CORRECTION
Correction to: reduced order modeling of selective laser melting:
from calibration to parametric part distortion
Chady Ghnatios
1&Khalil El Rai
1&Nicolas Hascoet
2&Pierre-Adrien Pires
3&Jean-Louis Duval
3&Jon Lambarri
4&Jean-Yves Hascoet
5&Francisco Chinesta
2#The Author(s) 2021
Correction to: Int J Mater Form
https://doi.org/10.1007/s12289-021-01613-z
The article
“Reduced order modeling of selective laser melt-ing: from calibration to parametric part distortion
”, written by Chady Ghnatios, Khalil El Rai, Nicolas Hascoet, Pierre- Adrien Pires, Jean-Louis Duval, Jon Lambarri, Jean-Yves Hascoet, Francisco Chinesta was originally published elec- tronically on the publisher’s internet portal on 31 March 2021 without open access. With the author(s)’ decision to opt for Open Choice the copyright of the article changed on 15 June 2021 to © The Author(s) 2021 and the article is forthwith distributed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adapta- tion, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons li- cence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a
credit line to the material. If material is not included in the article
’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://
creativecommons.org/licenses/by/4.0.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adap- tation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, pro- vide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visithttp://creativecommons.org/licenses/by/4.0/.
Publisher’s note Springer Nature remains neutral with regard to jurisdic- tional claims in published maps and institutional affiliations.
The online version of the original article can be found athttps://doi.org/
10.1007/s12289-021-01613-z
* Chady Ghnatios cghnatios@ndu.edu.lb Pierre-Adrien Pires
Pierre-Adrien.Pires@esi-group.com Jean-Louis Duval
jean-louis.duval@esi-group.fr Jon Lambarri
jon.lambarri@tekniker.es Jean-Yves Hascoet
jean-yves.hascoet@ec-nantes.fr Francisco Chinesta
francisco.chinesta@ensam.eu
1 Mechanical Engineering Department, Notre Dame
University-Louaizé, Box 72, Keserwan, Zouk Mosbeh, PO, Lebanon
2 PIMM Laboratory & ESI Group Chair, Arts et Métiers, Institute of Technology, CNRS, Cnam, HESAM Université, 151 boulevard de l’Hôpital, 75013 Paris, France
3 ESI Group, Bâtiment Seville, 3bis rue Saarinen, 50468, Rungis, France
4 TEKNIKER, Parke Teknologikoa, Iñaki Goenaga, 5, 20600 Eibar, Gipuzkoa, Spain
5 GeM Institute, Ecole Centrale de Nantes, 1 rue de la Noe, 44321 Nantes Cedex 3, France
https://doi.org/10.1007/s12289-021-01638-4
Published online: 4 August 2021
International Journal of Material Forming (2021) 14:987
