensors", Projektarbeit Universität Bremen, Dezember 1996
[Win97] D. Winter, "Entwicklung eines busfähigen, selbsttestfähigen Temperatursensors", Studien-arbeit Universität Bremen, Januar 1997
[Zim92] G. Zimmer, "Praxis der Mikrosystemtechnik", Seminar, Fraunhofer-Institut für mikro-elektronische Schaltungen und Systeme Duisburg, 1992
[Zwo96] Zwolinski, Chalk, Wilking, "Analogue Fault Modeling and Simulation for Supply Current Monitoring", Dep. of Electronics and Computer Science, University of Southampton, IEEE 0-89791-821/96, 1996