[1] Paolo Feraboli, Tyler Cleveland, Patrick Stickler, and John Halpin, “Stochastic laminate analogy for simulating the variability in modulus of discontinuous composite materials”, Elsevier - Composites: Part A, 2010.
[2] P. S. Stelzer, B. Plank, and Z. Major, “Mesostructural Simulation of Discontinuous Prepreg Platelet Based Carbon Fibre Sheet Moulding Compounds Informed by X-ray Computed Tomography”, Nondestructive Testing and Evaluation, 2020.
[3] Paolo Feraboli, Elof Peitso, Francesco Deleo, and Tyler Cleveland,
“Characterization of Prepreg-Based Discontinuous Carbon Fiber/Epoxy Systems”, Journal of Reinforced Plastics And Composites, 2009.
[4] Paolo Feraboli, Elof Peitso, Tyler Cleveland, Patrick B. Stickler, and John C.
Halpin, “Notched behavior of prepreg-based discontinuous carbon fiber/epoxy systems”,Elsevier - Composites: Part A, 2008.
[5] Y. Li, S. Pimenta, J. Singgih, S. Nothdurfter, and K. Schuffenhauer,
“Experimental investigation of randomly-oriented tow-based discontinuous composites and their equivalent laminates”,Composites Part A: Applied Science and Manufacturing, vol. 102, pp. 64–75, 2017,issn: 1359835X. doi:
10.1016/j.compositesa.2017.06.031.
[6] M. Tiefenthaler, P. S. Stelzer, C. N. Chung, V. Reisecker, M. Zoltan,
“Characterization Of The Fracture Mechanical Behavior Of C-SMC Materials”, vol. ,Acta Polytechnica 00(0):1–5, 0000, 2018.
[7] Drew E. Sommer, Sergii G. Kravchenko, Benjamin R. Denos, Anthony J.
Favaloro, and R. Byron Pipes, “Integrative Analysis for Prediction of Process-Induced, Orientation-Dependent Tensile Properties in a Stochastic Prepreg Platelet Molded Composite”, Elsevier - Composites: Part A, 2020.
[8] M. Alves and S. Pimenta, “The influence of 3D microstructural features on the elastic behaviour of tow-based discontinuous composites”,Composite Structures, vol. 251, p. 112 484, 2020,issn: 02638223.doi:
10.1016/j.compstruct.2020.112484.
[9] Sergii G. Kravchenko, Drew E. Sommer, and R. Byron Pipes, “Uniaxial strength of a composite array of overlaid and aligned prepreg platelets”, Elsevier - Composites: Part A, 2018.
[10] Seunghyun Ko, Jinkyu Yang, Mark E. Tuttle, and Marco Salviato, “Effect of the platelet size on the fracturing behavior and size effect of discontinuous fiber composite structures”,Composite Structures, 2019.
[11] Sergii G. Kravchenko, Drew E. Sommer, Benjamin R. Denos, Anthony J.
Favaloro, Clark M. Tow, William B. Avery, and R. Byron Pipes, “Tensile Properties of a Stochastic Prepreg Platelet Molded Composite”,Elsevier -Composites: Part A, 2019.
[12] Bo Cheng Jin, Xiaochen Li, Atul Jain, Carlos Gonzalez, Javier Lorca, and Steven Nutt, “Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg”,Elsevier - Composite Structures, 2017.
[13] Gaurav Nilakantan, Ryan Olliges, Ryan Su, and Steven Nutt, “REUSE
STRATEGIES FOR CARBON FIBER-EPOXY PREPREG SCRAP”,CAMX Conference Proceedings, 2014.
[14] Bruno Boursier and Alfonso Lopez, “Failure Initiation and Effect of Defects in Structural Discontinuous Fiber Composites”,Society for the Advancement of Material and Process Engineering, 2010.
[15] M. Alves, D. Carlstedt, F. Ohlsson, L.E. Asp, and S. Pimenta, “Ultra-strong and stiff randomly-oriented discontinuous composites: Closing the gap to quasi-isotropic continuous-fibre laminates”,Composites Part A: Applied Science and Manufacturing, vol. 132, p. 105 826, 2020,issn: 1359835X. doi:
10.1016/j.compositesa.2020.105826. [Online]. Available:
http://www.sciencedirect.com/science/article/pii/S1359835X20300646. [16] A. Kelly and W. R. Tyson, “Tensile Properties of Fibre-Reinforced Metals:
Copper/Tungsten and Copper/Molybdenum”,J. Mech. Phys. Solids, vol. 13, pp. 329–350, 1965.
[17] Ike Y. Chang and James F. Pratte, “LDF™ Thermoplastic Composites Technology”, Journal of Thermoplastic Composite Materials, vol. 4, no. 3, pp. 227–252, 1991. doi:10.1177/089270579100400302.
