N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
enndaten
Elektrische Eigenschaften
Elektrische Eigenschaften / Electrical properties Höchstzulässige Werte / Maximum rated values
Periodische Vorwärts- und Rückwärts-Spitzensperrspannung repetitive peak forward off-state and reverse voltages
Tvj = -40°C... Tvj max VDRM,VRRM 200 400 600
V V V Vorwärts-Stossspitzensperrspannung
non-repetitive peak forward off-state voltage
Tvj = -40°C... Tvj max VDSM 200 400 600
V V V Rückwärts-Stossspitzensperrspannung
non-repetitive peak reverse voltage
Tvj = +25°C... Tvj max VRSM 250 450 650
V V V Durchlassstrom-Grenzeffektivwert
maximum RMS on-state current
ITRMSM 800 A
Dauergrenzstrom average on-state current
TC = 85 °C ITAVM 568 A
Dauergrenzstrom average on-state current
TC = 55 °C, θ = 180°sin, tP = 10 ms ITAVM 780 A Durchlaßstrom-Effektivwert
RMS on-state current
ITRMS 1220 A
Stossstrom-Grenzwert surge current
Tvj = 25 °C, tP = 10 ms
Tvj = Tvj max, tP = 10 ms ITSM 6300
5500 A A Grenzlastintegral
I²t-value
Tvj = 25 °C, tP = 10 ms Tvj = Tvj max, tP = 10 ms
I²t 198
151 10³ A²s 10³ A²s Kritische Stromsteilheit
critical rate of rise of on-state current
DIN IEC 60747-6 f = 50 Hz, iGM = 0,6 A, diG/dt = 0,6 A/µs
(diT/dt)cr 200 A/µs
Kritische Spannungssteilheit critical rate of rise of off-state voltage
Tvj = Tvj max, vD = 0,67 VDRM
5.Kennbuchstabe / 5th letter F
(dvD/dt)cr 1000 V/µs
Charakteristische Werte / Characteristic values Durchlassspannung
on-state voltage
Tvj = Tvj max, iT = 1500 A Tvj = Tvj max, iT = 500A
vT max.
max.
1,63 1,12
V V Schleusenspannung
threshold voltage
Tvj = Tvj max V(TO) 1,0 V
Ersatzwiderstand slope resistance
Tvj = Tvj max rT 0,4 mΩ
Durchlasskennlinie 100 A ≤ iT ≤ 2800 A on-state characteristic
vT = A +B⋅iT +C ⋅ln(iT +1) +D⋅ iT
Tvj = Tvj max A=
B=
C=
D=
8,819E-01 6,172E-05 -8,686E-02 3,321E-02 Zündstrom
gate trigger current
Tvj = 25 °C, vD = 12V IGT max. 150 mA Zündspannung
gate trigger voltage
Tvj = 25 °C, vD = 12V VGT max. 1,4 V Nicht zündender Steuerstrom
gate non-trigger current
Tvj = Tvj max, vD = 12V Tvj = Tvj max, vD = 0,5 VDRM
IGD max.
max.
5 2,5
mA mA Nicht zündende Steuerspannung
gate non-trigger voltage
Tvj = Tvj max, vD = 0,5 VDRM VGD max. 0,2 V
Haltestrom holding current
Tvj = 25°C, vD = 12V IH max. 200 mA Einraststrom
latching current
Tvj = 25°C, vD = 12V, RGK ≥ 10 Ω iGM = 0,6 A, diG/dt = 0,6 A/µs, tg = 20 µs
IL max. 620 mA
Vorwärts- und Rückwärts-Sperrstrom forward off-state and reverse current
Tvj = Tvj max
vD = VDRM, vR = VRRM
iD, iR max. 30 mA Zündverzug
gate controlled delay time
DIN IEC 60747-6 Tvj = 25 °C, iGM = 0,6 A, diG/dt = 0,6 A/µs
tgd max. 3 µs
prepared by: H.Sandmann date of publication: 2009-11-30
approved by: M.Leifeld revision: 3.1
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
Thermische Eigenschaften Mechanische Eigenschaften
Elektrische Eigenschaften / Electrical properties Charakteristische Werte / Characteristic values Freiwerdezeit
circuit commutated turn-off time
Tvj = Tvj max, iTM = ITAVM
vRM = 100 V, vDM = 0,67 VDRM
dvD/dt = 20 V/µs, -diT/dt = 10 A/µs 4.Kennbuchstabe / 4thletter O
tq typ. 200 µs
Thermische Eigenschaften / Thermal properties Innerer Wärmewiderstand
thermal resistance, junction to case
Kühlfläche / cooling surface beidseitig / two-sided, θ = 180°sin beidseitig / two-sided, DC Anode / anode, θ = 180°sin Anode / anode, DC
Kathode / cathode, θ = 180°sin Kathode / cathode, DC
RthJC
max.
max.
max.
max.
max.
max.
0,062 0,055 0,092 0,085 0,162 0,155
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W Übergangs-Wärmewiderstand
thermal resistance, case to heatsink
Kühlfläche / cooling surface beidseitig / two-sides einseitig / single-sides
RthCH
max.
max.
