262 N/mm2 FH Augsburg – Studiengang Bauingenieur Bearbeiter: Prof

FHA Anschlüsse

Stahlbau Schrauben

Grundaufgaben Seite 1/1

Provided, the Gusset plate is made of S355, the properties of the connecting welds should be:

Correlation factor taken from EN 1993-1-8 – 4.5.3.2 Table 4.1:

βw = 0,9 for S355 with fu = 510 N/mm²

Partial safety factor taken from EN 1993-1-8 – 2.2 Table 2.1 footnote:

γM2 = 1,25

Design shear strength according to EN 1993-1-8 – 4.5.3.3 eq. (4.4) f,vw,d = fu / (βw * γM2 * √3)

f,vw,d = 510 N/mm² / (0,9 * 1,25 * √3) = 262 N/mm²

FH Augsburg – Studiengang Bauingenieur Bearbeiter: Prof. Dr. P. Knödel

Baumgartner Str. 16, D-86161 Augsburg Bearbeitungsstand: 26.04.2007

Tel. +49(0) 821 – 5586 – 102, Fax – 110 Druck tt.04.jj 09:02

fba-b@rz.fh-augsburg.de /tmp/jodconverter_e4c7df3a-b9f3-42e3-9317-3fabd09121b3/tempfile_5106.doc