• Keine Ergebnisse gefunden

Correction to: Fretting Wear and Scratch Resistance of Cold‑Sprayed Pure Cu and Ti

N/A
N/A
Protected

Academic year: 2022

Aktie "Correction to: Fretting Wear and Scratch Resistance of Cold‑Sprayed Pure Cu and Ti"

Copied!
1
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

Vol:.(1234567890)

Metallography, Microstructure, and Analysis (2021) 10:514 https://doi.org/10.1007/s13632-021-00772-4

1 3

CORRECTION

Correction to: Fretting Wear and Scratch Resistance of Cold‑Sprayed Pure Cu and Ti

Rodolpho F. Váz

1

 · Alessio Silvello

1

 · Pasquale D. Cavalière

2

 · Sergi Dosta

1

 · Irene G. Cano

1

 · Laura Capodieci

3

 · Antonella Rizzo

3

 · Daniele Valerini

3

Published online: 2 September 2021

© ASM International 2021

Correction to: Metallography, Microstructure, and Analysis https:// doi. org/ 10. 1007/ s13632- 021- 00758-2

In this article, authors Laura Capodieci, Antonella Rizzo, and Daniele Valerini at affiliation ENEA—Italian National Agency for New Technologies, Energy and Sustainable Eco- nomic Development, Brindisi, Italy, were missing from the author list.

The original article has been corrected.

Publisher's Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

The original article can be found online at https:// doi. org/ 10. 1007/

s13632- 021- 00758-2.

* Pasquale D. Cavalière

pasquale.cavaliere@unisalento.it

1 Thermal Spray Center CPT, Universitat de Barcelona, Barcelona, Spain

2 Department of Innovation Engineering, University of Salento, Lecce, Italy

3 ENEA - Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Brindisi, Italy

Referenzen

ÄHNLICHE DOKUMENTE

Energy efficiency regulation has the smallest coefficient of the three and is the only instrument to partially have statistical significance at only the 5% level (in column 3),

Technological choices largely determine the long-term characteristics or industrial society, including impacts on the natural em·ironmcnt. the treatment o[ technology

The cost calculations in this analysis show that costs estimates that incorporate learning effects can be lower than future cost estimates published in the literature (see Table

Solow (1057) by formulating the problem opened a new perspective in quantitative studies of technical progress. He found that the increase in productivity is far greater than

56 We do so however not in the sense of building some grand theory of the new Network (or) Information Society 57 but examine narrowly and specifically the effects of

• The influence of testing frequency and hence contact temperature on fretting behavior of Ti-6Al-4V was investigated. The fretting damaged surfaces were analyzed at

The resource consumption of telecommunication and information systems Assessments of particular technologies usually focus on at least one of five main limited

This does not necessarily mean that the introduction of new telecommun- ications systems would lead t o a reduced consumption of energy or material: user-system