• Keine Ergebnisse gefunden

It SYSTEMS

N/A
N/A
Protected

Academic year: 2022

Aktie "It SYSTEMS"

Copied!
2
0
0

Wird geladen.... (Jetzt Volltext ansehen)

Volltext

(1)

CO~PUTER SYSTEMS

..,.j

2360 BERING DRIVE, SAN JOSE, CA 95131 Phone: (408) 946·6700

January 20, 1983

AL'IOS-586 Computer System

XENIX Development System Release Notes Version 1.OA Revision B.

INSTALLATION PROCEDURE

1) Install the Xenix Run-Time System, using the instructions given in the Altos 586 Computer System Operator's Guide.

2) Login as "root"

3) Enter "cd

I"

4) For each "Utility" diskette, follow these steps:

4.1) load the diskette 4 • 2) enter "tar xv"

4 . 3) When you have loade::1 all of the Utility diskettes, enter "install"

5) Now load the

"c"

compiler diskette 5.1) enter "tar xv"

5 . 2) enter "install"

6) This step is optional. If you wish to load the UNIX Fortran Compiler, follow these steps:

8.1) load the "f77" diskette 8 .2) enter "cd Ibnp"

8.3 enter "tar xv"

8.4 enter "install"

7) Your Xenix Development System has now been fully installe::1.

xeni:c Notes

These release notes also describe how to transfer files between the ACS-8600 and ACS-586 computer systems, or between two ACS-586 computer systems, or between the ACS-586 and other computer systems which support serial communications.

F77 Notes

1) The operation of f77 is described in: UNIX Programmer's Manual, Volume 2B: I". portable Fortran 77 compiler.

2) 'Ibo many intrinsic functions, or too many logical operators in the same statement can cause the error: "floating-point exception".

It means that the expression is too complicate::1 and should be split into several statements.

3) Files are opene::1 at end-of-file. Use the REVJIND statement to get to the beginning.

P/N:69~-13148-~01

(2)

2360 BERING DRIVE, SAN JOSE, CA 95131 Phone: (4081946-6700

COMPUTER SYSTEMS

December 13, 1982

Dear Customer:

Enclosed are your Xenix Development System diskettes. To install the Xenix Development System on your ACS-586 Computer System, follow this procedure:

1) Install the Xenix Run-Time System, using the instructions given in the Altos 586 Computer System Operator's Guide.

2) Login as "root"

3) Enter "cd I"

4) For each "Utility" diskette, follow these steps:

4.1) load the diskette 4.2) enter "tar xv"

4.3) When you have loaded all of the Utility diskettes, enter "install"

5) Now load the nCR compiler diskette 5.1) enter "tar xv"

5.2) enter "install"

6) This step is optional. If you wish to load the UNIX Fortran Compiler, follow these steps:

8.1) load"the "F77" diskette 8.2) enter "cd Itmp"

8.3) enter "tar xv"

8.4) enter "install"

7) Your Xenix Development System has now been installed.

fully

ALTOS COMPUTER SYSTEMS

1

P~~T NUMBER:69~-13147-~~1

Referenzen

ÄHNLICHE DOKUMENTE

The physical memory locations of statements following an ASEG are determined at assembly time by the absolute location counter, which defaults to ~ and may be

• An Oberon track message in the upper part of the menu frame. • The Oberon mark message. • Messages of type Viewers. All other messages are simply passed on to the menu frame

exact formatting 'is done by some macro package, and if none is supplied the references will not be printed. By default, the references are numbered

The symbol number references a table (Character and Symbol Definition Table) defined by the Device Definition Table item for the selected output device... The

instruction is found in a Text field, the system includes pages from the document named in the Include instruction. Choose this ITEM to insert math formulas

Chapter 1, "Installing and Setting Up the Operating System," describes how to initially install and set up the operating system, reconfigure ports for

The library used by the lax(~) command has been renamed from I~ib/libln.a to Ilib/libl.a to conform with the description in the XENIX Development System

Using the example above, if your local computer is machine2 and you want to send a copy of lusrlmarktltransfile on machine} to the lusrlcindy directory