0,015 0,030 °C/W
°C/W Höchstzulässige Sperrschichttemperatur
maximum junction temperature
Tvj max 140 °C
Betriebstemperatur operating temperature
Tc op -40...+140 °C
Lagertemperatur storage temperature
Tstg -40...+150 °C
Mechanische Eigenschaften / Mechanical properties Gehäuse, siehe Anlage
case, see annex
Seite 3
page 3 Si-Element mit Druckkontakt
Si-pellet with pressure contact Anpresskraft
clamping force
F 3...6 kN
Steueranschlüsse control terminals
Gate (flat)
Gate (round, based on AMP 60598) Kathode / cathode
A 2,8x0,5 Ø 1,5 A 4,8x0,5
mm mm mm Gewicht
weight
G typ. 70 g
Kriechstrecke creepage distance
6 mm
Schwingfestigkeit vibration resistance
f = 50 Hz 50 m/s²
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
Massbild
1 2
4 5 1: Anode / Anode
2: Kathode / Cathode 4: Gate
5: Hilfskathode/
Auxiliary Cathode
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
R,t – Werte Diagramme Diagramme
Trans. Wärmewid. beidseitig
Analytische Elemente des transienten Wärmewiderstandes Z
thJCfür DC Analytical elements of transient thermal impedance Z
thJCfor DC Kühlung /
Cooling Pos. n 1 2 3 4 5 6 7
R
thn[°C/W] 0,00138 0,00480 0,01087 0,02436 0,01359 - - beidseitig
two-sided
τ
n[s] 0,00040 0,00135 0,00685 0,14400 0,82500 - - R
thn[°C/W] 0,00138 0,00480 0,01073 0,02573 0,04236 - - anodenseitig
anode-sided
τ
n[s] 0,00040 0,00135 0,00685 0,18400 1,57000 - - R
thn[°C/W] 0,00138 0,00480 0,01073 0,02573 0,11236 - - kathodenseitig
cathode-sided
τ
n[s] 0,00040 0,00135 0,00685 0,21400 2,57000 - -
Analytische Funktion / Analytical function: Z
thJC=
nn=1Σ
maxR
thn1 − e
τ-tnb a c
0,00 0,02 0,04 0,06 0,08 0,10 0,12 0,14 0,16 0,18
0,001 0,01 0,1
t [s]1 10 100
Z thJC [°C/W]
Transienter innerer Wärmewiderstand für DC / Transient thermal impedance for DC Z thJC = f(t)
a - Anodenseitige Kühlung / Anode-sided cooling b - Beidseitige Kühlung / Two-sided cooling c - Kathodenseitige Kühlung / Cathode-sided cooling
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
Durchlasskennlinie
Erhöhung des Z
th DCbei Sinus und Rechteckströmen mit unterschiedlichen Stromflusswinkeln Θ Rise of Z
th DCfor sinewave and rectangular current with different current conduction angles Θ
∆Z
th Θ rec/ ∆Z
th Θ sinKühlung / Cooling Θ = 180° Θ = 120° Θ = 90° Θ = 60° Θ = 30°
∆Z
th Θ rec[°C/W] 0,01387 0,02408 0,03241 0,04576 0,07162 beidseitig
two-sided ∆Z
th Θ sin[°C/W] 0,00683 0,01098 0,01691 0,02785 0,05295
∆Z
th Θ rec[°C/W] 0,01369 0,02382 0,03210 0,04539 0,07120 anodenseitig
anode-sided
∆Z
th Θ sin[°C/W] 0,00666 0,01075 0,01665 0,02751 0,05255
∆Z
th Θ rec[°C/W] 0,01368 0,02380 0,03208 0,04536 0,07118 kathodenseitig
cathode-sided ∆Z
th Θ sin[°C/W] 0,00665 0,01072 0,01662 0,02747 0,05253
Z
th Θ rec= Z
th DC+ ∆Z
th Θ recZ
th Θ sin= Z
th DC+ ∆Z
th Θ sinT
vj= T
vj max0 500 1.000 1.500 2.000 2.500 3.000
0,5 0,7 0,9 1,1 1,3 1,5 1,7 1,9 2,1 2,3 2,5
VT [V]
iT [A]
Grenzdurchlasskennlinie / Limiting on-state characteristic iT = f(vT) Tvj = Tvjmax
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
Durchlassverluste
180°120°
90°
60°
θ = 30°
0 100 200 300 400 500 600 700
0 50 100 150 200 250 300 350 400 450
ITAV [A]
PTAV [W]
0°
0
180°Durchlassverlustleistung / On-state power loss PTAV = f(ITAV)
Sinusförmiger Strom / Sinusoidal current
Parameter: Stromflusswinkel Θ / Current conduction angle Θ
180°
120°
90°
60°
θ = 30°
20 40 60 80 100 120 140
0 50 100 150 200 250 300 350 400 450
I TAV [A]
T C [°C]
0°
0
180°Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAV) Sinusförmiger Strom / Sinusoidal current
Beidseitige Kühlung / Two-sided cooling
Parameter: Stromflusswinkel Θ / Current conduction angle Θ
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
Tc
DC180°
120°
90°
60°
θ = 30°
0 100 200 300 400 500 600 700 800 900
0 100 200 300 400 500 600 700
ITAV [A]
PTAV [W]
0°
0
180°Durchlassverlustleistung / On-state power loss PTAV = f(ITAV)
Rechteckförmiger Strom / Rectangular current Parameter: Stromflusswinkel Θ / Current conduction angle Θ
DC 180°
120°
90°
60°
θ = 30°
20 40 60 80 100 120 140
0 100 200 300 400 500 600 700
I TAV [A]
T C [°C]
0°
0
180°Höchstzulässige Gehäusetemperatur / Maximum allowable case temperature TC = f(ITAV)
Rechteckförmiger Strom / Rectangular current Beidseitige Kühlung / Two-sided cooling
