Volltext
Well 1 (Producer)
Depth [m MD]
Depth [m
TVD] Completion
KOP [m
MD] Inclination
870 870 20 inch 250 4°
2010 1812 13 3/8 inch 880 44°
2819 2408 9 5/8 inch 2220 42°
3741 2947 7 inch 2850 58°
Well 2 (Injector)
Depth [m MD]
Depth [m
TVD] Completion
KOP [m
MD] Inclination
880 880 20 inch 250 4°
2311 1980 13 3/8 inch 880 44°
3345 2610 9 5/8 inch 2220 42°
4443 2723 Open Hole 2850 58°
ÄHNLICHE DOKUMENTE
The spinner measures the liquid flow velocity in the well over the range of depth that the instrument is run, changes in flow velocity not associated with hole diameter
liner, equipped with couplings with opening ports, is initially tight and does not allow communication between the inner space of liner and the annular space. During the
12 doing, we distinguish between four levels of car quality: new vehicles, used cars sub- mitted by dealers for inspection up to three months before purchase, those privately
This tubing pressure is transferred to the running tool and afterwards into the setting chamber of the Velox STV upper hydraulic pack-off (individual setting) or
Figure 8 (top) shows the time domain signal y(t ) of the recorded accelerometer data with indicated events for both resonant structures.. It has to
Installation” Corrosion Rates versus Watercut and Wellhead Velocity ..28 Figure 12 – Downhole Corrosion Rates versus Watercut and Wellhead Velocity...29 Figure 13 – “Surface
This paper reports preliminary results from measurements of frozen ice samples, the achievable signal intensities, standard deviations and calibration graphs as well as the
According to the Commission Decision nr.1152/2003, the European Parliament and the Council of June 16, 2003, the European Commission and EU Member States decided to implement
