• Keine Ergebnisse gefunden

WORLDWIDE SALES AND SERVICE FACILITIES

N/A
N/A
Protected

Academic year: 2022

Aktie "WORLDWIDE SALES AND SERVICE FACILITIES "

Copied!
4
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)
(2)

MOD B

The WANGCO Mod 8 is a low-cost, highly reliable digital magnetic recording system which is ideal for small computers, data communications systems, key tape systems, and data conversion systems. Fully IBM-compatible, the Mod 8 has been designed to plug into most low-cost systems controllers.

With standard tape speeds of 12.5, 25 and 37.5 inches per second, data is written and read at densities of 200, 556, 800, or 1600 characters per inch. The Mod 8 accepts IBM hub-compatible reels up to 81f2 inches in diameter. IBM-compatible 7-track and ANSI-compatible 9-track versions are standard.

Consisting of a tape transport, transport electronics, data electronics, and a power supply, the Mod 8 has an extremely simple, reliable design. In addition, it has many exclusive features which enhance performance, reliability, and ease of operation well beyond other tape handling systems in its price range.

Among the unique Mod 8 features are (1) the use of IBM head guide spacing for reliable tape interchange, (2) variable electronic write deskewing in each channel for NRZI, and (3) a tri-Ievel read threshold including a programmable level for recovery of marginal data. In addition, a simple tape-threading path and a quick- action, hold-down knob permit convenient threading and unloading in a matter of seconds.

(3)

SPECIFICATIONS

Tape Speed

12.5,18.75,25 or 37.5 ips Data Density 9-track

800 cpi NRZI 1600 cpi PE Data Density 7-track

800/556 cpi NRZI 800/200 cpi NRZI 556/200 cpi NRZI Start/Stop Time

15.0 ± 1.0 ms at 25 ips 30.0 ± 2.0 ms at 12.5 ips 10.0 ± 0.7 ms at 37.5 ips Instantaneous Speed Variation

± 4% maximum Variation, Average Speed

± 1% maximum

Start Distance 0.17 ± 0.02 in.

Stop Distance 0.19 ± 0.02 in. Rewind Speed

100 ips nominal for 37.5 and 25 ips operating speed 50 ips nominal for 12.5 ips operating speed Dynamic Skew

75 microinches, maximum Static Skew, WRITE

Electronic Skew compensation (NRZI) Static Skew, READ

100 microinches, maximum Reel Size

up to 8V2 in. diameter, IBM-hub compatible

Number of Tracks

7, IBM-compatible, NRZI only 9, ANSI-compatible

Recording Mode

NRZI IBM-ANSI or phase-encoded Head Type

Dual or Single Gap Tape Tension

8.0 ± 0.5 oz.

Tape

Computer grade, 0.5 in. wide, 1.5 mil thick Electronics

Silicon solid-state and 930 series DTL logic Interface

DTL logic (low true) Weight

57 lb. Mounting

Standard 19 in. rack mount Power

110-125 VAC ± 10% 1 Amp.

220-250 VAC ± 10% .5 Amp.

48-62 Hz.

Operating Temperature 40° to 90° F

Non-operating Temperature 30° to 140° F

Relative Humidity (Operating) 20 to 80%, non-condensing Relative Humidity (Non-operating)

15 to 95%, non-condensing Altitude

o

to 20,000 ft.

NRZI AND PHASE-ENCODING FORMATTERS AVAILABLE.

CONTACT US FOR DETAILED TECHNICAL DATA.

(4)

WORLDWIDE SALES AND SERVICE FACILITIES

5404 JANOY PLACE. LOS ANGELES. CALIF. 90066 213/390-8081

Referenzen

ÄHNLICHE DOKUMENTE

The evidence in Exhibits 19 and 25 clearly indicates that there are sufficient grounds to instigate a research, development, and monitoring program. In addition,

However, in this case the variable justification capacity of the system will be reduced to a minimum also (1 opportunity per 10 frames). Thus limiting values of I N

READ-PUNCH 80 to 90 column card s. Read-Punch functions do not interlock proces- sor, both reading and punching can overlap printing, processing and reading by

Write Checking:- A Write Check operation during tape writing provides an automatic check of each character as it is recorded. A programmed Erase-before-Write

If larger, the execute subroutine will wait until a punch instruction is completed and a reserve area is released to the worker program.. Otherwise, the next

It provides high reliability and easy maintenance, optimum IBM compatibility, operation with most mini-computer controllers, and many exclusive features for

In the context of developing countries, systems analysis has been used on problems like these: routing and scheduling the buses in Baroda, India; developing the water and power uses

interest (e.g., a new town setting). The rank ordered issues are commonly understood by members of the system of interest and thus might be called a goal set. However, no effort