Windows Manual Set

Make sure that the correct paper size and paper source are set in the control panel or printer driver. Too many sheets may be loaded in the MP tray or

To print on thick paper, be sure to change the Paper Type setting in the printer driver settings.. Choose Thick Narrow for thick paper which is less than 160

To print using the AppleTalk protocol and configure the network interface with EpsonNet Config for Macintosh, select Ethernet or Built-in Ethernet on the AppleTalk Control Panel or

Before printing, open the printer driver window, and confirm the print settings such as the media type, paper size.. Checking the

A While watching the inside of the printer over the front cover, press the button to feed the roll paper and adjust the cutting position to the mark on the left side of the

Select the desired setting or enter the value using the numeric keypad, and then press the button.. Press the (Start) button to begin

If a user-specified print media is loaded in the multipurpose feeder (MPF), you must specify the paper size setting by using the print

Select the desired address or fax number from the address book when using the Scan to E-mail or Scan to Network feature, or sending faxes1. For more information, see “Address