[18] J.C. Halpin, “Stiffness and Expansion Estimates for Oriented Short Fiber Composites”, Journal of Composite Materials, vol. 3, no. 4, pp. 732–734, 1969, issn: 0021-9983. doi:10.1177/002199836900300419.
[19] S. B. Visweswaraiah, M. Selezneva, L. Lessard, and P. Hubert, “Mechanical characterisation and modelling of randomly oriented strand architecture and their hybrids – A general review”, Journal of Reinforced Plastics and
Composites, vol. 37, no. 8, pp. 548–580, 2018, issn: 0731-6844. doi:
10.1177/0731684418754360.
[20] M. Selezneva and L. Lessard, “Characterization of mechanical properties of randomly oriented strand thermoplastic composites”,Journal of Composite Materials, vol. 50, no. 20, pp. 2833–2851, 2016,issn: 0021-9983. doi:
10.1177/0021998315613129.
[21] Gianni Nicoletto, Enrica Riva, and Anellino Stocchi, “Mechanical
characterization of advanced random discontinuous carbon/epoxy composites”, Materials Today: Proceedings 3, 2016.
[22] Y. Wan and J. Takahashi, “Tensile properties and aspect ratio simulation of transversely isotropic discontinuous carbon fiber reinforced thermoplastics”, Composites Science and Technology, vol. 137, no. C, pp. 167–176, 2016, issn:
02663538. doi:10.1016/j.compscitech.2016.10.024.
[23] Qitao Guo, Bohan Xiao, Ye Zhang, Bijan Spitzlei, Isamu Ohsawa and Jun Takahashi, Ed., Numerical And Experimental Study Of The ModeI Interlaminar Failure Of Chopped Carbon Fiber Tape Reinforced Thermoplastics, Xi’an, China, 2017.
[24] L. M. Martulli, L. Muyshondt, M. Kerschbaum, S. Pimenta, S. V. Lomov, and Y. Swolfs, “Carbon fibre sheet moulding compounds with high in-mould flow:
Linking morphology to tensile and compressive properties”, Composites Part A:
Applied Science and Manufacturing, vol. 126, p. 105 600, 2019,issn: 1359835X.
doi:10.1016/j.compositesa.2019.105600.
[25] G. Kirupanantham, “Characterisation of discontinuous carbon fibre preforms for automotive applications”, PhD thesis, The University of Nottingham. [Online].
Available: "http://eprints.nottingham.ac.uk/13801/".
[26] L. T. Harper, T. A. Turner, J. Martin, and N. A. Warrior, “Fiber Alignment in Directed Carbon Fiber Preforms - Mechanical Property Prediction”,Journal of Composite Materials, vol. 44, no. 8, pp. 931–951, 2010, issn: 0021-9983.doi:
10.1177/0021998309347769.
[27] N. Balakrishnan and V. B. Nevzorov,A Primer on Statistical Distributions. USa, New Jersey: Wiley, 2003.
[28] H. Krenchel,Fibre reinforcement : theoretical and practical investigations of the elasticity and strength of fibre-reinforced materials. Copenhagen: Akademisk Forlag, 1964.
[29] A. Jain, B. C. Jin, and S. Nutt, “Mean field homogenization methods for strand composites”,Composites Part B: Engineering, vol. 124, pp. 31–39, 2017,issn:
13598368.doi:10.1016/j.compositesb.2017.05.036.
[30] Lielens G., “Micro-Macro Modeling of Structured Materials”, PhD thesis, Universite Catholique de Louvain, Belgium, 1999.
[31] M. Abdul Rasheed, English, PhD thesis, University of Twente, Jul. 2016,isbn:
978-90-365-4151-0.doi:10.3990/1.9789036541510.
[32] B. Chen, P. D. Wu, and H. Gao, “A characteristic length for stress transfer in the nanostructure of biological composites”, Composites Science and
Technology, vol. 69, no. 7-8, pp. 1160–1164, 2009, issn: 02663538. doi:
10.1016/j.compscitech.2009.02.012.
[33] M. Y. Tsai, D. W. Oplinger, and J. Morton, “Improved theoretical solutions for adhesive lap joints”,International Journal of Solids and Structures, vol. 35, no. 12, pp. 1163–1185, 1998,issn: 00207683.doi:
10.1016/S0020-7683(97)00097-8.
[34] Y. Nakashima, S. Yamashita, X. Zhang, H. Suganuma, and J. Takahashi,
“Analytical modelling of the behaviour and scatter of the flexural modulus of randomly oriented carbon fibre strand thermoplastic composites”,Composite Structures, vol. 178, pp. 217–224, 2017, issn: 02638223.doi:
10.1016/j.compstruct.2017.07.006.
[35] S. B. Visweswaraiah, L. Lessard, and P. Hubert, “Interlaminar shear behaviour of hybrid fibre architectures of randomly oriented strands combined with laminate groups”,Composite Structures, vol. 176, pp. 823–832, 2017, issn:
02638223.doi: .
