ÄHNLICHE DOKUMENTE
Multiple program statements may appear on a single line, if separated by a (:) colon.. When the user types a left-arrow (under-line or RUBOUT on some
• Install the equipment cabinets by mechanically jOining them and connecting the Power Control Module (PCM) and Power Dis- tribution Unit (PDU) cabling; supervise
(Remember the $ if you use an INPUT statement.) So far so good! Let's try multiple variables now. Don't forget to erase the two unnecessary lines that result. So much for
If no damage is apparent, open the shipping container and remove documentation, mounting hardware, and cables.. Check materials received in option
Now that you are sure that the system comes up correctly under AMOS/L 1.3, you can make your LSYS.MON file the default so that the system will use this file to boot when you
On read Record: In indicates the M5B of record-type code from data field address mark. On any Write Track: It indicates a Write Protect This bit is reset
Transmissions that are received with correct parity and valid type field are indicated by asserting ACK on the bus during the second time slot after the
COmmunications Management User's Guide binder for more specific information about remote access connections and setups using the optional AT&T UNIX PC