Parameter: Stromflusswinkel Θ / Current conduction angle Θ
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N Steuerkennlinie
Zündverzug
0,1 1 10 100
1 10 100
iG [mA]1000 10000 100000
vG [V] Tvj max = +140°C Tvj = -40°C
a
b c d
Tvj = +25°C
Steuercharakteristik vG = f (iG) mit Zündbereichen für VD = 12 V Gate characteristic vG = f (iG) with triggering area for VD = 12 V
Höchstzulässige Spitzensteuerverlustleistung / Maximum rated peak gate power dissipation PGM = f (tg) : a - 40W / 10ms b - 80W / 1ms c - 100W / 0,5ms d – 150W / 0,1ms
100 1000 10000
1 10
-di/dt [A/µs]100
Qr [µAs]
iTM = 1000A
10A 20A 50A 100A 200A 500A
Sperrverzögerungsladung / Recovered charge Qr = f(di/dt) Tvj= Tvjmax, vR ≤ 0,5 VRRM, VRM = 0,8 VRRM
Parameter: Durchlassstrom / On-state current iTM
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
0-50V 0,33 VRRM 0,67 VRRM
0 1 2 3 4 5 6
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Anzahl Pulse bei 50Hz Sinus Halbwellen Number of pulses for 50Hz sinusoidal half waves IT(OV)M [kA]
Typische Abhängigkeit des Grenzstromes IT(OV)M von der Anzahl für eine Folge von Sinus Halbwellen bei 50Hz. Parameter: Rückwärtsspannung VRM
Typical dependency of maximum overload on-state current IT(OV)M as a number of a sequence of sinusoidal half waves at 50Hz. Parameter: peak reverse voltage VRM
IT(OV)M = f (pulses, VRM) ; Tvj = Tvjmax
N
Netz-Thyristor Phase Control Thyristor
Datenblatt / Data sheet
T580N
Nutzungsbedingungen
Die in diesem Produktdatenblatt enthaltenen Daten sind ausschließlich für technisch geschultes Fachpersonal bestimmt. Die Beurteilung der Geeignetheit dieses Produktes für die von Ihnen anvisierte Anwendung sowie die Beurteilung der
Vollständigkeit der bereitgestellten Produktdaten für diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen.
In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, für die wir eine liefervertragliche Gewährleistung übernehmen. Eine solche Gewährleistung richtet sich ausschließlich nach Maßgabe der im jeweiligen Liefervertrag enthaltenen Bestimmungen. Garantien jeglicher Art werden für das Produkt und dessen Eigenschaften keinesfalls übernommen.
Sollten Sie von uns Produktinformationen benötigen, die über den Inhalt dieses Produktdatenblatts hinausgehen und insbesondere eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem für Sie zuständigen Vertriebsbüro in Verbindung (siehe www.infineon.com). Für Interessenten halten wir Application Notes bereit.
Aufgrund der technischen Anforderungen könnte unser Produkt gesundheitsgefährdende Substanzen enthalten. Bei Rückfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem für Sie zuständigen Vertriebsbüro in Verbindung.
Sollten Sie beabsichtigen, das Produkt in Anwendungen der Luftfahrt, in gesundheits- oder lebensgefährdenden oder
lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir für diese Fälle - die gemeinsame Durchführung eines Risiko- und Qualitätsassessments;
- den Abschluss von speziellen Qualitätssicherungsvereinbarungen;
- die gemeinsame Einführung von Maßnahmen zu einer laufenden Produktbeobachtung dringend empfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Maßnahmen abhängig machen.
Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben.
Inhaltliche Änderungen dieses Produktdatenblatts bleiben vorbehalten.
Terms & Conditions of usage
The data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application.
This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics.
Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.infineon.com). For those that are specifically interested we may provide application notes.
Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you.
Should you intend to use the Product in aviation applications, in health or live endangering or life support applications, please notify. Please note, that for any such applications we urgently recommend
- to perform joint Risk and Quality Assessments;
- the conclusion of Quality Agreements;
- to establish joint measures of an ongoing product survey, and that we may make delivery depended on the realization of any such measures.
If and to the extent necessary, please forward equivalent notices to your customers.
Changes of this product data sheet are reserved.