[36] M. Selezneva, S. Roy, L. Lessard, and A. Yousefpour, “Analytical model for prediction of strength and fracture paths characteristic to randomly oriented strand (ROS) composites”, Composites Part B: Engineering, vol. 96,
pp. 103–111, 2016,issn: 13598368.doi:10.1016/j.compositesb.2016.04.017. [37] Z. Hashin, “Failure Criteria for Unidirectional Fiber Composites”,Journal of
Applied Mechanics, vol. 47, no. 2, pp. 329–334, 1980, issn: 0021-8936. doi:
10.1115/1.3153664.
[38] S. Pimenta and P. Robinson, “An analytical shear-lag model for composites with ‘brick-and-mortar’ architecture considering non-linear matrix response and failure”, Composites Science and Technology, vol. 104, pp. 111–124, 2014,issn:
02663538. doi:10.1016/j.compscitech.2014.09.001.
[39] Yizhuo Li and Soraia Pimenta, “Development and assessment of modelling strategies to predict failure in tow-based discontinuous composites”, Composite Structures, 2018.
[40] S. Pimenta and P. Robinson, “An analytical shear-lag model for brick and mortar composites considering non-linear matrix response and failure”, Composites Science and Technology, 2014.
[41] S. Pimenta and J. Henry, “Semi-analytical simulation of aligned discontinuous composites”, Composites Science and Technology, 2017.
[42] L. T. Harper, C. Qian, T. A. Turner, S. Li, and N. A. Warrior, “Representative volume elements for discontinuous carbon fibre composites – Part 1: Boundary conditions”, Composites Science and Technology, vol. 72, no. 2, pp. 225–234, 2012, issn: 02663538. doi:10.1016/j.compscitech.2011.11.006.
[43] M. Smith,ABAQUS/Standard User’s Manual, Version 6.14, English. United States: Dassault Systèmes Simulia Corp, 2014.
[44] S. Nakamura and R. S. Lakes, “Finite element analysis of Saint–Venant end effects in micropolar elastic solids”, Engineering Computations, vol. 12, no. 6, pp. 571–587, 1995, issn: 0264-4401.doi:10.1108/02644409510799785. [45] Y. Pan, L. Iorga, and A. A. Pelegri, “Numerical generation of a random
chopped fiber composite RVE and its elastic properties”, Composites Science and Technology, vol. 68, no. 13, pp. 2792–2798, 2008,issn: 02663538. doi:
10.1016/j.compscitech.2008.06.007.
[46] Y. Sato, J. Takahashi, T. Matsuo, I. Ohsawa, K. Kiriyama, and S. Nagoh,
“Elastic Modulus Estimation of Chopped Carbon Fiber Tape Reinforced Thermoplastics using the Monte Carlo Simulation”, 2013. [Online]. Available:
https://pdfs.semanticscholar.org/247b/
6aaa3ec31e1668352d664dafe8c56482635a.pdf(visited on 07/02/2020).
[47] J. C. H. Affdl and J. L. Kardos, “The Halpin-Tsai equations: A review”, Polymer Engineering & Science, vol. 16, no. 5, pp. 344–352, 1976. doi:
10.1002/pen.760160512.
[48] D. E. Sommer, S. G. Kravchenko, B. R. Denos, A. J. Favaloro, and R. B. Pipes,
“Integrative analysis for prediction of process-induced, orientation-dependent tensile properties in a stochastic prepreg platelet molded composite”,
Composites Part A: Applied Science and Manufacturing, vol. 130, p. 105 759, 2020,issn: 1359835X. doi:10.1016/j.compositesa.2019.105759.
[49] A. J. Favaloro, D. E. Sommer, B. R. Denos, and R. B. Pipes, “Simulation of prepreg platelet compression molding: Method and orientation validation”, Journal of Rheology, vol. 62, no. 6, pp. 1443–1455, 2018,issn: 0148-6055. doi:
10.1122/1.5044533.
[50] P. Linde, J. Pleitner, H. de Boer, C. Carmone, Ed.,Modelling and Simulation of Fibre Metal Laminates.
[51] Salmi M., Stiffness and failure modeling of discontinuous long fiber composites. [52] Kilic MH., Ed.,nonlinear 3D micromechanical and structural framework for
analysis of discontinuous long-fiber thermoplastic composites. 2014.
[53] Kilic MH, Ed.,Multi-scale modeling of discontinuous longfibre composites.2014.
[54] e-Xstream Engineering,Digimat User’s Manual, 2019.
[55] H. Schürmann,Konstruieren mit Faser-Kunststoff-Verbunden, 2., bearbeitete und erweiterte Auflage, ser. VDI-Buch. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2007,isbn: 9783540721895.doi:
10.1007/978-3-540-72190-1. [56] Hexcel,HexMC User Guide,
https://www.hexcel.com/Resources/DataSheets/HexMC-Molding-Compound, [Online; accessed 10-May-2018], 2014.