Item Explanation
Font Selects the font.
Settings (default in bold):
Courier, Prestige, Roman, Sans serif, Roman T, Orator S, Sans H, Script, OCR A, OCR B Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi
(characters per inch). You can also choose proportional spacing.
Settings (default in bold):
10cpi, 12cpi, 15cpi, Prop.
Condensed Turns condensed printing on or off.
Settings (default in bold):
Off, On
T.Margin Sets the distance from the top of the page to the baseline of the first printable line. The distance is measured in inches. The smaller the value, the closer the printable line is to the top.
Settings (default in bold):
0.40 ... 0.50 ... 1.50 inch in 0.05-inch increments
Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T.Margin settings, the page length setting automatically returns to the default for each paper size.
Settings (default in bold):
1 ... 66 Lines
CGTable Use the character generator (CG) table option to select the graphics character table or the italics table. The graphics table contains graphic characters for printing lines, corners, shaded areas, international characters, Greek characters, and mathematical symbols. If you select Italic, the upper half of the character table is defined as italic characters.
Settings (default in bold):
PcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic, PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO, PcSl437,PcTurkish1, 8859-9 ISO, Mazowia, CodeMJK, PcGk437, PcGk851, PcGk869, 8859-7 ISO, PcCy855, PcCy866, PcUkr866, PcLit771, Bulgarian, Hebrew7, Hebrew8, PcHe862, PcAr864, PcAr864Ara, PcAr720, PcLit774, Estonia, ISO Latin2, PcLat866
Country Use this option to select one of the fifteen international symbol sets. See the Font Guide for samples of the characters in each country’s symbol set.
Settings (default in bold):
USA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2,LatinAmeric, Korea, Legal
Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the printing position goes beyond the right margin. If you select Off, the printer does not print any characters beyond the right margin and does not perform any line wrapping until it receives carriage-return character. This function is handled automatically by most applications.
Settings (default in bold):
On, Off
Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with each carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On if your text lines overlap.
Settings (default in bold):
Off, On
Item Explanation
Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. This mode will reduce the size of the image being printed, and may also cause some distortion when printing bit image graphics.
Settings (default in bold):
Dark, Light, BarCode
ZeroChar Specifies whether the printer prints a slashed or unslashed zero.
Settings (default in bold):
0, (or the zero character with a slash)
FX Menu
Item Explanation
Font Selects the font.
Settings (default in bold):
Courier, Prestige, Roman, Sans serif, Script, Orator S, OCR A, OCR B
Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per inch). You can also choose proportional spacing.
Settings (default in bold):
10cpi, 12cpi, 15cpi, Prop.
Condensed Turns condensed printing on or off.
Settings (default in bold):
Off, On
T.Margin Sets the distance from the top of the page to the baseline of the first printable line. The distance is measured in inches. The smaller the value, the closer the printable line is to the top.
Settings (default in bold):
0.40 ... 0.50 ... 1.50 inch in 0.05-inch increments
Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T.Margin settings, the page length setting automatically returns to the default for each paper size.
Settings (default in bold):
1 ... 66 Lines
CGTable Use the character generator (CG) table option to select the graphics character table or the italics table. The graphics table contains graphic characters for printing lines, corners, shaded areas, international characters, Greek characters, and mathematical symbols. If you select Italic, the upper half of the character table is defined as italic characters.
Settings (default in bold):
PcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic, PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO Country Use this option to select one of the fifteen international symbol sets. See the Font Guide for
samples of the characters in each country’s symbol set.
Settings (default in bold):
USA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2,LatinAmeric
Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the printing position goes beyond the right margin. If you select Off, the printer does not print any characters beyond the right margin and does not perform any line wrapping until it receives a carriage-return character. This function is handled automatically by most applications.
Settings (default in bold):
On, Off
Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with each carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On if your text lines overlap.
Settings (default in bold):
Off, On
Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. This mode will reduce the size of the image being printed, and may also cause some distortion when printing bit image graphics.
Settings (default in bold):
Dark, Light, BarCode
ZeroChar Specifies whether the printer prints a slashed or unslashed zero.
Settings (default in bold):
0, (or the zero character with a slash)
I239X Menu
Item Explanation
Font Selects the font.
Settings (default in bold):
Courier, Prestige, Gothic, Orator, Script, Presentor, Sans serif
Item Explanation
Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per inch). You can also choose proportional spacing.
Settings (default in bold):
10cpi, 12cpi, 15cpi, 17cpi, 20cpi, 24cpi, Prop.
Code Page Selects the character tables. Character tables contain the characters and symbols used by different languages. The printer prints text based on the selected character table.
Settings (default in bold):
437, 850, 858, 860, 863, 865
T.Margin Sets the distance from the top of the page to the baseline of the first printable line. The distance is measured in inches. The smaller the value, the closer the printable line is to the top.
Settings (default in bold):
0.30 ... 0.40 ... 1.50 inch in 0.05-inch increments
Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T.Margin settings, the page length setting automatically returns to the default for each paper size.
Settings (default in bold):
1 ... 67 Lines
Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the printing position goes beyond the right margin. If you select Off, the printer does not print any characters beyond the right margin and does not perform any line wrapping until it receives a carriage-return character. This function is handled automatically by most applications.
Settings (default in bold):
On, Off
Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with each carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On if your text lines overlap.
Settings (default in bold):
Off, On
Alt. Graphics Turns the Alternate Graphics option on or off.
Settings (default in bold):
Off, On
Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low.
Settings (default in bold):
Dark, Light
ZeroChar Specifies whether the printer prints a slashed or unslashed zero.
Settings (default in bold):
0, (or the zero character with a slash) CharacterSet Selects character table 1 or 2.
Settings (default in bold):
1, 2