ÄHNLICHE DOKUMENTE
Une fois l’imprimante connectée à votre ordinateur, vous devez installer le logiciel inclus sur le CD-ROM « Pilotes d’impression EPSON Stylus™ PRO » livré avec
(1) When executIng a specific command, the CD-ROM drive shifts to MESSAGE IN phase and transfers DISCON- NECT message to the initiator. The CD-ROM drive continues
After the MODE SELECT command is received, the drive returns Check Condition Status (Sense Key : Unit Attention) and sets sense key to Mode Select Parameter Changed for the
After your drive and SCSI controller are installed, it is time to make the right software device driver files available to support your new controller. Turn on your computer and
If you have an external Plextor CD-ROM drive, you will be able to include it in your daisy chain of other external SCSI peripherals with the cable we have provided (if at least one
If you already have other SCSI peripherals (e.g., hard disk, scanner, tape drive) connected to the board, you will need a daisy chain cable that can connect one board to multiple
If you have an external Plextor CD-ROM drive, you will be able to include it in your daisy chain of other external SCSI peripherals with the cable we have provided (if at least one
Following shows an example of linked command (two TYPE 1 command) implementation. 1) The initiator performs ARBITRATION phase and gains the control of SCSI bus.